Nanoporous Al‐Ni‐Co‐Ir‐Mo High‐Entropy Alloy for Record‐High Water Splitting Activity in Acidic Environments

Ir‐based binary and ternary alloys are effective catalysts for the electrochemical oxygen evolution reaction (OER) in acidic solutions. Nevertheless, decreasing the Ir content to less than 50 at% while maintaining or even enhancing the overall electrocatalytic activity and durability remains a grand challenge. Herein, by dealloying predesigned Al‐based precursor alloys, it is possible to controllably incorporate Ir with another four metal elements into one single nanostructured phase with merely ≈20 at% Ir. The obtained nanoporous quinary alloys, i.e., nanoporous high‐entropy alloys (np‐HEAs) provide infinite possibilities for tuning alloy's electronic properties and maximizing catalytic activities owing to the endless element combinations. Particularly, a record‐high OER activity is found for a quinary AlNiCoIrMo np‐HEA. Forming HEAs also greatly enhances the structural and catalytic durability regardless of the alloy compositions. With the advantages of low Ir loading and high activity, these np‐HEA catalysts are very promising and suitable for activity tailoring/maximization.     

Biosynthesis of lipids and organic acids by Yarrowia lipolytica strains cultivated on glucose

The biochemical behavior of wild‐type or genetically modified (presenting decreased expression of intracellular acyl‐CoA oxidases) Yarrowia lipolytica strains cultivated on commercial glucose was studied. Flask nitrogen‐limited cultures were performed favoring the production of organic acids (and potentially the accumulation of lipid). Nitrogen depletion induced secretion of citric acid, while intracellular lipid was not produced in high quantities. Maximum total citric acid up to 49 g/L (yield 0.85 g/g glucose) was produced. In some of the wild‐type strains, an increase of glucose in the medium also induced noticeable production of acetic acid. Increasing the amount of added glucose led to an increase in the total lipid quantity (%) produced, although in the stationary growth phase the concentration of lipid declined, indicating lipid degradation even for the genetically modified strains. Total lipid amount did not exceed the value of 14%, while neutral fractions increased with increase in glucose concentration. In all cases, the total microbial lipids and major lipid fractions were composed of C₁₆ and C₁₈ (principally unsaturated) fatty acids. Finally, in several of the strains cultured in media containing a low glucose concentration, unicellular morphology was observed, while at high glucose concentrations mycelia were predominant.     

Modelling of axis feed consumed energy for sustainable manufacturing

The accurate evaluation of electrical energy demanded by a CNC toolpath during a machining process is essential to determine its efficiency. Actually, the dynamic behavior of cutting forces seems to be neglected by investigators despite its influence on the consumed cutting energy during a face milling operation. This paper aims to investigate the effect of dynamic behavior of the machining system in order to take into account the dynamic response of the cutting forces on the axis feed power prediction. A dynamic cutting power model is developed in order to predict the consumed cutting energy. A parametric study is performed in order to show the impact of cutting conditions on the consumed energy values. The numerical results are compared to experimental ones.     

Dielectric properties of SBR vulcanizates loaded with HAF carbon black and BaTiO3 ceramics

The influence of HAF carbon black and BaTiO₃ ceramic powder contents in SBR vulcanizates on the dielectric constant (ε′) at different frequencies and at fixed temperature of 303 K is studied well in this article. The temperature dependence of the ac conductivity (σ_ac) was also studied. ε′ appreciably decreases as frequency increased for both filled and unfilled SBR vulcanizates. At each frequency, ε′ gradually decreased with BaTiO₃ loading, but its change at any fixed frequency with BaTiO₃ filler loading is not uniform. For HAF group ε′ (at loading ≥ 40 phr), drops rapidly with frequency. Meanwhile, it increased appreciably beyond a certain HAF filler loading (≈ 20 phr). Experimental values of the dielectric constant of both BaTiO₃ and HAF contents were compared with those calculated by using Tsangaris, Clausius and Bruggman models. Tsangaris model with simple modifications was applied and a fairly good agreement was obtained. The HAF particles or aggregates was found to take the shape of oblate ellipsoids with the minor axes parallel to the applied frequency as detected from the decreasing behavior of the depolarizing factor (Y) with HAF contents. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2227–2234, 2007     

New control charts for monitoring the Weibull percentiles under complete data and Type‐II censoring

In this paper, we propose 3 new control charts for monitoring the lower Weibull percentiles under complete data and Type‐II censoring. In transforming the Weibull distribution to the smallest extreme value distribution, Pascaul et al (2017) presented an exponentially weighted moving average (EWMA) control chart, hereafter referred to as EWMA‐SEV‐Q, based on a pivotal quantity conditioned on ancillary statistics. We extended their concept to construct a cumulative sum (CUSUM) control chart denoted by CUSUM‐SEV‐Q. We provide more insights of the statistical properties of the monitoring statistic. Additionally, in transforming a Weibull distribution to a standard normal distribution, we propose EWMA and CUSUM control charts, denoted as EWMA‐YP and CUSUM‐YP, respectively, based on a pivotal quantity for monitoring the Weibull percentiles with complete data. With complete data, the EWMA‐YP and CUSUM‐YP control charts perform better than the EWMA‐SEV‐Q and CUSUM‐SEV‐Q control charts in terms of average run length. In Type‐II censoring, the EWMA‐SEV‐Q chart is slightly better than the CUSUM‐SEV‐Q chart in terms of average run length. Two numerical examples are used to illustrate the applications of the proposed control charts.     

Prediction of fiber orientation distribution in injection molded parts using Moldex3D simulation

In the automotive industry, glass‐filled thermoplastics are used in air intake manifolds, radiator tanks, and many other parts. However, widespread application of glass‐filled thermoplastic materials has been limited in many cases by the inability to accurately predict performance and durability. Since a more accurate fiber orientation prediction will lead to more accurate local mechanical property predictions, this work investigated a recently proposed mathematic model of fiber suspension rheology, which considers the anisotropic fiber diffusion and fiber–matrix interaction from a microscopic viewpoint. The new model proved able to predict many details of the fiber orientation distribution and could be applied advantageously as part of the product and manufacturing development processes. POLYM. COMPOS., 35:671–680, 2014. © 2013 Society of Plastics Engineers     

Conductive Recyclable Organogel Composites

As the use of automation in industry accelerates, the development of flexible, electrically conducting materials with the requisite environmental resilience for impact‐resistant sensors, foldable electronics, and electrostatic shielding are needed; simultaneously, recyclability for these materials remains a crucial attribute. Traditional conductive stretchable materials, such as rubbers, are not recyclable, and hydrogel materials have limited applications due to water evaporation and operating temperature range. Comparatively, organogels can be formulated with enhanced tunability, matrix recyclability, and the ability to support many conductive fillers. Here, rheology, mechanical testing, and electrochemical impedance spectroscopy (EIS) characterize the nanoscale interactions between carbon fillers, the liquid phase, and the network matrix in hemiaminal dynamic covalent network (HDCN) organogels. HDCN chemical equilibria are shown to strongly influence macroscopic gel properties, while HDCN composites exhibit very high conductivities up to 9.95 mS cm^?1 appropriate for sensing applications, demonstrating promise as recyclable alternatives for conductive stretchable materials.     

Percolation phenomena in carbon black–filled polymeric concrete

Percolation in carbon black‐filled polymeric concrete, is discussed based on the measured changes in electrical conductivity and morphology of the composite at different concentrations of carbon black. The percolation threshold ranged between 6 and 7 wt% (based on resin weight) of carbon black. Above this concentration, the filler particles formed agglomerates in contact with each other, suggesting that the conduction process is nearly ohmic in nature. A power law predicted by percolation theory described the behavior of the conductivity as a function of carbon black content. Microscopic analysis showed the presence of a continuous structure formed by the polyester resin and carbon black, in which silica particles were embedded.     

Dynamic rheological behavior and morphology of poly(trimethylene terephthalate)/poly(ethylene octene) copolymer blends

The dynamic rheology and morphology of poly(trimethylene terephthalate) and maleic anhydride grafted poly(ethylene octene) composites were investigated. A specific viscoelastic phenomenon, that is, a second plateau, appeared at low frequencies and exhibited a certain dependence on the content of elastomer particles and the temperature. This phenomenon was attributed to the formation of an aggregation structure of rubber particles. The analyses of the dynamic viscoelastic functions suggested that the heterogeneity of the composites was enhanced as the particle content or temperature increased. The microstructural observation by scanning electron microscopy confirmed that maleic anhydride could react with the end groups of poly(trimethylene terephthalate) to form a stable interfacial layer and result in a smaller dispersed‐phase particle size due to the reduced interface tension. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010