Interaction between a coke and a tar. 2. Limit of tar penetration in coke porosity

The limit of penetration of a given coal-tar pitch into two cokes during mixing of the coke and liquid tar has been studied. It was shown that tar penetration is limited by compression of gas occluded in pores. Mercury porosimetry of cokes and pyrolysed coke-tar mixtures as well as micrographs of cokes impregnated with tar allow one to estimate the limiting pore diameter of tar penetration into coke at ca. 6 μm for the system considered.     

Easily made and handled carbon nanocones for scanning tunneling microscopy and electroanalysis

Well-formed carbon nanocones at the ends of micrometer-diameter carbon fibers (CFs) were fashioned into functional tips for scanning tunneling microscopy (STM) and miniaturized voltammetric sensors. Sharpening of single graphite filaments was achieved by simple DC electrochemical etching in 0.1 N NaOH. Operated as STM tips, pointed CFs resolved in air the contour and surface morphology of a nanoscopic Au line pattern and imaged in vacuum a Si (1 1 1) surface with clear atomic resolution. Subjecting already etched CFs to tip-sparing insulation with electrodeposited paint produced conical carbon ultramicroelectrodes (UMEs) with effective radii down to about 900 nm. Comparative cyclic voltammetry trials in alkaline, neutral and acidic solutions showed that the conical carbon UME’s had a wider practical potential window for electroanalytic applications than, for instance, Pt disk UMEs. The CF-based conical sensors described here are exceptionally easy to make with simple laboratory equipment and perform well in STM topography imaging and voltammetry. The inherent simplicity of sensor production widens the field of potential users, and offers clear advantages over existing types of UMEs, in particular those based on carbon nanotubes, which are especially hard to handle in an optical microscope setting.     

Positive DC Coronas with Arbitrary Outer-Conductor Geometries

The two-dimensional Poisson's equation for a positive dc corona in air with arbitrarily-shaped boundaries-is solved using numerical methods. Solutions to the problem give the potential, electric field, space charge density, ion trajectories, and current density for all points in the field of interest, and the corona current flowing to any boundary. Good agreement is obtained between the theory and experimental measurements.     

Dynamic Fracture Characterization of Al2O3 and SiCw/Al2O3

The dynamic stress intensity factors, which were determined with newly developed bar impact facilities and a new data reduction procedure, for an Al₂O₃ ceramic and 29 vol% SiC_w/Al₂O₃ composite were virtually identical, thus indicating that the short SiC whiskers were ineffective under dynamic fracture. SEM studies revealed five distinct fracture morphologies with increased percentage area of transgranular fracture in both materials with rapid crack propagation. Also, the high dynamic stress intensity factor caused multiple microscopic crack planes to form and then join as the crack advanced.     

Uncertainties in the fate of nitrogen I: An overview of sources of uncertainty illustrated with a Dutch case study

This study focuses on the uncertainties in the fate of nitrogen (N) in the Netherlands. Nitrogen inputs into the Netherlands in products, by rivers, and by atmospheric deposition, and microbial and industrial fixation of atmospheric N₂ amount to about 4450 Gg N y^–1. About 60% of this N is transported out of the Netherlands in products. The fate of the remaining 40%, however, is less clear. We discuss uncertainties in losses to the atmosphere (as ammonia or through denitrification), by leaching and runoff, and in N accumulation in biomass and soils. These processes may account for the fate of about 40% of the N in the Netherlands, and for the fate of about 60% of the N in Dutch agricultural soils. Reducing uncertainties in the estimates of these fluxes is necessary for reducing the impact of excess N in the environment. In particular, monitoring the environmental effects of ammonia emissions and nitrate leaching to groundwater and aquatic systems requires an increased understanding of the fate of N. Uncertainties arise because (1) some N fluxes cannot be measured directly and are usually quantified indirectly as the balance in N budgets, (2) direct measurements of N fluxes have inevitable inaccuracies, (3) lack of experimental data and other information (e.g. statistics) needed for upscaling, (4) large spatial and temporal variability of fluxes, and (5) poor understanding of the processes involved. These uncertainties can be reduced by additional experimental studies and by further development of process-based models and N budget studies. We prioritize these future research needs according to a range of different criteria.     

Carbon nanotubes and onions from carbon monoxide using Ni(acac)2 and Cu(acac)2 as catalyst precursors

New catalyst precursors (copper and nickel acetylacetonates) have been used successfully for the synthesis of carbon nanotubes and onion particles from carbon monoxide. Catalyst nanoparticles and carbon products were produced by metal-organic precursor vapour decomposition and catalytic disproportionation of carbon monoxide in a laminar flow reactor at temperatures between 705 and 1216 °C. Carbon nanotubes (CNTs) were formed in the presence of nickel particles at 923-1216 °C. The CNTs were single-walled, 1-3 nm in diameter and up to 90 nm long. Hollow carbon onion particles (COPs) were produced in the presence of copper particles at 1216 °C. The COPs were from 5 to 30 nm in diameter and consisted of several concentric carbon layers surrounding a hollow core. The results of computational fluid dynamics calculations to determine the temperature and velocity profiles and mixing conditions of the species in the reactor are presented. The mechanisms for the formation of both CNTs and COPs are discussed on the basis of the experimental and computational results.     

Dietary diversity and associated factors among beneficiaries of 77 child care centers: Central Regional,Venezuela

The aim of this study was to estimate household measure diet quality, using a dietary diversity score, and its associated demographic and socio-economic factors. One hundred fifty three households representatives of the Capital District and Miranda State belonging of seventy seven day care children centers were studied. To gather data on dietary diversity, we used the food register method, collecting data on household food availability during a month. Dietary diversity at day care centers of the Capital District was 46 foods differed from that found, in Miranda State was 39 foods (p = 0.005). Likewise it differed in beneficiaries' households of the Capital District was 33 foods compared to those in Miranda State was 25 foods (p = 0.000). There were 13 and 14 foods more between day care centers and the households in both states. State (Capital District or Miranda), money spent on food per person, households size and social level were variables that explained 28.9% of dietary diversity variation in households studied. Households in the Capital District had less members, spent more money on food, and a greater proportion were non-poor compared to those in Miranda. These factors could partially explain differences in diet quality among households in the two States. Whatever perspective studied indicates that the dietary diversity had a statistically significant difference between day care centers and households in states studied. Miranda State was more deficiency than Capital District. Higher dietary diversity reflects a better quality diet at day care centers compared to households studied.     

Nanoparticle Synthesis by Copper (II) Acetylacetonate Vapor Decomposition in the Presence of Oxygen

Crystalline nanometer-sized Cu 2 O and CuO particle formation was studied by vapor thermal decomposition of copper (II) acetylacetonate in a vertical laminar flow reactor at ambient pressure. Experiments were carried out at 3 furnace temperature profiles (maximum values of t furn = 432, 596, 705°C) and with 2 carrier gases (oxygen/nitrogen with mixture ratios of 0.5/99.5 and 10.0/90.0). The results of computational fluid dynamics simulations are presented. The introduction of oxygen into the system was found to increase the decomposition rate and removed impurities from particles. The size of produced primary particles varied from 10 to 200 nm. Particle crystallinity was found to depend on both the oxygen concentration and the furnace temperature. A model taking into account the detailed chemical reaction mechanisms during the particle formation is proposed. The model allows one to build a dynamic phase diagram of the condensed products formed during the decomposition and is in good agreement with the experimental results.