Deterministic and stochastic assessment of the harmonic currents consumed by discharge lamps

The paper examines the deterministic and stochastic behavior of magnetic ballast discharge lamps. Expressions to deterministically calculate the harmonic currents of discharge lamps are provided and analytical expressions of the probability density functions of these harmonic currents are obtained. The results are validated with experimental measurements.     

Remote plasma etching of titanium nitride using NF3/argon and chlorine mixtures for chamber clean applications

To avoid plasma induced erosion of chamber hardware, the application of remote plasma sources to activate the etch gases was introduced. We present results on the etch behaviour of titanium nitride (TiN) using mixtures of NF₃, Cl₂ and argon. The gas mixture was excited in a remote plasma source and then routed through a reaction chamber to study the etch behaviour of TiN samples which simulate the situation at the chamber walls. The dependency of the TiN etch rate on temperature, gas flow, composition and pressure was examined. While the temperature (studied in the range 25-300 °C) turned out to be the most sensitive parameter, the general etch rate was mainly dependent on the availability of atomic fluorine. Etch products and NF₃/Cl₂ dissociation have been monitored by quadrupole mass spectrometry and infrared spectroscopy. While NF₃ showed a high decomposition up to 96%, chlorine decomposition was not observed. However the addition of chlorine increased the etch rates up to 260% in the low pressure/low temperature regime. Surface effects of chlorine addition are indicated by X-Ray Photoelectron Spectrometry and REM surface analysis.     

Public key cryptography based privacy preserving multi-context RFID infrastructure

In this paper, we propose a novel radio frequency identification (RFID) infrastructure enabling multi-purpose RFID tags realized by the use of privacy preserving public key cryptography (PKC) architecture. The infrastructure ensures that the access rights of the tags are preserved based on the spatial and temporal information collected from the RFID readers. We demonstrate that the proposed scheme is secure with respect to cryptanalytic, impersonation, tracking, replay, and relay attacks. We also analyze the feasibility of PKC implementation on passive class 2 RFID tags, and show that the requirements for PKC are comparable to those of other cryptographic implementations based on symmetric ciphers. Our numerical results indicate PKC based systems can outperform symmetric cipher based systems, since the back end servers can identify RFID tags with PKC based systems approximately 57 times faster than the best symmetric cipher based systems.     

DFC++ Processing Framework Concept

Development of modern Software Defined Radio (SDR) based communication systems can be accelerated significantly by the use of processing frameworks. The evolution of SDR and the involved departure from digital representations of classical radio architecture towards more abstract software systems raises new requirements of increased flexibility and versatility. The proposed Data Flow Control for C++ (DFC++) processing framework concept addresses those requirements by employing modern programming techniques and flow control mechanisms to allow for variable data rates, dynamic paths, and flexible component designs. Another important trend is the integration of various embedded platforms in the software radio domain. The rapidly increasing performance and efficiency of embedded processors enables the deployment of SDR systems in more space and power constrained environments. Therefore covering a heterogeneous hardware selection becomes increasingly important for processing frameworks. By relying exclusively on C++ and minimizing external dependencies, DFC++ is specifically aiming for excellent portability and adaptability to support a wide range of current and future software radio projects while maintaining high performance and ease of use. This paper introduces the key aspects of the DFC++ concept and implementation with focus on the reference pointer based data transport mechanisms responsible for the propagation of user data between different processing components.     

Biasing a differential pair in low-voltage analog circuits: a systematic approach

This paper deals with a systematic approach to the common mode and the differential mode biasing of a differential transistor pair. Four different variants will be shown, two of these variants show practical importance; a practical circuit of one of these variants turns out to be the traditional long-tailed pair. This variant is mainly suited, if the input signal operates at voltage level, whereas another variant has great advantages if operation at current level occurs. Besides, the latter variant turns out to be very favorable in circuits operating with a single low supply voltage. Two practical circuits based on this variant are given.     

Toughening of a Particulate-Reinforced Ceramic-Matrix Composite by Thermal Residual Stress

The micromechanics involved in increased crack growth resistance, K _R, due to the addition of TiB₂ particulate in a SiC matrix was analyzed both experimentally and theoretically. The fractography evidence, in which, the advancing crack was attracted to adjacent particulates, was attributed to the tensile region surrounding a particulate. Countering this effect is the compressive thermal residual stress, which results in the toughening of the composite, in the matrix. This thermal residual stress field in a particulate-reinforced ceramic-matrix composite is induced by the mismatch in the coefficients of thermal expansion of the matrix and the particulate when the composite is cooled from the processing to room temperature. The increase in K _R of the composite over the monolithic matrix, which was measured by using a hybrid experimental-numerical analysis, was 77%, and compared well with the analytically predicted increase of 52%. The increase in K _R predicted by the crack deflection model was 14%. Dependence of K _R on the volume fraction of particulates, f _p, and of voids, f _v, is also discussed.     

Dynamic Fracture Responses of Alumina and Two Ceramic Composites

A hybrid experimental-numerical procedure was used to characterize the dynamic fracture response of alumina (Al₂O₃) and TiB₂-particulate/SiC-matrix and SiC-whisker/Al₂O₃-matrix composites. Unlike metals and polymers, dynamic arrest stress intensity factors (SIFs) did not exist in the monolithic ceramics and the two ceramic composites considered. Thus a running crack in these materials cannot be arrested by lowering the driving force, i.e., the dynamic SIF. Fractography study of the alumina specimens showed that the area of transgranular failure varied from about 3% to about 16% for rapid crack extensions in statically and impact loaded specimens, respectively. The influence of kinematic constraints which enforces transgranular flat crack extension, despite the higher fracture energy of transgranular fracture, is discussed.     

Stability regions of Schur andG-stable polynomials

The paper presents a unified approach to calculation, for a given, nominal,G-stable polynomial, a corresponding stability region in the space of perturbed coefficientsOn leave from Institute of Electrical Engineering, 04-703 Warsaw, ul. Pozaryskiego 28, Poland.     

Influence of the density of states on the open-circuit voltage in small-molecule solar cells

Open-circuit voltages are strongly dependent on the density-of-states in solar cells based on disordered semiconductors. In this work, organic solar cells based on tetraphenyldibenzoperiflanthene and fullerene C₇₀ with a bilayer structure were fabricated to investigate the variation in the density-of-states with the substrate temperature during deposition of the donor. The maximum open circuit voltage was reached at a substrate temperature of 60 °C. Organic thin-film transistors were also fabricated to study their electrical properties, such as the mobility and the density-of-states. Finally, an organic solar cell with p–i–n structure was fabricated at the optimized substrate temperature, and a power conversion efficiency of almost 4% was obtained.