SELECTIVITY STUDIES IN THE PHOTOCHLORINATION OF METHANE II: EFFECT OF THE RADIATION SOURCE OUTPUT POWER AND OUTPUT SPECTRAL DISTRIBUTION

The effect of the output power and output spectral distribution of the radiation energy fed to a photoreactor upon the reaction yield and selectivities is studied both theoretically and experimentally. The study aims at the analysis of these influences in a series reaction such as the photochlorination of methane where methylene chloride and eventually chloroform are the most valuable products. The computational model employed has been verified for a group of selected conditions by means of bench-sale experiments.

It is found that the chlorine conversion shows the expected square root dependence with respect to the Local Volumetric Rate of Energy Absorption (LVREA). This dependence, in a first approximation, can also be assigned to the effect of the radiation source output power upon yield. It is also found that by manipulating the amount of radiation power fed to the reactor it is possible to ascertain the operating conditions favoring the production of predetermined intermediate products (e.g., methylene chloride or chloroform).

It is concluded that the use of customized lamps especially designed for each particular product on the basis of feasible changes in the characteristics of the existing radiation sources will favor a selective and more economical production of some of the stable intermediates, i.e., lamp design is an important feature in any optimal process design.     

Chemical composition and biological quality of defatted hazelnut flour

The results of the chemical composition and biological quality of deffated hazel nut flour are shown. The samples analyzed contained significant amounts of proteins (19%) comparable to legume flour, higher than cereals and lower than deffated oleaginous flours. The oil extracted from the seed was analyzed and the average results obtained were the following: Refraction index, 1.47; saponification No. 184.8; iodine No. 85.0. The average composition of the fatty acids obtained by gas liquid chromatography was: Palmitic acid 2.3% Palmitoleic acid 37.0% Stearic acid 0.5% Oleic acid 39.5% Linoleic acid 6.9% Linolenic acid 1.1% Eicosanoic acid 2.3% Eicosaenoic acid 4.6% Docosenoic acid 3.4% Tetraeicosanoic acid 0.3% These results indicate a good-quality oil due to the low content of linolenic acid. The nutritive value of the deffated meal measured in the rats gave a net protein ratio (NPR) of 3.58, lower than the corresponding casein value (4.10). The true protein digestibility measured in the rat gave a value of 7.3%, compared to 95% for casein. The amounts of iron and phosphorous are comparatively lower than those reported for rape-seed meal and sunflower meal.     

Single-phase gold/palladium catalyst: The nature of synergistic effect

The liquid phase oxidation of glycerol with oxygen has been studied using mono and bimetallic catalysts based on Au and Pd metals supported on activated carbon, in order to study the effect of the metal on the distribution of the products and on activity of catalysts. It was found that by using bimetallic catalysts (Au–Pd) a strong synergistic effect was shown. By using a preformed nucleating centre we were able to obtain a single alloyed phase, which allowed us to address the synergistic effect to the presence of alloyed Au/Pd. The advantage of using this latter catalyst lies not only in the high activity but also in a prolonged catalyst life. Although a partial leaching of palladium and assembling of the particles have been revealed by ICP and HRTEM respectively, activity after 10 re-cycles decreased less than expected (about 10%).     

Styrene-butadiene branched star-shaped asphalt modifiers: Synthesis and mechanical characterization

Abstract

The synthesis and the corresponding characterization of styrene-butadiene (SB), branched, star-shaped copolymers was investigated as part of a research project on asphalt modification using polymers with precise molecular structures. The method of anionic polymerization was followed to prepare samples of block copolymers of SB, a synthesis method that controls chain-architecture, molecular weight distribution, monomer distribution, and the average molecular weight. The research studies are the synthesis of block copolymers including linear, three- and four-arms constructs, depending on the coupling agent used. The techniques of nuclear magnetic resonance (1NMR), differential scanning calorimetry (DSC), gel permeation chromatography (GPC), and rheology were carried out to characterize the copolymers. From the results of the 1NMR, DSC, and GPC analyses, all star-shaped copolymers investigated showed a similar block copolymer composition. Furthermore, the rheological behavior of one of the synthesized star-shaped copolymers was nearly the same as a four-branched commercial copolymer. Rheologically, the four-arm block copolymer sample had the largest storage modulus (G′) among the branched copolymers synthetized, indicating that such architecture produces a highly structured material. In regard to polymer-modified asphalt formulations, the three-branched copolymer architecture yielded better elastic behavior than the four-branch version. In summary, the findings of this investigation provide new insight about a polymer system that may offer advantages in industrial asphalt paving applications.     

PMMA‐modified divinylester/styrene resins: Phase diagrams and morphologies

Binary and ternary experimental cloud‐point curves (CPCs) for systems formulated with a low molar mass synthesized divinylester (DVE) resin, styrene (St), and poly(methyl methacrylate) (PMMA) were determined. The CPCs results were analyzed with the Flory–Huggins (F‐H) thermodynamic model taking into account the polydispersity of the DVE and PMMA components, to calculate the different binary interaction parameters and their temperature dependences. The St‐DVE system is miscible in all the composition range and down to the crystallization temperature of the St; therefore, the interaction parameter expression reported for a higher molar mass DVE was adapted. The interaction parameters obtained were used to calculate the phase diagrams of the St‐PMMA and the DVE‐PMMA binary systems and that of the St‐DVE‐PMMA ternary system at three different temperatures. Quasiternary phase diagrams show liquid–liquid partial miscibility of the St‐PMMA and DVE‐PMMA pairs. At room temperature, the St‐DVE‐PMMA system is miscible at all compositions. Final morphologies of PMMA‐modified cured St‐DVE materials were generated by polymerization‐induced phase separation (PIPS) mechanism from initial homogeneous mixtures. SEM and TEM micrographs were obtained to analyze the generated final morphologies, which showed a direct correlation with the initial miscibility of the system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4539–4549, 2006     

Upgrading a Granular Computing Based Data Mining Framework to a Relational Case

One of the popular methods to develop an algorithm for mining data stored in a relational structure is to upgrade an existing attribute‐value algorithm to a relational case. Current approaches to this problem have some shortcomings such as (1) a dependence on the upgrading process of the algorithm to be extended, (2) complicated redefinitions of crucial notions (e.g., pattern generality, pattern refinement), and (3) a tolerant limitation of the search space for pattern discovery. In this paper, we propose and evaluate a general methodology for upgrading a data mining framework to a relational case. This methodology is defined in a granular computing environment. Thanks to our relational extension of a granular computing based data mining framework, the three above problems can be overcome.     

Vessel Inspection: A Micro-Aerial Vehicle-based Approach

Vessel maintenance entails periodic visual inspections of the internal and external parts of the hull in order to detect the typical defective situations affecting metallic structures, such as coating breakdown, corrosion, cracks, etc. The main goal of project MINOAS is the automation of the inspection process, currently undertaken by human surveyors, by means of a fleet of robotic agents. This paper overviews an approach to the inspection problem based on an autonomous Micro Aerial Vehicle (MAV) which, as part of this fleet, is in charge of regularly supplying images that can teleport the surveyor from a base station to the areas of the hull to be inspected. The control software approach adopted for the MAV is fully described, with a special emphasis on the self-localization capabilities of the vehicle. Experimental results showing the suitability of the platform to the application are as well reported and discussed.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Comparative study of the physical aging of the epoxy systems BADGE n = 0/m‐XDA and BADGE n = 0/m‐XDA/PEI

The physical aging of the epoxy network consisting of a diglycidyl ether of bisphenol A, m‐xylylenediamine, and polyetherimide was studied by differential scanning calorimetry. The glass transition temperature and the variation of the specific heat capacities have been calculated using the method, based on the intersection of both enthalpy–temperature lines for glassy and liquid states. The apparent activation energy (E_H) was calculated using a single method that involved separate temperature and excess enthalpy dependency. All calorimetric data were compared with those obtained for the epoxy network without thermoplastic. thermoplastic. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3931–3935, 2006