Spherical calcium phosphate nanoparticle fillers allow polymer processing of bone fixation devices with high bioactivity

Treatment of bone defects generally requires a fixation device. Biodegradable implants can often prevent second operations in contrast to metallic implants that are surgically removed after healing. In this study, we investigate the preparation of a bone fixation device with additional bioactivity by adding nanoparticulate amorphous tricalcium phosphate (ATCP) to improve bonding to bone. Medically approved poly(lactide‐co‐glycolide) (PLGA) and spherical (ATCP) nanoparticles were blended directly or through a two‐step approach, where ATCP was first dispersed in PLGA by solvent casting, extruded and hot pressed producing blocks and bone screws. The latter route yielded good particle dispersion while blending alone led to inhomogeneous mixtures. Samples were immersed in simulated body fluid and showed rapid formation of surface hydroxyapatite layers (examined by X‐ray diffraction and scanning electron microscopy) already after 3 days, thus confirming very high bioactivity. Polymer degradation during processing and upon simulated implantation conditions was followed by gel permeation chromatography. The elevated temperature during extrusion was the strongest single factor contributing to PLGA degradation. Screws could be machined out of extruded cylinders and demonstrated the ability to process PLGA/ATCP 90/10 composites with regular workshop tools. These properties suggest the use of such composites as improved, bioactive, and degradable bone fixation systems particularly in oral and maxillofacial surgery. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

夏普开发出新型立体显示触摸屏

Sharp Corporation has developed a 3D touchscreen LCD that can switch between 2D and 3D modes. Users can view 3D images without the need to wear glasses, making this LCD panel a likely candidate for mobile devices such as digital cameras, mobile phones, and smartphones. The new 3.4-inch panel has WVGA resolution (480×854 pixels), a contrast ratio of 1000: 1, and a brightness of 500 cd/m2, which Sharp says is the industry's highest brightness display for 3D LCD modules aimed at mass-produced mobile devices.     

Glass-Ceramic Tiles Prepared by Pressing and Sintering DC Plasma-Vitrified Air Pollution Control Residues

Air pollution control (APC) residues produced from cleaning gas emissions at energy from waste (EfW) plants processing municipal solid waste are a problematic hazardous waste. In this research they have been treated using DC plasma technology and this produces an inert glass. Glass-ceramic tiles were prepared by powder pressing and sintering fritted APC residue-derived glass. Tile samples prepared with high levels of plasma treated APC residue glass had comparable physical properties to commercially available ceramics such as porcelain and monoporosa, with high bulk density (2.4 g/cm³), low water absorption (<6%) and high flexural strength (∼60 MPa).     

Dynamics and control of solar thermochemical reactors

A general dynamic model for solar-driven thermochemical processes is formulated based on unsteady mass and energy conservation equations coupled to the reaction kinetics. It is applied to two pertinent high-temperature thermochemical reactors for fuel production that make use of concentrated solar energy as the source of process heat, namely: an indirectly irradiated batch-operated packed bed reactor for the carbothermic reduction of zinc oxide, and a directly irradiated continuously operated particle flow reactor for the steam-gasification of petcoke. Model parameter identification and validation is accomplished by comparing numerically simulated and experimentally measured temperatures and outlet product concentrations. A linear feedback controller was implemented using the LQG/LTR design method. Simulations of the controlled reactor system with real solar irradiation data indicates improved quality and steadiness of product composition throughout transient solar input phases and superior solar-to-chemical energy conversion efficiency.     

Toxaphene trends in the Great Lakes fish

As part of the U.S. Great Lakes Fish Monitoring and Surveillance Program (GLFMSP), more than 300 lake trout (Salvelinus namaycush) and walleye (Stizostedion vitreum vitreum) collected from the Laurentian Great Lakes each year from 2004 to 2009, have been analyzed for total toxaphene and eight selected congeners. The analytical results show fish toxaphene concentrations are quite different among lakes. Between 2004 and 2009, Lake Superior lake trout had the highest concentration (119 to 482 ng/g) and Lake Erie walleye had the lowest concentration (18 to 47 ng/g). Combining these results with the historical total toxaphene data (1977–2003), temporal changes were examined for each lake. Because of different analytical methods used in the previous studies, the historical data were adjusted using a factor of 0.56 based on a previous inter-method comparison in our laboratory. Trend analysis using an exponential decay regression showed that toxaphene in Great Lakes fish exhibited a significant decrease in all of the lakes with t_1/2 (confidence interval) of 0.9 (0.8–1.1) years for Lake Erie walleye, 3.8 (3.5–4.1) years for Lake Huron lake trout, 5.6 (5.1–6.1) years for Lake Michigan lake trout, 7.5 (6.7–8.4) years for Lake Ontario lake trout and 10.1 (8.2–13.2) years for Lake Superior lake trout. Parlars 26, 50 and 62 were the dominant toxaphene congeners accounting for 0.53% to 41.7% of the total toxaphene concentration. Concentrations of these congeners generally also decreased over time.     

Using electrophoretic deposition to identify protein charge in biological medium

Protein adsorption is the first step involved in establishing a suitable integration between a biomaterial and host tissue. It is therefore of highest interest to know the electric charge of proteins present in the relevant medium to be able to predict the behaviour of cells on given surfaces. In this study, electrophoretic deposition (EPD) was used as a simple method to identify the charge of proteins present in biological medium. In the model experiment carried out here, EPD was conducted using a biological medium containing 10% fetal calf serum (FCS) and the charge of the protein was determined by examining the migration of the protein in the EPD cell under a certain applied voltage. In addition, the suitability of EPD of proteins to deliver tailored surfaces for enhanced bioactivity or for controlled deposition of protein films on metallic surfaces was explored.     

The effect of the particle size and the morphology of alumina powders on the processing of green bodies by electrophoretic deposition

The electrophoretic deposition (EPD) method was investigated for the preparation of compacts from nanosized alumina powders. Ethanol suspensions of commercially available nanosized transition alumina and α-alumina powders were used. In addition, submicron powders were also considered for comparison. Besides the influence of operational pH change, the influence of the addition of three different surfactants – two branched polyethylene imines with molecular masses 1800 and 10,000, and citric acid—on the zeta-potential of the particles in ethanol and afterwards on the EPD was investigated.The packing density of the green parts prepared by the EPD of nanosized α-alumina powders at 30 V/cm was low (the green density was 27 vol. % of the theoretical density—TD), and a bimodal pore size distribution was observed. In contrast, the packing density in deposits made with the transition alumina nanopowder was much higher (the green density was 42 vol. % of the TD) and a monomodal distribution of pores was observed. In general, for all the deposits made from nanosized alumina powders, the particle-packing density was found to be lower than for those made from the submicron alumina powders (a green density equal to 59 vol. % of the TD).     

Computing Top-Beam Effects in Retaining Walls

This paper presents a method to compute the influence exerted by reinforced-concrete beams built on top of free or anchored, embedded retaining structures. A beam scheme and a two-dimensional wall scheme are solved iteratively until satisfying the compatibility conditions of horizontal displacement and rotation. The importance of accounting for top-beam effects is shown through a case study, which is also analyzed by the developed method.