Development of Formulations and Processes to Incorporate Wax Oleogels in Ice Cream

The objective of this study was to investigate the influence of emulsifiers, waxes, fat concentration, and processing conditions on the application of wax oleogel to replace solid fat content and create optimal fat structure in ice cream. Ice creams with 10% or 15% fat were formulated with rice bran wax (RBW), candelilla wax (CDW), or carnauba wax (CBW) oleogels, containing 10% wax and 90% high‐oleic sunflower oil. The ice creams were produced using batch or continuous freezing processes. Transmission electron microscopy (TEM) and cryo‐scanning electron microscopy were used to evaluate the microstructure of ice cream and the ultrastructure of oleogel droplets in ice cream mixes. Among the wax oleogels, RBW oleogel had the ability to form and sustain structure in 15% fat ice creams when glycerol monooleate (GMO) was used as the emulsifier. TEM images revealed that the high degree of fat structuring observed in GMO samples was associated with the RBW crystal morphology within the fat droplet, which was characterized by the growth of crystals at the outer edge of the droplet. Continuous freezing improved fat structuring compared to batch freezing. RBW oleogels established better structure compared to CDW or CBW oleogels. These results demonstrate that RBW oleogel has the potential to develop fat structure in ice cream in the presence of GMO and sufficiently high concentrations of oleogel.     

Role of the microbial population on the flavor of the soft-bodied cheese Torta del Casar

The purpose of this work was to investigate the influence of the spontaneous microbial population on the flavor of Torta del Casar cheese. A total of 16 batches of cheeses with different microbial qualities were used. Their physicochemical and microbial characteristics were evaluated during ripening and then related with the volatile compounds, taste, and flavor properties of the finished cheeses. Acids were the most abundant volatile compounds, followed by alcohols and carbonyls. The amount of acetic acid and several alcohols were linked to cheeses with higher counts of lactic acid bacteria (LAB), whereas Enterobacteriaceae counts were associated with semivolatile fatty acids. The gram-positive catalase-positive cocci counts were correlated with esters and methyl ketones. Although the role of the LAB in the flavor development of Torta del Casar is the most relevant, other microbial groups are necessary to impart the flavor of the cheese and to minimize the possible off-flavor derived from excessive concentrations of LAB metabolites, such as acetic acid.     

Taste perception and purchase intent of oil‐in‐water spreads: effects of oil types and salt (NaCl or KCl) concentrations

Associations of sodium intake with heart‐related problems are creating awareness towards reducing sodium. Potassium chloride (KCl), a substitute for sodium chloride (NaCl), has the disadvantage of imparting bitterness at high concentrations. We evaluated physical characteristics, taste perception and purchase intent of KCl and NaCl in oil‐in‐water spreads/emulsions composed by olive, rice bran and soya bean oils. Consumers (N = 300) evaluated saltiness/bitterness of emulsions prepared with 65% oil, and NaCl (0.5% and 1.0%) or KCl (0.75% and 1.5%). Olive oil spreads (104.07–107.43 Pa s) had higher viscosity compared to other spreads (59.16–74.96 Pa s). Type of oil had significant effects on bitterness, overall taste liking and viscosity. Taste liking decreased due to bitterness of olive oil spreads (mean drop=1.72–2.43). Purchase intent was positively associated with saltiness and pH and increased with oil claims (increase = 1.3%–22.1%) compared to sodium claims (increase = 0.0%–12.9%). These findings are useful for understanding taste perception of emulsions.     

Development of a novel device for applying uniform doses of electron beam irradiation on carcasses

The Maxim's Electron Scatter Chamber (Maxim Chamber) was developed to obtain uniform dose distribution when applying electron beam (e-beam) irradiation to materials of irregular surface. This was achieved by placing a stainless steel mesh surrounding a cylindrical area where the target sample was placed. Upon contact with the mesh, electrons scatter and are directed onto the target from multiple angles, eliminating the e-beam linearity and resulting in a uniform dose distribution over the target surface. The effect of irradiation in the Maxim Chamber on dose distribution and pathogen reduction was tested on rabbit carcasses to simulate other larger carcasses. The dose uniformity ratio (DUR) on the rabbit carcasses was 1.8, indicating an acceptable dose distribution. On inoculated carcasses, this treatment reduced Escherichia coli O157:H7 by > 5 log cycles. These results indicate that carcass irradiation using e-beam is feasible using the Maxim's electron scattering chamber. Appropriate adjustments will be further needed for commercial application on beef and other animal carcasses.     

Non-conventional high-pressure extraction process: A comparative study for astaxanthin recovery from Xanthophyllomyces dendrorhous

Xanthophyllomyces dendrorhous is one of the most attractive natural sources of astaxanthin. The yeast produces the compound intracellularly, therefore, it is necessary to evaluate cell rupture methods using clean and efficient technologies for its extraction and it subsequent use in industries. At present work, two non-conventional high-pressure extraction methods were evaluated for astaxanthin recovery: Supercritical fluid extraction and microfluidisation. Results: Effect of pressure (15, 30, and 45 Megapascals; MPa), Temperature (313 and 343 °K) and usage of co-solvent were studied in supercritical extraction process, meanwhile the effect of microfluidisation process (five stages and 160 MPa) for cell rupture and its combination with conventional technics (lithic enzymes, glass beads and ultrasonication) for the recovery of astaxanthin were evaluated. Supercritical fluid extraction presented a higher astaxanthin recovery, 54% yield extraction, at 32.5 MPa and 313 °K, and using ethanol as co-solvent, compared to a 31% yield extraction by mean microfluidisation process at 160 MPa combined with 15 min of sonication (amplitude of 80%).     

Extracts of Mexican Oregano (<Emphasis Type="Italic">Lippia berlandieri</Emphasis> Schauer) with Antioxidant and Antimicrobial Activity

Antimicrobial activity of fractions obtained from Mexican oregano (Lippia berlandieri Schauer) chloroform extract was tested by growth inhibition against Escherichia coli, Staphylococcus aureus and Bacillus cereus, and antioxidant capacity was tested by inhibition of linoleic acid oxidation. Fractions were obtained by differences in polarity or structure (phenolic and non-phenolic fraction). Gram-positive organisms were more susceptible to Mexican oregano extracts. Fraction 3 (by polarity) and phenolic fractions I, II, III, IV and V were the extracts with higher antimicrobial activity. The non-phenolic fraction had effect against B. cereus. Polarity fraction 5 and phenolic Fraction II had a high antioxidant capacity; a 0.08% concentration of fraction 5 had a similar effect as butylated hydroxytoluene at 0.01% concentration. Fractions of Mexican oregano with different polarity and functional groups had antioxidant and antimicrobial activity and can be used in a variety of applications.     

Identifying key structural indicators of mechanical strength in networks of fat crystals

The mechanical properties of edible fats can be influenced by a series of factors, including the amount of solids, the polymorphism of the solid-state, as well as the microstructure of networks of polycrystalline particles created upon crystallization. This work demonstrates that for binary mixtures of the high-melting fraction of milk fat (HMF) with cocoa butter as well as for mixtures of HMF with the middle-melting fraction of milk fat, changes in the storage shear modulus (G′) are mostly controlled by the solid fat content (SFC), and the material’s microstructure. The SFC, in turn is a function of the phase behavior of the mixtures in the solid state. Experimental techniques used in the characterization of the different levels of structure are presented in this work. A model developed to explain mechanical properties of these materials taking into account all levels of structure is proposed. The polymorphism of the solid state did not seem to influence the mechanical properties of the fats, indicative of this material being structured as a network of weakly-attractive polycrystalline particles. Moreover, the mass fractal dimension of the network was closely related to the polymorphism of the solid state.