Phase and Rheological Behavior of Cetyldimethylbenzylammonium Salicylate (CDBAS) and Water

The temperature–composition phase diagram in the diluted region of the cationic surfactant cetyldimethylbenzylammonium salicylate/water system was studied with a battery of techniques. The Krafft temperature (T _k = 33 ± 1 °C) was measured by differential scanning calorimetry, polarizing microscopy, conductimetry, viscosimetry, and rheometry. The critical vesicle concentration (cvc, ~0.002 wt%) and a vesicle–micellar transition (cvm, ~0.005 wt%) was detected at a temperature of 35 °C. Below T _k and concentrations ≤2 wt%, a transparent solution is formed (I). Above 2–8.5 wt%, a lamellar (L₁) phase forms. At higher concentrations and up to 12 wt%, a second lamellar phase (L₂) is detected. From 12.4 to 15.5 wt%, an emulsion phase (E) is formed. Rheological dynamic measurements for the I phase indicate that the system exhibits a predominantly viscous behavior (G′ < G″) for concentrations lower than the overlap or entanglement concentration (C _e, ~0.75 wt%). At higher concentrations, wormlike micelles form and the elastic behavior predominates (G′ > G″). The elastic (G′) modulus collapses in a concentration–time master curve in the whole reduced frequencies range ωτ _c examined, whereas the viscous modulus (G″) collapses only at reduced frequencies lower than 0.1. Reduced stress plotted as a function of the reduced shear rate yields a good superposition of the curves at the different concentrations up to the onset of the non-linear behavior.     

Human critical success factors for kaizen and its impacts in industrial performance

This article presents the results of a survey with 13 main activities related to human factors that are executed during kaizen implementation process and were integrated in four independent latent variables (management commitment, education, communication and motivation) that are associated to 14 benefits obtained after its implementation that were grouped in three dependent latent variables (process, workers and customers). The survey was applied to persons with responsibilities in continuous improvement programs and projects in companies located in Mexico. Independent and dependent variables were integrated in a structural equation model that was evaluated using partial least squares algorithms WarpPLS® for finding causal relations among them. Results indicate that management commitment and education are the main factors that guarantee the success for kaizen implementation programs, but that is moderated by a good communication for having good operational process performance for better workers and customer satisfaction.     

Polyacrylamide-gelatin polymeric networks: effect of pH and gelatin concentration on the swelling kinetics and mechanical properties

This work presents the synthesis of polyacrylamide-gelatin (PAM-G) semi-interpenetrating hydrogels, as well as the study of the swelling capacity of this material at different pH’s, and we report its Young modulus. The hydrogels were crosslinked with N,N′-methylenebisacrylamide and synthesized at different acrylamide/gelatin weight relationship. It was observed that the swelling capacity of the hydrogels increases when the gelatin concentration is increased; while the Young modulus (at the swelling equilibrium) decreases lightly. Therefore, the gelatin has a small effect in the Young modulus, unlike its influence in the swelling ability. The swelling experiments reveal that the PAM-G hydrogels increase its swelling capacity in alkaline mediums because the presence of the hydrophobic functional groups (mainly COO⁻) in the gelatin structure.     

Numerical model of a planar jet wiping system for continuous strip lines

Journal of Mechanical Science and Technology - The present study focuses on the numerical modelling of gas-jet wiping process. Many processes involving liquids are necessary during steel...     

A Public Library for Matteson,Illinois

This project for the Matteson Public Library was developed through the utilization of three architectural language elements that defined the varied spaces required by the competition program: a large, light roof floating over the building, a system of brass columns defining a rhythmically punctuated space, and a non-structural wall creating the outer skin of the building. The poetically inflected relationship between these three elements articulates and defines the spaces of the library, generating high spatial tension at the corner of the site. As expected, the Community Meeting Room occupies this prominent urban position.     

Hydrolytic degradation of nanocomposites based on poly(l‐lactic acid) and layered double hydroxides modified with a model drug

Hydrolytic degradation of a nanocomposite of poly(L‐lactic acid), PLA, and a layered double hydroxide (LDH) modified with the drug 4‐biphenyl acetic acid (Bph) has been studied. PLA/LDH‐Bph nanocomposite was prepared by solvent casting with 5 wt % of drug modified LDH and the hydrolytic degradation was carried out in a PBS solution at pH 7.2 and 37 °C. Neat PLA with 5 wt % 4‐biphenyl acetic acid was studied as reference material (PLA/Bph). The materials were studied by WAXS, TEM, TGA, DSC, SEM, FTIR, SEC and contact angle measurements. For PLA/Bph, an acid catalytic effect, caused by the drug, accelerates PLA mass loss. However, for PLA/LDH‐Bph, the presence of LDH produces a barrier effect that initially reduces the diffusion of the oligomers produced during hydrolytic degradation. DSC results demonstrate that Bph induces faster PLA crystallization and this effect is reduced in PLA/LDH‐Bph nanocomposites because of their lower drug content. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43648.     

Theoretical and empirical assessment of evaluation methods of the electric charge transference in welding with covered electrodes

The present work is based on an assessment of experimentally obtained results from the application of different methods of evaluation, reported in the specialised literature, of the electrical charge transference stability in the arc. A simple factorial design, taking the welding current as independent variable, was applied to the process with an AWS A5.1 E6013 electrode. The welds were carried out in the flat position by a gravity device. It was possible to obtain criteria to classify the electrical charge transference stability of the process by digital signal processing and a statistical technique. The outcome was based on visual inspection and morphologic studies. It was concluded that amongst the considered parameters, the average value of the arc conductivity during reignition peaks and the quantity of reignition peaks are the more representative indices, both from statistics and from phenomenological points of view. This finding is validated by the fact that the bead morphology and the stability analysis of the electrical charge transference process coincides with the fact that the 160 A (for 4 mm-diameter electrodes) is the most stable regime.     

Novel Redox-Dependent Esterase Activity (EC 3.1.1.2) for DJ-1: Implications for Parkinson’s Disease

Mutations the in human DJ-1 (hDJ-1) gene are associated with early-onset autosomal recessive forms of Parkinson’s disease (PD). hDJ-1/parkinsonism associated deglycase (PARK7) is a cytoprotective multi-functional protein that contains a conserved cysteine-protease domain. Given that cysteine-proteases can act on both amide and ester substrates, we surmised that hDJ-1 possessed cysteine-mediated esterase activity. To test this hypothesis, hDJ-1 was overexpressed, purified and tested for activity towards 4-nitrophenyl acetate (pNPA) as µmol of pNPA hydrolyzed/min/mg·protein (U/mg protein). hDJ-1 showed maximum reaction velocity esterase activity (V_max = 235.10 ± 12.00 U/mg protein), with a sigmoidal fit (S_0.5 = 0.55 ± 0.040 mM) and apparent positive cooperativity (Hill coefficient of 2.05 ± 0.28). A PD-associated mutant of DJ-1 (M26I) lacked activity. Unlike its protease activity which is inactivated by reactive oxygen species (ROS), esterase activity of hDJ-1 is enhanced upon exposure to low concentrations of hydrogen peroxide (<10 µM) and plateaus at elevated concentrations (>100 µM) suggesting that its activity is resistant to oxidative stress. Esterase activity of DJ-1 requires oxidation of catalytic cysteines, as chemically protecting cysteines blocked its activity whereas an oxido-mimetic mutant of DJ-1 (C106D) exhibited robust esterase activity. Molecular docking studies suggest that C106 and L126 within its catalytic site interact with esterase substrates. Overall, our data show that hDJ-1 contains intrinsic redox-sensitive esterase activity that is abolished in a PD-associated mutant form of the hDJ-1 protein.