Physical Properties of Chocolate with Addition of Cocoa Butter Equivalent of Moderate Hardness

In this study, the fat phase of chocolate samples which contained cocoa butter from Ghana and cocoa butter equivalent (CBE) of moderate hardness was analyzed. Physical properties and shelf life of chocolate depend on the fat phase behavior as well as the amount and composition of added CBE. The laboratory-made chocolate samples were tempered at three different pre-crystallization temperatures (25, 27 and 29 °C), with three different concentrations of CBE, amounting to 3, 5 and 7 %, calculated on chocolate. The color and other physical attributes of chocolate samples were investigated by the following analytical methods: thermoreographic measurement, solid fat content (SFC) of chocolate, Blooming test (thermo-cycle test 32/20 °C) and color measurement. It was found that using CBE of moderate hardness did not change the melting properties of chocolate in relation to the investigated cocoa butter from Ghana (of moderate hardness). It was found that all three applied temperatures of pre-crystallization are optimum for the chocolate mass with the addition of the investigated CBE under the given measurement conditions. At all these temperatures, the chocolate had excellent fat bloom resistance.     

Effect of organic load on phosphorus and bacteria removal from wastewater using alkaline filter materials

The organic matter released from septic tanks can disturb the subsequent step in on-site wastewater treatment such as the innovative filters for phosphorus removal. This study investigated the effect of organic load on phosphorus (P) and bacteria removal by reactive filter materials under real-life treatment conditions. Two long-term column experiments were conducted at very short hydraulic residence times (average ∼5.5 h), using wastewater with high (mean ∼120 mg L⁻¹) and low (mean ∼20 mg L⁻¹) BOD₇ values. Two alkaline filter materials, the calcium-silicate material Polonite and blast furnace slag (BFS), were tested for the removal capacity of total P, total organic carbon (TOC) and Enterococci. Both experiments showed that Polonite removed P significantly (p < 0.01) better than BFS. An increase in P removal efficiency of 29.3% was observed for the Polonite filter at the lower concentration of BOD₇ (p < 0.05). Polonite was also better than BFS with regard to removal of TOC, but there were no significant differences between the two filter materials with regard to removal of Enterococci. The reduction in Enterococci was greater in the experiment using wastewater with high BOD₇, an effect attributable to the higher concentration of bacteria in that wastewater. Overall, the results demonstrate the importance of extensive pre-treatment of wastewater to achieve good phosphorus removal in reactive bed filters and prolonged filter life.     

Toxicity of Metal Oxide Nanoparticles: Mechanisms,Characterization, and Avoiding Experimental Artefacts

Metal oxide nanomaterials are widely used in practical applications and represent a class of nanomaterials with the highest global annual production. Many of those, such as TiO₂ and ZnO, are generally considered non‐toxic due to the lack of toxicity of the bulk material. However, these materials typically exhibit toxicity to bacteria and fungi, and there have been emerging concerns about their ecotoxicity effects. The understanding of the toxicity mechanisms is incomplete, with different studies often reporting contradictory results. The relationship between the material properties and toxicity appears to be complex and diifficult to understand, which is partly due to incomplete characterization of the nanomaterial, and possibly due to experimental artefacts in the characterization of the nanomaterial and/or its interactions with living organisms. This review discusses the comprehensive characterization of metal oxide nanomaterials and the mechanisms of their toxicity.     

Solid-State 13C CP/MAS NMR for Alkyl-O-Aryl Bond Determination in Lignin Preparations

Several lignin preparations (Freudenberg lignin, Björkman lignin, and Pepper lignin), technical lignins (soda, soda-AQ, Kraft, Kraft-AQ, and hydrolysis), dimeric lignin model compounds, and different polysaccharides (galactoglucomannan, arabinogalactan, xylan, and arabinan) were analyzed by means of solid-state ¹³C CP/MAS NMR. Signals assignment in solid-state NMR lignin spectra was performed on the basis of the conducted studies and earlier published data. It was established that there exists strong linear correlation (r = 0.985) between Alkyl-O-Aryl inter-unit bond content in lignin and integral signals intensity in NMR spectra in the range of chemical shifts of 96–68 ppm. The integral signals intensity was measured in correlation with the reference integral signals in the range of chemical shifts of 162–102 ppm, typical for aromatic carbon atoms. To eliminate the effect, caused by carbohydrates contained in lignin, the correction factor of 0.67% of the area of integration per 1% of carbohydrates was determined. It was shown that the solid-state ¹³C CP/MAS NMR method allowed to determine Alkyl-O-Aryl bond content in both soluble and insoluble lignin preparations, and also to determine methoxyl groups content in soluble preparations.     

An approach to evaluate large-scale ICT training interventions

Despite advances in the quality and availability of information and communication technologies (ICT), the level of access and skill in using these resources remains unequal. This is particularly evident in developing countries. To reduce the gap between these levels of ICT use, organizations (both public and private) invest in the expansion of infrastructure by providing ICT access and ICT training. In this study, we demonstrate that there is a gap in current approaches to monitor and evaluate large-scale ICT training interventions. Thus, we propose an approach based on social network analysis and data mining techniques, and apply it to an online training program conducted in different regions of Brazil. The results allow us to examine different aspects of the program, such as the region of participants, the institutions driving the intervention, local indicators of telecommunications infrastructure, and local socioeconomic conditions.     

Electrochemical and XPS studies of the passive film formed on stainless steels in borate buffer and chloride solutions

The passivity of AISI 304L and AISI 316L stainless steels in a borate buffer solution, with and without the addition of chloride ions, was studied using cyclic voltammetry and potentiodynamic measurements. The passive layers formed by electrochemical oxidation at different passivation potentials on both the stainless steels were studied by X-ray photoelectron spectroscopy, their compositions were analysed as a function of depth, and the cationic fraction of the passive film was determined. The passive films established on the two stainless steels in the borate buffer solution at pH = 9.3 contained the oxides of two main elements, i.e., Fe and Cr. The oxides of the alloying elements Ni and, optionally, Mo, also contribute to the passive layer. In the presence of chloride ions a strong chromium enrichment was observed in the passive layers.     

Bioactive layers based on black glasses on titanium substrates

Black glasses are amorphous materials based on silicon oxycarbide. The use of precursors in the form of ladder‐like silsesquioxanes enables the control of the amount of carbon ions in the glass network by adjusting ratios of T to D structural units in precursors. In this study, four different sols precursors of four different layers of black glasses on titanium substrates were prepared. The materials were analyzed with the use of various spectroscopic and microscopic methods. Formation of continuous and hermetic layers resistant to corrosion was proven. The black glasses layers were examined as materials for biomedical applications. Therefore, preliminary tests of their bioactivity and biocompatibility were performed. The best results were obtained for the material of lower contribution of carbon ions.     

Chemical Profile of Satureja Kitaibelii Wierzb. ex Heuff. Essential Oils: Composition of Satureja Kitaibelii Essential Oils

The essential oils from dried aerial parts of Satureja kitaibelii Wierzb. ex Heuff., collected at three various sites in Serbia, were analyzed by gas chromatography and gas chromatography/mass spectrometry. One hundred sixty-three components were identified in all investigated samples, 132 components in the oil from the site Devoja?ki grob, 124 components in the oil coming from Si?eva?ka klisura site, and 146 components in the oil from the site Viso?ka R?ana, accounting 97.3, 93.9, and 95.6% of the total oils, respectively. The most abundant component in the essential oils was geraniol amounting from 24.0 to 30.3%, making up about one-quarter of the total oils. Other representative compounds were identified as linalool (5.0–14.8%), limonene (4.3–7.9%), and caryophyllene oxide (4.4–5.2%) in all tested samples. The results suggested that essential oils of S. kitaibelii belong to the aliphatic monoterpene chemotype.