Subcritical (hot/liquid) water dechlorination of PCBs (Aroclor 1254) with metal additives and in waste paint

No disposal option exists for "mixed wastes" such as paint scrapings that are co-contaminated with polychlorinated biphenyls (PCBs) and radioactive metals. Either removal or destruction of the PCBs is required prior to disposal. Comparison of subcritical water dechlorination (350 degrees C, 1 h) of Aroclor 1254 in paint scrapings (180 ppm) and of standard Aroclor 1254 showed significantly enhanced dechlorination in the presence of paint. While no significant degradation was observed for standard Aroclor (no paint), the dechlorination of PCBs in paint was 99, 99, and 80% for the hepta-, hexa-, and pentachlorinated congeners, respectively, indicating that metals in the paint enhanced the dechlorination reactions. Adding metals to the standard Aroclor (no paint) reactions enhanced PCB dechlorination in subcritical water in descending order of activity: Pb approximately = Cu > Al > Zn > Fe. In the presence of both zerovalent and divalent lead and zerovalent copper in subcritical water (350 degrees C, 1 h), 99% of the Aroclor 1254 mixture (tetra- to heptachlorinated biphenyls) was dechlorinated. High dechlorination (ca. 95%) was also achieved with zerovalent aluminum. In contrast to other metals, lead retained its degradation ability at a lower temperature of 250 degrees C after 18 h. The high degradation efficiency achieved using metal additives in water at reasonable temperatures and pressures demonstrates the potential for subcritical water dechlorination of PCBs in paint scrapings and, potentially, in other solid and liquid wastes.     

Evaluation of antioxidant activity and total phenolics of selected Czech honeys

Honey serves as a good source of natural antioxidants, which are effective in reducing the risk occurrence of heart disease, cancer, cataracts, different inflammatory processes and immune-system decline. In the fresh selected Czech honey samples originated mainly from the region North Moravia antioxidant activity and total polyphenol content were determined. A total of 40 honey samples (multifloral, lime, rape, raspberry, mixture and honeydew honeys) native to different stations gained in the period from May by August year 2006 were analysed. Total phenolics (TP) content was determined by the modified Folin-Ciocalteau method [TP was expressed as mg of gallic acid equivalent (GA eq.) per kg of honey]. For evaluation of the antioxidant activity (AOA) three different methods were used, the ferric reducing antioxidant power (FRAP) assay, the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay and the 2,2′-azinobis(3-ethylbenzothiazolin)-6-sulfphonate (ABTS) assay. AOA was expressed in mg ascorbic acid equivalent (AA eq.) per kg of honey. The results indicated that TP and AOA in Czech honey varied greatly between the honey kinds, location and time of the harvest. Average TP ranged from 89.9 mg GA eq. kg^-1 in lime honey to 215.2 mg GA eq. kg⁻¹ in honeydew honey. Antioxidant activity determined by the DPPH, ABTS and FRAP methods was lowest in floral honeys. The highest values were obtained for honeydew and mixture honeys. ABTS and FRAP assays have been shown to be the optimal methods for AOA determination in honey. A positive linear correlation between AOA and TP was observed (in FRAP assay R² = 0.852). It indicates that phenolics are one of the main components responsible for antioxidant behaviour of honey. The obtained results support and extend complete knowledge about the content of bioactive phenolics and antioxidant activity in the Czech honeys.     

Tocols of selected spring wheat (Triticum aestivum L.), einkorn wheat (Triticum monococcum L.) and wild emmer (Triticum dicoccum Schuebl [Schrank]) varieties

Wheat contributes significantly worldwide to antioxidant income with beneficial healthy effects. Two varieties of einkorn wheat (Triticum monococcum L. – Escana and Schwedisches Einkorn), two varieties of wild emmer [Triticum dicoccum Schuebl (Schrank)] (Rudico and Kahler Emmer) and three varieties of spring wheat (Triticum aestivum L. – Granny, Kärtner Früher and SW Kadrilj) were evaluated for tocols – tocopherols and tocotrienols by high performance liquid chromatography – electrospray ionisation tandem mass spectrometry (HPLC–ESI/MS/MS). Investigated emmer and einkorn wheat varieties have shown minor lower total tocols content in comparison with spring varieties, however significant typical levels of tocopherols and tocotrienols were found in these groups. In einkorn wheat varieties the major abundance of total tocols is represented by tocotrienols (Schwedisches Einkorn 65.0%, Escana 54.9%), in emmer wheat varieties the abundance of tocotrienols and tocopherols were similar (Rudico 48.9% of tocotrienols, Kahler Emmer 47.6%), whereas in spring bread wheat higher tocopherols (SW Kadrilj 54.5%, Kärtner Früher 60.2%, Granny 55.0%) were recorded.     

New design of low power, 100 Mb-s IR-UWB pulse generator in 0.18 µm CMOS technology

A new method of impulse radio ultra-wideband (IR-UWB) pulse generation, with advantage of providing a “notch” like representation of pulse in the spectrum domain for particular control parameters values, is investigated in this paper. Low power pulse generator is composed of a glitch generator, a switched oscillator, a two-stage buffer and a pulse shaping filter. The proposed architecture, designed in UMC 0.18 µm CMOS technology, can operate in a single band from 3.3 GHz to 9.3 GHz or in a double, lower and higher UWB band (from 3 GHz to 9.15 GHz), suppressing frequencies in the WLAN band. Both spectrums fully comply with the corresponding FCC spectral mask, while the pulse generator regime and the spectrum range are determined by control signal values. Post-layout simulation results showed a pulse width of 0.5 ns, and a peak-to-peak amplitude of 211 mV for one band spectrum. The average power consumption is 0.89 mW corresponding to the energy consumption of 8.9 pJ/pulse for 100 MHz pulse repetition rate (PRF). The pulse duration is 1 ns and peak-to-peak amplitude is 202 mV in the case of the WLAN frequency band suppression. The total chip area is 0.31 mm². The pulse generator has been evaluated for the best performance supporting the on-off keying (OOK) modulation.     

Robust stability conditions for polytopic systems

The paper provides a survey of some recent robust stability conditions, their mutual comparisons, and presents new robust stability conditions for continuous- and discrete-time systems with convex polytopic uncertainty. Robust stability analysis is based on LMI conditions and parameter-dependent Lyapunov functions. The developed stability conditions are appropriate for output feedback design. Numerical examples thoroughly illustrate the power of the considered robust stability analysis methods and show which of them provides the less conservative results.     

A Survey of Programming Language Memory Models

Programming and Computer Software - A memory model defines the semantics of concurrent programs operating on a shared memory. The most well-known and intuitive memory model, sequential...     

Negative terahertz conductivity of graphene when pumping by optical plasmons

The diffusion pumping of graphene by optical plasmons, propagating in metal, and separated from the graphene by a semiconductor layer has been investigated theoretically. It is shown that pumping of graphene with optical plasmons provides maximum negative terahertz conductivity of graphene at a lower (approximately by 25%) pumping power compared to a diffusion pumping of graphene with optical radiation.     

Internationale Klausurwoche: „Neue ethische Herausforderungen in der datenreichen Forschungsmedizin: ein Ländervergleich“

Ethik in der Medizin -     

Assessment of fly ash-aided phytostabilisation of highly contaminated soils after an 8-year field trial: part 1. Influence on soil parameters and metal extractability

Sustainable management of large surface areas contaminated with trace elements is a real challenge, since currently applied remediation techniques are too expensive for these areas. Aided phytostabilisation appears to be a cost efficient technique to reduce metal mobility in contaminated soils and contaminated particle spread. In this context, this study aimed at evaluating the long-term efficiency of aided phytostabilisation on former agricultural soils highly contaminated with trace elements. The influence of afforestation and fly ash amendments to reduce metal mobility was investigated. Before being planted with a tree mix, the study site was divided into three plots: a reference plot with no amendment, the second amended with silico-aluminous fly ash and the third with sulfo-calcic fly ash. After eight years, some soil physico-chemical parameters, including cadmium (Cd), lead (Pb) and zinc (Zn) extractability were modified. In particular, pH decreased on the whole site while organic carbon content increased. The alteration of these parameters influencing trace element mobility is explained by afforestation. Over time, concentrations of CaCl₂-extractable metals increased and were correlated with the soil pH decrease. In the amended soils, extractable Cd, Pb and Zn concentrations were lower than in the reference soil. The results indicated that the two fly ashes buffered natural soil acidification due to vegetation development and limited trace element mobility and thus could limit their bioavailability. For long-term phytostabilisation, special attention should be focused on the soil pH, metal mobility and phytoavailability analysis.     

Gel permeation chromatography of poly(dimethyl siloxane). I. The universal calibration

The Benoit universal calibration method has been tested for evaluation of GPC data of polydimethylsiloxane (PDMS) in toluene at 60°C. For the conversion of the calibration curve for polystyrene to the PDMS calibration curve, the Mark–Houwink equation for PDMS in toluene at 60°C was derived: [η] = 9.77 × 10^?5 M^0.725. The applicability of this universal calibration was proved by the experimental results on five PDMS model samples. For the correct evaluation of the PDMS elution curve, the use of the true calibration is inevitable, because the hydrodynamic volume of PDMS molecular weight unit is somewhat different from the polystyrene one.