Characterization of transient currents in HfO2 capacitors in the short timescale

We present a detailed experimental investigation of transient currents in HfO₂ capacitors in the short timescale. We show that the transient currents flowing through the capacitor plates when the gate voltage is reset to zero after a low voltage stress period follow a power-law time dependence t^−α (with α ? 1) over more than eight decades of time and down to the μs timescale. As transient currents in HfO₂ are largely increased with respect to the SiO₂ case, these results confirm that transient effects can be a severe issue for the successful integration of high-k dielectrics.     

Flexible,Low-loss Waveguide Designs for Efficient Coupling to Quantum Cascade Lasers in the Far-infrared

We coupled linearly polarized and azimuthally polarized Terahertz quantum cascade lasers (QCLs) to the low-loss optical modes of hollow core waveguides having a sequence of different metallic or dielectric inner coatings. The latter waveguides have been specifically designed to force the propagation of a dominant optical mode once the thickness (d) of the inner dielectric coating is properly chosen. Our results demonstrate that both the TE01 and the TE11 modes can be easily converted to a hybrid one when d > 6 μm allowing the propagation of THz QCL beams with transmission losses as low as 1.5 dB/m, bending losses < 1.1 dB and reasonably high coupling efficiencies (87%).     

High‐capacity resource sharing schemes for broadband wireless networks

The unique capabilities of new cellular systems are expected to provide users with integrated multimedia services. Since the air interface still represents the system bottleneck, this paper proposes novel scheduling techniques to integrate efficiently the support of real‐time traffic (i.e. voice and video) and data bursty traffic under quality of service (QoS) guarantees. Prioritization among traffic classes is adopted and a polling service discipline is employed within a class, where the permission rights of each traffic source are determined on the basis of token bucket regulators. Two polling‐based approaches are compared to serve the sources of a class: (i) when a source is enabled to transmit, a burst of packets is sent at once; (ii) within the time interval destined to a traffic class, a cyclic service of the sources is allowed on a packet basis. With realistic assumptions on both radio channel conditions and protocol signaling overhead, this paper compares these two different approaches and the dynamic slot assignment++ (DSA++) scheme appeared in the literature. The obtained results highlight that our second scheme (case ii) allows increasing the number of supported video traffic sources of many units with respect to DSA++. Finally, an analytical approach has been proposed for our second polling scheme. Copyright © 2004 John Wiley & Sons, Ltd.     

Comparative analysis of the outdoor performance of a dye solar cell mini‐panel for building integrated photovoltaics applications

New generation photovoltaic (PV) devices such as polymer and dye sensitized solar cells (DSC) have now reached a more mature stage of development, and among their various applications, building integrated PVs seems to have the most promising future, especially for DSC devices. This new generation technology has attracted an increasing interest because of its low cost due to the use of cheap printable materials and simple manufacturing techniques, easy production, and relatively high efficiency. As for the more consolidated PV technologies, DSCs need to be tested in real operating conditions and their performance compared with other PV technologies to put into evidence the real potential. This work presents the results of a 3 months outdoor monitoring activity performed on a DSC mini‐panel made by the Dyepower Consortium, positioned on a south oriented vertical plane together with a double junction amorphous silicon (a‐Si) device and a multi‐crystalline silicon (m‐Si) device at the ESTER station of the University of Rome Tor Vergata. Good performance of the DSC mini‐panel has been observed for this particular configuration, where the DSC energy production compares favorably with that of a‐Si and m‐Si especially at high solar angles of incidence confirming the suitability of this technology for the integration into building facades. This assumption is confirmed by the energy produced per nominal watt‐peak for the duration of the measurement campaign by the DSC that is 12% higher than that by a‐Si and only 3% lower than that by m‐Si for these operating conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Performance Analysis of Arbitration Policies for SoC Communication Architectures

As technology scales toward deep submicron, the integration of a large number of IP blocks on the same silicon die is becoming technically feasible, thus enabling large-scale parallel computations, such as those required for multimedia workloads. The communication architecture is becoming the bottleneck for these multiprocessor Systems-on-Chip (SoC), and efficient contention resolution schemes for managing simultaneous access requests to the shared communication resources are required to prevent system performance degradation. The contribution of this work is to analyze the impact on multiprocessor SoC performance of different bus arbitration policies under different communication patterns, showing the distinctive features of each policy and the strong correlation of their effectiveness with the communication requirements of the applications. Beyond traditional arbitration schemes such as round robin and TDMA, another policy is considered that periodically allocates a temporal slot for contention-free bus utilization to a processor which needs fixed predictable bandwidth for the correct execution of its time-critical task. The results are derived on a complete and scalable multiprocessor SoC simulation platform based on SystemC, whose software support includes a complete embedded multiprocessor OS (RTEMS). The communication architecture is AMBA compliant, and we exploit the flexibility of this multi-master commercial standard, which does not specify the arbitration algorithm, to implement the explored contention resolution schemes.     

Engineering DNA-Grafted Quatsomes as Stable Nucleic Acid-Responsive Fluorescent Nanovesicles

The development of artificial vesicles into responsive architectures capable of sensing the biological environment and simultaneously signaling the presence of a specific target molecule is a key challenge in a range of biomedical applications from drug delivery to diagnostic tools. Herein, the rational design of biomimetic DNA-grafted quatsome (QS) nanovesicles capable of translating the binding of a target molecule to amphiphilic DNA probes into an optical output is presented. QSs are synthetic lipid-based nanovesicles able to confine multiple organic dyes at the nanoscale, resulting in ultra-bright soft materials with attractiveness for sensing applications. Dye-loaded QS nanovesicles of different composition and surface charge are grafted with fluorescent amphiphilic nucleic acid-based probes to produce programmable FRET-active nanovesicles that operate as highly sensitive signal transducers. The photophysical properties of the DNA-grafted nanovesicles are characterized and the highly selective, ratiometric detection of clinically relevant microRNAs with sensitivity in the low nanomolar range are demonstrated. The potential applications of responsive QS nanovesicles for biosensing applications but also as functional nanodevices for targeted biomedical applications is envisaged.     

A highly efficient receiver for satellite‐based automatic identification system signal detection

An innovative receiver architecture for the satellite‐based automatic identification system has been recently proposed. In this paper, we describe a few modifications that can be introduced on the algorithms for synchronization and detection, which provide an impressive performance improvement. The receiver architecture has been designed for an on‐board implementation, and a prototype has been implemented by the University of Parma and CGS S.p.A. Compagnia Generale per lo Spazio under the European Space Agency project FENICE (Flexible innovative AIS receiver prototype). A few modifications are also here described that could allow a further performance improvement in case of processing moved to ground‐based stations, based on a priori information there available. Copyright © 2014 John Wiley & Sons, Ltd.     

LTE‐based satellite communications in LEO mega‐constellations

The integration of satellite and terrestrial networks is a promising solution for extending broadband coverage to areas not connected to a terrestrial infrastructure, as also demonstrated by recent commercial and standardisation endeavours. However, the large delays and Doppler shifts over the satellite channel pose severe technical challenges to traditional terrestrial systems, as long‐term evolution (LTE) or 5G. In this paper, 2 architectures are proposed for a low Earth orbit mega‐constellation realising a satellite‐enabled LTE system, in which the on‐ground LTE entity is either an eNB (Sat‐eNB) or a relay node (Sat‐RN). The impact of satellite channel impairments as large delays and Doppler shifts on LTE PHY/MAC procedures is discussed and assessed. The proposed analysis shows that, while carrier spacings, random access and RN attach procedures do not pose specific issues and hybrid automatic repeat request requires substantial modifications. Moreover, advanced handover procedures will be also required due to the satellites' movement.     

Pressure‐Tunable Ambipolar Conduction and Hysteresis in Thin Palladium Diselenide Field Effect Transistors

Few‐layer palladium diselenide (PdSe₂) field effect transistors are studied under external stimuli such as electrical and optical fields, electron irradiation, and gas pressure. The ambipolar conduction and hysteresis are observed in the transfer curves of the as‐exfoliated and unprotected PdSe₂ material. The ambipolar conduction and its hysteretic behavior in the air and pure nitrogen environments are tuned. The prevailing p‐type transport observed at atmospheric pressure is reversibly turned into a dominant n‐type conduction by reducing the pressure, which can simultaneously suppress the hysteresis. The pressure control can be exploited to symmetrize and stabilize the transfer characteristics of the device as required in high‐performance logic circuits. The transistors are affected by trap states with characteristic times in the order of minutes. The channel conductance, dramatically reduced by the electron irradiation during scanning electron microscope imaging, is restored after an annealing of several minutes at room temperature. The work paves the way toward the exploitation of PdSe₂ in electronic devices by providing an experiment‐based and deep understanding of charge transport in PdSe₂ transistors subjected to electrical stress and other external agents.     

A multiscale framework for spatial gamut mapping.

Image reproduction devices, such as displays or printers, can reproduce only a limited set of colors, denoted the color gamut. The gamut depends on both theoretical and technical limitations. Reproduction device gamuts are significantly different from acquisition device gamuts. These facts raise the problem of reproducing similar color images across different devices. This is well known as the gamut mapping problem. Gamut mapping algorithms have been developed mainly using colorimetric pixel-wise principles, without considering the spatial properties of the image. The recently proposed multilevel gamut mapping approach takes spatial properties into account and has been demonstrated to outperform spatially invariant approaches. However, they have some important drawbacks. To analyze these drawbacks, we build a common framework that encompasses at least two important previous multilevel gamut mapping algorithms. Then, when the causes of the drawbacks are understood, we solve the typical problem of possible hue shifts. Next, we design appropriate operators and functions to strongly reduce both haloing and possible undesired over compression. We use challenging synthetic images, as well as real photographs, to practically show that the improvements give the expected results.