Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

Thermo-mechanical characterization of fumed silica-epoxy nanocomposites

DGEBA-based epoxy nanocomposites filled with various amounts of fumed silica nanopowders (10, 20 and 30 phr corresponding to 3.3, 6.4 and 9.2% by volume) were prepared by a solvent assisted dispersion procedure. The obtained nanocomposites were analyzed by means of differential scanning calorimetry, dynamic-mechanical thermal analysis, uniaxial tensile tests on un-notched samples and three-point bending tests on notched samples.

All the thermal and mechanical properties showed non-monotonic trends with relative minima as the silica content increased. A trend inversion in the physical properties was detected at the highest filler level tested, which was not previously observed for epoxy systems filled with comparable amounts of unmodified silica. The behavior could be explained by considering a reduction of cross-linking degree of the epoxy matrix due to the huge viscosity increase induced by the silica nanoparticles during composites preparation. On the other hand, the physical immobilization of the cross-linked matrix can be supposed to be responsible for the inversion of the properties trend at the highest filler level, which is presumably very close to the percolation threshold.     

Digital light processing stereolithography of hydroxyapatite scaffolds with bone-like architecture,permeability, and mechanical properties

This work deals with the additive manufacturing and characterization of hydroxyapatite scaffolds mimicking the trabecular architecture of cancellous bone. A novel approach was proposed relying on stereolithographic technology, which builds foam-like ceramic scaffolds by using three-dimensional (3D) micro-tomographic reconstructions of polymeric sponges as virtual templates for the manufacturing process. The layer-by-layer fabrication process involves the selective polymerization of a photocurable resin in which hydroxyapatite particles are homogeneously dispersed. Irradiation is performed by a dynamic mask that projects blue light onto the slurry. After sintering, highly-porous hydroxyapatite scaffolds (total porosity ~0.80, pore size 100-800 µm) replicating the 3D open-cell architecture of the polymeric template as well as spongy bone were obtained. Intrinsic permeability of scaffolds was determined by measuring laminar airflow alternating pressure wave drops and was found to be within 0.75-1.74 × 10⁻⁹ m², which is comparable to the range of human cancellous bone. Compressive tests were also carried out in order to determine the strength (~1.60 MPa), elastic modulus (~513 MPa) and Weibull modulus (m = 2.2) of the scaffolds. Overall, the fabrication strategy used to print hydroxyapatite scaffolds (tomographic imaging combined with digital mirror device [DMD]-based stereolithography) shows great promise for the development of porous bioceramics with bone-like architecture and mass transport properties.     

Relationship between Non-Alcoholic Fatty Liver Disease and Psoriasis: A Novel Hepato-Dermal Axis?

Over the past 10 years, it has become increasingly evident that nonalcoholic fatty liver disease (NAFLD) is a multisystem disease that affects multiple extra-hepatic organ systems and interacts with the regulation of several metabolic and immunological pathways. In this review we discuss the rapidly expanding body of clinical and epidemiological evidence supporting a strong association between NAFLD and chronic plaque psoriasis. We also briefly discuss the possible biological mechanisms underlying this association, and discuss treatment options for psoriasis that may influence NAFLD development and progression. Recent observational studies have shown that the prevalence of NAFLD (as diagnosed either by imaging or by histology) is remarkably higher in psoriatic patients (occurring in up to 50% of these patients) than in matched control subjects. Notably, psoriasis is associated with NAFLD even after adjusting for metabolic syndrome traits and other potential confounding factors. Some studies have also suggested that psoriatic patients are more likely to have the more advanced forms of NAFLD than non-psoriatic controls, and that psoriatic patients with NAFLD have more severe psoriasis than those without NAFLD. In conclusion, the published evidence argues for more careful evaluation and surveillance of NAFLD among patients with psoriasis.     

3,3'-diethylthiatricarbocyanine iodide: a highly sensitive chiroptical reporter of DNA helicity and sequence

Using UV-vis absorption and circular dichroism (CD) spectroscopies, we explored the binding interactions of 3,3'-diethylthiatricarbocyanine iodide (Cy7) with polynucleotides of different sequences and helicity. CD showed to be a very diagnostic tool giving different spectroscopic chiroptical signatures for all explored DNA sequences upon Cy7 binding. Cy7 was able to spectroscopically discriminate between the right handed B-DNA of poly(dG-dC)(2) and its left handed Z-DNA counterpart induced by spermine or Co(III)hexamine via nearly opposite induced circular dichroic signal.     

Developing pyrrole-derived antimycobacterial agents: a rational lead optimization approach

Tuberculosis (TB) represents a never-ending challenge toward which research efforts are needed. Drug resistance is the key problem that scientists in the field need to fight. The development of new drugs endowed with novel modes of action against different biological targets is of extreme importance; these new agents should also exhibit lower toxicity compared with the anti-TB drugs currently available. Furthermore, new drugs should be inexpensive since most of the TB-infected population lives in developing nations. In the last few years, numerous researchers have focused their attention on TB, leading to the discovery of some interesting compounds. Among these, the pyrrole-derived compounds we developed can be considered very promising antimycobacterial agents. Aided by molecular modeling studies, we synthesized numerous compounds characterized by the same 1,5-diarylpyrrole scaffold and elucidated very interesting antitubercular/antimycobacterial properties. Some compounds identified are extremely promising and represent a step towards the design of novel lead structures in the fight against TB. Our efforts to this end are reviewed here.     

Thermal,thermo‐mechanical,and dynamic mechanical properties of polypropylene/cycloolefin copolymer blends

Interaction of the components and physical properties of the polypropylene (PP)/cycloolefin copolymer (COC) blends were studied by means of differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), Vicat softening temperature (VST), and measurements of the coefficient of linear thermal expansion (CLTE) and of the density. The attention was focused on the blends with 90–60% of PP by wt, where the COC minority component was present in the form of short fibers. DSC, DMTA, and density measurements concurrently prove the immiscibility of PP and COC. DSC measurements reveal that crystallinity and melting temperature of the PP component slightly decrease with the fraction of COC in blends, in the range of 56–47% and 164–161°C, respectively. Storage modulus and loss modulus of the blends are in a good accord with the model predictions based on (i) the equivalent box model (EBM) and on (ii) modified equations of the percolation theory. The dependence of the VST on the blend composition is in a good correlation with the previous morphological analysis. Measurements of the coefficient of thermal expansion provide useful data as the functions of temperature and blend composition. Density of the blends was found to obey the volume additivity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Synthesis, Molecular Characterization and Preliminary Antioxidant Activity Evaluation of Quercetin Fatty Esters

Quercetin shows interesting pharmacological effects, but its use in topical applications is limited by its low skin permeability and solubility. In this work, the synthesis of highly lipophilic quercetin esters with oleic, linoleic and linolenic acid useful as topical quercetin prodrugs is reported. Partial OH esterification is advisable to maintain the antioxidant activity of these compounds; tetraesters and triesters can be achieved by modulating the reaction conditions utilized for the total esterification of quercetin. The chemical structures of the esters were proven by spectroscopic techniques; quantum chemical NMR calculation were mandatory to unequivocally assign the free position in triesters. Finally, the antioxidant activity of all the synthesized compounds was determined by the 2,2-diphenyl-1-picryl-hydrazyl method and by 2,2-azinobis(3-ethyl-benzothiazoline-6-sulfonic acid) assay.     

GAS-LIQUID REACTORS WITH VOLATILE LIQUID REACTANTS: APPROXIMATE SOLUTION FOR CONSECUTIVE BIMOLECULAR REACTIONS OF GENERAL ORDER

An approximate solution of the film model in presence of volatile liquid reactants is presented for the case of a general van de Vusse-like reaction scheme and general power-law reaction rates. The solution is obtained in a closed-form and simply requires the numerical solution of a system of nonlinear equations. The developed approximate solution is valid for any reaction regime and any number of reactions taking place within the liquid him. The application to a CSTR is discussed; this also serves as a test of the accuracy of the approximate solution carried out by comparison with the complete film model solved via the orthogonal collocation method. The numerical studies show that the approximate solution can be used with confidence for the usual encountered rate laws and that the volatility of the liquid reactants affects the performance of the CSTR mostly at the intermediate value of the Halt a number.     

Oxygen Storage Behavior of Ceria–Zirconia-Based Catalysts in the Presence of SO2

This paper investigates the effect of the presence of SO₂ in the dynamics of oxygen storage on ceria and ceria–zirconia. The introduction of SO₂ under reaction conditions at T<873 K negatively affects CO conversion under oscillating conditions on all the supports studied, owing to the formation of sulfate species. Deactivation is observed on all supports and activity is recovered only after desorption of SO₂, which occurs at 950<T<1000 K, depending on catalyst composition (Ce/Zr ratio) and treatment atmosphere. The amount of sulfur adsorbed is higher over solid solutions, reaching a maximum with Ce _x Zr_1–x O₂ (0.5<x<0.68). However this does not adversely affect activity compared to ceria. In the presence of Rh and Pd, reactivation is favored under reaction conditions. More generally, it appears that the removal of sulfates is facilitated in reductive atmospheres (both hydrogen and CO) over mixed oxides. No differences are observed following regeneration under oxidizing conditions.