Electricity consumption and CO2 capture potential in Spain

In this paper, different electricity demand scenarios for Spain are presented. Population, income per capita, energy intensity and the contribution of electricity to the total energy demand have been taken into account in the calculations. Technological role of different generation technologies, i.e. coal, nuclear, renewable, combined cycle (CC), combined heat and power (CHP) and carbon capture and storage (CCS), are examined in the form of scenarios up to 2050. Nine future scenarios corresponding to three electrical demands and three options for new capacity: minimum cost of electricity, minimum CO₂ emissions and a criterion with a compromise between CO₂ and cost (CO₂-cost criterion) have been proposed. Calculations show reduction in CO₂ emissions from 2020 to 2030, reaching a maximum CO₂ emission reduction of 90% in 2050 in an efficiency scenario with CCS and renewables. The contribution of CCS from 2030 is important with percentage values of electricity production around 22–28% in 2050. The cost of electricity (COE) increases up to 25% in 2030, and then this value remains approximately constant or decreases slightly.     

Oxidative steam reforming of ethanol over a Pt/Al2O3 catalyst in a Pd-based membrane reactor

In this study, the ability of a Pd-Ag membrane reactor of producing ultrapure hydrogen via oxidative steam reforming of ethanol has been evaluated. A self supported Pd-Ag tube of wall thickness 60 μm has been filled with a commercial Pt-based catalyst and assembled into a membrane module in a finger-like configuration. In order to evaluate the hydrogen yield behavior under different operating conditions, experimental tests have been performed at temperatures of 400 and 450 °C and pressures of 150 and 200 kPa. The oxidative steam reforming of ethanol has been carried out by feeding the membrane reactor with a gas stream containing a dilute water-ethanol mixture and air. Different water/ethanol feed flow rates (5, 10, 15 g h⁻¹), several water/ethanol (4, 10, 13) and oxygen/ethanol (0.3, 0.5, 0.7) feed molar ratios have been tested. The results pointed out that the highest hydrogen yield (moles of permeated hydrogen per mole of ethanol fed) corresponding to almost 4.1 has been attained at 450 °C and 200 kPa of lumen pressure by using a water/ethanol/oxygen feed molar ratio of 10/1/0.5.The results of these tests have been compared with those reported for the ethanol steam reforming in a Pd-Ag membrane reactor filled with the same Pt-based catalyst. This comparison has shown a positive effect on the hydrogen yield of small oxygen addition in the feed stream.     

A Ginzburg–Landau model for material aging depending on temperature

ABSTRACT

We consider a model describing the behavior of a body subject to aging and fatigue. These phenomena are supposed to be affected by both mechanical and thermal effects. The material is assumed to be viscoelastic where the stress–strain relation is based on a new fractional derivative proposed in Caputo and Fabrizio. The order of derivative is regarded as a new variable whose evolution is ruled by a Ginzburg–Landau equation. The model also includes an evolutive equation for the temperature deducing from the first law of thermodynamics. In this article, thermodynamic compatibility is shown and some numerical simulations are performed.     

Antioxidant and antiproliferative activities of phytochemicals from Quince (Cydonia vulgaris) peels

Fifty-nine secondary metabolites have been isolated from Cydonia vulgaris peels and characterised on the basis of their spectroscopic features. Among them, five metabolites, 3β-(18-hydroxylinoleoyl)-28-hydroxyurs-12-ene (12), 3β-linoleoylurs-12-en-28-oic acid (15), 3β-oleoyl-24-hydroxy-24-ethylcholesta-5,28(29)-diene (24), tiglic acid 1-O-β-d-glucopyranoside (35), and 6,9-dihydroxymegastigmasta-5,7-dien-3-one 9-O-β-d-gentiobioside (46), have been isolated and elucidated for the first time. All of the compounds were tested for their radical-scavenging and antioxidant activities by measuring their capacity to scavenge the 2,2′-diphenyl-1-picrylhydrazyl (DPPH) radical, and anion superoxide radical and to induce the reduction of Mo(VI) to Mo(V). The antiproliferative activity of all the most abundant compounds by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) bioassay on murine B16-F1 melanoma cells has been also assessed.     

An updated numerical model of the Larderello–Travale geothermal system, Italy

Larderello–Travale is one of the few geothermal systems in the world that is characterized by a reservoir pressure much lower than hydrostatic. This is a consequence of its natural evolution from an initial liquid-dominated to the current steam-dominated system. Beneath a nearly impermeable cover, the geothermal reservoir consists of carbonate-anhydrite formations and, at greater depth, by metamorphic rocks. The shallow reservoir has temperatures in the range of 220–250 °C, and pressures of about 20 bar at a depth of 1000 m, while the deep metamorphic reservoir has temperatures of 300–350 °C, and pressures of about 70 bar at a depth of 3000 m. The 3D numerical code “TOUGH2” has been used to conduct a regional modeling study to investigate the production mechanism of superheated steam, the interactions between the geothermal field and the surrounding deep aquifers, and the field sustainability. All the available geoscientific data collected in about one century of exploration and exploitation have been used to provide the necessary input parameters for the model, which covers an area (4900 km²) about 10 times wider than the Larderello–Travale geothermal field (400 km²). The numerical model explains the origin of the steam extracted in about one century of exploitation and shows that, at the current level, the production is sustainable at least for the next 100 years.     

Benchmark exercise on risk assessment methods applied to a virtual hydrogen refuelling station

A benchmarking exercise on quantitative risk assessment (QRA) methodologies for hydrogen safety has been conducted within the project HyQRA, under the framework of the European Network of Excellence (NoE), HySafe. The aim of the exercise was twofold: (i) to identify the differences and similarities in approaches in a QRA and their results for a hydrogen installation and (ii) to identify knowledge gaps in the various steps and parameters underlying the risk quantification of hydrogen safety.First, a reference case was defined for the benchmark: a virtual hydrogen refuelling station (HRS) in virtual surroundings comprising housing, school, shops and other vulnerable objects. For the study, a two phase approach was followed.In phase 1, all nine partners were requested to conduct a QRA according to their usual approach and experience. Basically, participants were free to define representative release cases, to apply models and frequency assessments according their own methodology, and to present risk according to their usual format. To enable inter-comparison, a required set of results data was prescribed, like distances to specific thermal radiation levels from fires and distances to specific overpressure levels. Moreover, complete documentation of assumptions, base data and references was to be reported.It was not surprising that a wide range of results was obtained, both in the applied approaches as well as in the quantitative outcomes and conclusions. This made it difficult to identify exactly which assumptions and parameters were responsible for the differences in results.These results provided the basis for a more guided QRA, the second phase. This phase 2 was defined in which the QRA was determined by a more limited number of release cases (scenarios). The partners in the project agreed to assess specific scenarios in order to identify the differences in consequence assessment approaches. The results of this phase provide a better understanding of the influence of modelling assumptions and limitations on the eventual conclusions with regard to risk to on-site people and to the off-site public.     

Determination of phthalate esters in wine using solid-phase extraction and gas chromatography–mass spectrometry

A method for the determination of six phthalate esters in wine samples has been developed. The phthalates were extracted from wine samples with an optimised solid-phase extraction method on C18 column and quantification was achieved via gas chromatography coupled with a mass spectrometer. The method was linear between 0.015 and 5.000 μg mL⁻¹ for DMP, DEP and DEHP and between 0.018 and 5.000 μg mL⁻¹ for iBP, DBP and BBP. The LOQs of DMP, DEP and DEH were 0.024 μg mL⁻¹ while those of iBP, DBP and BBP were 0.029 μg mL⁻¹. The intra-day method repeatability was between 10% and 15% RSD, whereas the inter-day method repeatability was between 13% and 21% RSD. A survey was performed on white and red wines (n = 62) from the market, winemakers and an experimental pilot plant. All the analysed samples were phthalate contaminated. Commercial wine showed higher detection frequency and level of total phthalate, DBP and BBP than those produced in a pilot plant. iBP and DEHP concentrations were similar in all the groups of samples. iBP concentration was higher in red wines than in white ones.     

Treating Prostate Cancer by Antibody–Drug Conjugates

Prostate cancer is the most frequent malignancy in the worldwide male population; it is also one of the most common among all the leading cancer-related death causes. In the last two decades, the therapeutic scenario of metastatic castration-resistant prostate cancer has been enriched by the use of chemotherapy and androgen receptor signaling inhibitors (ARSI) and, more recently, by immunotherapy and poly(ADP–ribose) polymerase (PARP) inhibitors. At the same time, several trials have shown the survival benefits related to the administration of novel ARSIs among patients with non-castration-resistant metastatic disease along with nonmetastatic castration-resistant cancer too. Consequently, the therapeutic course of this malignancy has been radically expanded, ensuring survival benefits never seen before. Among the more recently emerging agents, the so-called “antibody–drug conjugates” (ADCs) are noteworthy because of their clinical practice changing outcomes obtained in the management of other malignancies (including breast cancer). The ADCs are novel compounds consisting of cytotoxic agents (also known as the payload) linked to specific antibodies able to recognize antigens expressed over cancer cells’ surfaces. As for prostate cancer, researchers are focusing on STEAP1, TROP2, PSMA, CD46 and B7-H3 as optimal antigens which may be targeted by ADCs. In this paper, we review the pivotal trials that have currently changed the therapeutic approach to prostate cancer, both in the nonmetastatic castration-resistant and metastatic settings. Therefore, we focus on recently published and ongoing trials designed to investigate the clinical activity of ADCs against prostate malignancy, characterizing these agents. Lastly, we briefly discuss some ADCs-related issues with corresponding strategies to overwhelm them, along with future perspectives for these promising novel compounds.