Characterization of polymer‐layered silicate (clay) nanocomposites by transmission electron microscopy and X‐ray diffraction: A comparative study

Several polymer‐layered silicate (clay) nanocomposites (PLSNs) were analyzed by transmission electron microscopy (TEM) and wide‐angle X‐ray diffraction (XRD) in an effort to characterize the nanoscale dispersion of the layered silicate. The PLSNs investigated included thermoset (cyanate esters) and thermoplastic polymers (polystyrene, nylon 6, and polypropylene‐g‐maleic anhydride). The results of this study reveal that the overall nanoscale dispersion of the clay in the polymer is best described by TEM, especially when mixed morphologies are present. XRD is useful for the measurement of d‐spacings in intercalated systems but cannot always observe low clay loadings (<5%) or be used as a method to identify an exfoliated nanocomposite where no XRD peaks are present (constituting a negative result). Most importantly, the study showed that XRD is not a stand‐alone technique, and it should be used in conjunction with TEM. Our studies suggest that new definitions, or a clarification of existing definitions, are needed to properly describe the diversity of PLSN nanostructures seen in various materials. Published 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1329–1338, 2003     

Complex refractive index,single scattering albedo,and mass absorption coefficient of secondary organic aerosols generated from oxidation of biogenic and anthropogenic precursors

Refractive index and optical properties of biogenic and anthropogenic secondary organic aerosol (SOA) particles were investigated. Aerosol precursors, namely longifolene, α-pinene, 1-methylnaphthalene, phenol, and toluene were oxidized in a Teflon chamber to produce SOA particles under different initial hydrocarbon concentrations and hydroxyl radical sources, reflecting exposures to different levels of nitrogen oxides (NO_x). The real and imaginary components (n and k, respectively) of the refractive index at 375?nm and 632?nm were determined by Mie theory calculations through an iterative process, using the χ² function to evaluate the fitness of the predicted optical parameters with the measured scattering, absorption, and extinction coefficients from a Photoacoustic Extinctiometer and Cavity Attenuated Phase Shift Spectrometer. Single scattering albedo (SSA) and bulk mass absorption coefficient (MAC) at 375?nm were calculated. SSA values of SOA particles from biogenic precursors (longifolene and α-pinene) were ～0.98–0.99 (～6.3% uncertainty), reflecting purely scattering aerosols regardless of the NO_x regime. However, SOA particles from aromatic precursors were more absorbing and displayed NO_x-dependent SSA values. For 1-methylnaphthalene SOA particles, SSA values of 0.92–0.95 and ～0.75–0.90 (～6.1% uncertainty) were observed under intermediate- and high-NO_x conditions, respectively, reflecting the absorbing effects of SOA particles and NO_x chemistry for this aromatic system. In mixtures of longifolene and phenol or longifolene and toluene SOA under intermediate- and high-NO_x conditions, k values of the aromatic-related component of the SOA mixture were higher than that of 1-methylnaphthalene SOA particles. With the increase in OH exposure, k_phenol decreased from 0.10 to 0.02 and 0.22 to 0.05 for intermediate- and high-NO_x conditions, respectively. A simple relative radiative forcing calculation for urban environments at λ?=?375?nm suggests the influence of absorbing SOA particles on relative radiative forcing at this wavelength is most significant for aerosol sizes greater than 0.4?µm.

Copyright © 2019 American Association for Aerosol Research     

Surface diffusion in microporous media

The surface diffusion of He, Ne, H₂, Ar, O₂, N₂ and CO₂ through Vycor microporous glass was analyzed theoretically and experimentally in the low pressure range as a function of temperature. A statistical-mechanical treatment was carried out in terms of partition functions to derive a general equation of surface flow. It was possible to separate the surface diffusion from the total flow using a simplified working equation. The conventional method which assumes that there is no adsorbed flow for helium should be discarded, because the fraction of surface diffusion for helium ranges from 0.133 to 0.247. It is also illustrated how to predict the permeability of a new gas for the same porous medium.     

Engineering of functional supramacromolecular complexes of proteins (enzymes) using reversed micelles as matrix microreactors

The size of the inner water cavity of reversed micelles formedin a triple system ‘water-surfactant-organic solvent’can be widely varied by changing the degree of surfactant hydration.This gives grounds to use reversed micelles as matrix microreactorsfor the design of supramolecular complexes of proteins. Usingultracentrifugation analysis, it has been demonstrated thatthe oligomeric composition of various enzymes (ketoglutaratedehydrogenase, alkaline phosphatase, lactic dehydrogenase, glyceraldehyde-3-phosphatedehydrogenase) solubilized in reversed micelles of Aerosol OT[sodium bis(2-ethylehexyl)sulfosuccinate] in octane changesupon variation of the degree of hydration. An oligomeric complexforms under conditions when the radius of the micelle innercavity is big enough to incorporate this complex as a whole.At lower degrees of hydration the micelles ‘uncouple’such complexes to their components. The catalytic propertiesof various oligomeric complexes have been studied. Possibilitiesof using reversed micelles for the separation of subunits ofoligomeric enzymes under non-denaturating conditions have beendemonstrated. In particular, the isolated subunits of alkalinephosphatase, lactic dehydrogenase and glyceralde-hyde-3-phosphatedehydrogenase have been found to be active in Aerosol OT reversedmicelles. The dependences of the catalytic activity of oligomericenzymes represent saw-like curves. The maxima of the catalyticactivity observed at these curves relate to the functioningof various oligomeric forms of an enzyme. The radii of the micelleinner cavity under conditions when these maxima are observedcorrelate with the linear dimensions of the enzyme oligomericforms. Correlation of the position of a maximum with the shapeof an oligomeric complex is discussed.     

Patterns of Iridoid Glycoside Production and Induction in Plantago lanceolata and the Importance of Plant Age

Induction of allelochemicals is one way that plants efficiently deploy defenses against herbivory. In two separate experiments we investigated the time course of this inductive response and the importance of the timing of herbivory for Plantago lanceolata (Plantaginaceae). We found a localized induced response of catalpol and the ratio of catalpol to total iridoid glycosides in damaged leaves that was evident at d 6 after caterpillars of the specialist Junonia coenia were put onto the plants. On the whole plant level, we detected small, but significant changes in the iridoid glycoside metabolism of P. lanceolata on several different days following herbivory. We also found considerable change in the amounts of allelochemicals produced during P. lanceolata's ontogeny. This ontogenetic effect might help to explain some of the reasons why induction may be difficult to detect in P. lanceolata. We also investigated the importance of the timing of herbivory on P. lanceolata's inductive response, but neither herbivory after 5 wk of growth nor after 6 or 7 wk of growth induced an increase in aucubin or catalpol.     

The relationship between strength and the composition and fineness of cement

Data from new experiments and from work published during the past 40 years are subjected to regression analysis to determine the relationship between strength and the composition and fineness of cement. The original authors differed in their opinions on the relative importance of C₃S and C₃A. The controversy is examined against a background of experience with a group of materials that are representative of Portland cement in general, and in terms of an analysis based on a model in which, during the first weeks of hardening, the strength developed by C₃S depends on the proportion of C₃A in the cement.     

Impact of sand and filler materials on the hydration behavior of calcium aluminate cement

In earlier work, we have observed discrepancies relating to the early hydration of calcium aluminate cement (CAC) when comparing data from heat flow calorimetry of CAC paste with results from mortar strength tests using the crushing method. Here, we investigated on this phenomenon and found that the sand which is used as a filler exerts a major influence on CAC hydration resulting in acceleration. Furthermore, in particular fine filler materials such as, for example, microsilica, fine limestone powder, and especially α- and γ-Al₂O₃ also produced a strong hydration accelerating effect which is dependent on their specific surface area. The mechanism underlying the acceleration is that under alkaline conditions their negative surface charge attracts calcium ions as was confirmed via inductively coupled plasma atomic emission measurements. Such a layer generates favourable conditions for the nucleation of CAC hydration products (C-A-H phases). The resulting crystalline hydrates which form on the surface of the filler particles submerged in CAC cement pore solution were visualized via SEM imaging. This way, specifically selected fillers can significantly accelerate CAC hydration and save precious lithium salts which are commonly used to boost the early strength of CAC.     

Low-temperature phase formation in the SrF2–LaF3 system

Phase formation in the SrF₂–LaF₃ system was studied at temperatures ranging from 300°C to 450°C using nitrate flux. The solubility of LaF₃ in SrF₂ decreases with decreasing temperature. The equilibrium width of the solid solution region Sr_1−xLa_xF_2+x at 400°C, it is 44.6 ± 0.4 mol% LaF₃ (x = 0.446), at 350°C — 38.3 ± 0.7 mol% LaF₃ (x = 0.383), and decreases almost to zero at 300°C.     

A New Research Infrastructure for Investigating Flow Hydraulics and Process Equipment at Critical Fluid Properties

An optimized equipment design for natural gas processing and liquefaction plants becomes increasingly difficult with changing process conditions: Particularly low values of surface tension create rising challenges on the design of phase separators and column internals. The TERESA test rig at HZDR was designed to allow the investigation of multiphase thermohydraulics and phase separator performance under critical fluid properties in industrial dimensions. A versatile pipe test section is available in DN200 and equipment internals may be tested in a sectional DN300/DN500 test separator. The applied test fluid shows a high vapor-liquid density difference between 1470 and 940 kg m⁻³, viscosity as low as 0.12 mm²s⁻¹, and surface tension down to 1.3 mN m⁻¹. Volumetric liquid and vapor flow rates may be varied up to 9 and 530 m³h⁻¹ in the test rig, respectively.     

Synthesis of amphiphilic (meth)acrylates with oligo(ethylene glycol) and (or) oligo(propylene glycol) blocks by the esterification of (meth)acrylic acid

Thermoresponsive PEG-based (PEG stands polyethylene glycol) polymers are unique for use in medicine because of their low toxicity, good biocompatibility and biodegradability, but usually more hydrophobic and more toxic comonomers are used to adjust lower critical solution temperature (LCST). A convenient way to overcome this problem and to finely tune LCST is to use alkoxy oligo(ethylene glycol)- or alkoxy oligo(propylene glycol) (meth)acrylates as starting comonomers. Here we report on the conditions for the simple and affordable synthesis of methoxy oligo(propylene glycol) (meth)acrylate- and methoxy oligo(propylene glycol)-block-oligo(ethylene glycol) (meth)acrylate-based macromonomers with high yields (80%–98.7%) by the acid-catalyzed esterification of (meth)acrylic acid with alkoxy oligo(alkylene glycols) containing oligo(ethylene glycol) (OEG) and/or oligo(propylene glycol) (OPG) blocks. p-Toluene sulphonic acid (pTSA), alkyl(C₁₂–C₁₄)benzene sulfonic acid (ABSA) and H₂SO₄ were used as catalysts. It has been shown that pTSA and ABSA are practically the same in catalytic activity and are superior to sulfuric acid. The reaction orders with respect to catalyst was found to be close to 1 in all cases. It has been shown that the reaction is actually insensitive to the lengths of OEG and OPG blocks, as well as to the structure of the terminal alkyl group, while the esterification of acrylic acid (AA) proceeds much faster compared to methacrylic acid (MAA) one under the same conditions. The influence of temperature on the equilibrium conversions of alcohols was determined, which were found to be 89%–93% for the esterification of AA and 61%–86% for MAA in the temperature range of 60–120°C. A further increase in conversion was achieved by introducing an azeotropic agent (toluene), its optimal concentration was found to be 10%–15%.