Conducting Domain Walls in Lithium Niobate Single Crystals

Ferroic materials play an increasingly important role in novel (nano)electronic devices. Recently, research on domain walls (DWs) receives a big boost by the discovery of DW conductivity (DWC) in BiFeO₃ and Pb(Zr_xTi_1‐x)O₃ ferroic thin films. Here, it is demonstrated that DWC is not restricted to thin films, but equally applies to millimeter‐thick wide‐bandgap, ferroic single crystals, such as LiNbO₃. In this material transport along DWs can be switched by super‐bandgap illumination and tuned by engineering the tilting angle of DWs with respect to the polar axis. The results are consistently obtained using conductive atomic force microscopy to locally map the DWC and macroscopic contacts, thereby in addition investigating the temperature dependence, DW transport activation energies, and relaxation behavior.     

Consideration of chiral optical fibres

Circular birefringence is a property of chiral materials. In this work, we consider the use of chiral materials in optical fibres to produce circularly birefringent optical fibres and in fibres where a contrast in circular birefringence contributes to forming the waveguide. (-)-menthyl methacrylate is also investigated as a possible material for the fabrication of such fibres.     

Advances in reflective oxygen saturation monitoring with a novel in-ear sensor system: results of a human hypoxia study

Pulse oximetry is a well-established, noninvasive photoplethysmographic method to monitor vital signs. It allows us to measure cardiovascular parameters, such as heart rate and arterial oxygen saturation, and is considered an essential monitoring tool in clinical routine. However, since many of the conventional systems work in transmission mode, they can only be applied to the thinner or peripheral parts of the body, such as a finger tip. This has the major disadvantage that, in case of shock-induced centralization and a resulting drop in perfusion, such systems cannot ensure valid measurements. Therefore, we developed a reflective in-ear sensor system that can be worn in the ear channel like a headphone. Because the sensor is integrated in an ear mold and positioned very close to the trunk, reliable measurement is expected even in case of centralization. An additional advantage is that the sensor is comfortable to wear and has considerable resistance to motion artifacts. In this paper, we report on hypoxia studies with ten healthy participants which were performed to analyze the system with regard to the detection of heart rate and arterial oxygen saturation. It was shown earlier that, due to the high signal quality, heart rate can easily be detected. Using the conventional calculation principle, based on Beer-Lambert's law combined with a single-point calibration method, we now demonstrate that the detection of arterial oxygen saturation in the human ear canal is possible using reflective saturation sensors.     

“In‐field” cell temperature evaluation in solar modules through time‐dependent open circuit voltage measurements

A method for the evaluation of p–n junction cell temperature in PV modules operating in the maximum power point (MPP) mode has been proposed. The method does not require specialized equipment and (for the concentrator modules) the data on the open circuit (OC) voltage temperature coefficients measured under pulse illumination. It consists of measuring several open circuit voltage magnitudes together with temperature measurements on the external module surface near one of the cells. In this procedure, a fast transition from MPP to OC operational mode is carried out, during which a time‐dependent voltage measurement is carried out with the help of a memory oscilloscope. A “reference” OC voltage magnitude in a “cold” module (a condition, as if the cells are kept at ambient temperature) is obtained by calculations, so that there is no necessity in a fast mechanical shuttering of the module aperture area. In the case of the concentrator modules, the module OC voltage temperature coefficient can be measured, if heat sinking process is artificially modified during outdoor measurements. Copyright © 2015 John Wiley & Sons, Ltd.     

Chloride and Indium‐Chloride‐Complex Inorganic Ligands for Efficient Stabilization of Nanocrystals in Solution and Doping of Nanocrystal Solids

Here, the surface functionalization of CdSe and CdSe/CdS core/shell nanocrystals (NCs) with compact chloride and indium‐chloride‐complex ligands is reported. The ligands provide not only short interparticle distances but additionally control doping and passivation of surface trap states, leading to enhanced electronic coupling in NC‐based arrays. The solids based on these NCs show an excellent electronic transport behavior after heat treatment at the relatively low temperature of 190 °C. Indeed, the indium‐chlorido‐capped 4.5 nm CdSe NC based thin‐film field‐effect transistor reaches a saturation mobility of μ = 4.1 cm² (V s)^?1 accompanied by a low hysteresis, while retaining the typical features of strongly quantum confined semiconductor NCs. The capping with chloride ions preserves the high photoluminescence quantum yield ( ≈ 66%) of CdSe/CdS core/shell NCs even when the CdS shell is relatively thin (six monolayers). The simplicity of the chemical incorporation of chlorine and indium species via solution ligand exchange, the efficient electronic passivation of the NC surface, as well as their high stability as dispersions make these materials especially attractive for wide‐area solution‐processable fabrication of NC‐based devices.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

Ferroelectric Poling of Methylammonium Lead Iodide Thin Films

Seemingly contradictory reports on polar domains and their origin have surrounded the controversial discussion about the ferroelectricity of the methyl ammonium lead iodide (MAPbI₃) thin films that are commonly employed in perovskite solar cells. In this work, microscopic modulations of the polar domain patterns upon application of an electric poling field are correlated with macroscopic changes to the currents through the MAPbI₃ layer. Piezoresponse force microscopy is used to monitor the widening, narrowing, generation or extinction of polar domains, as well as shifts of the domain walls at room temperature under an in‐plane electric poling field that is applied between two laterally organized electrodes. This poling leads to a net polarization of individual grains and the thin film itself. Macroscopically, this net polarization results in a persistent shift of the diode characteristics that is measured across the channel between the electrodes. Both the modulation of the polar domains upon electric poling and the concurrent persistent shift of the electric currents through the device are the unambiguous hallmarks of ferroelectricity, which demonstrate that MAPbI₃ is a ferroelectric semiconductor.     

Intramolecular Dipole Coupling and Depolarization in Self‐Assembled Monolayers

Quantum mechanical and classical atomistic computational methods are used to simulate the chain‐length dependence of depolarization effects in S(CH₂)_n?1CH₃ and S(CH₂)_n?1COOH self‐assembled monolayers on gold (111) surface. These calculations show that due to weak cooperative effects, the electrostatic properties of alkanethiol monolayers are well described by the gas phase dipole moments of the molecules. However, depolarization in monolayers with the molecules carrying head‐ and tail‐group dipoles, such as COOH‐terminated monolayers, strongly depends on the degree of intramolecular dipole coupling. Thus the electrostatic properties of self‐assembled monolayers can be engineered by changing the length of the aliphatic spacer between the polar groups. The transition from strong to weak coupling regime was found to be accompanied by the change in the sign of the asymptotic value of electrostatic potential above the surface of the monolayers and hence in the sign of the metal work function change. Therefore, the use of weakly polarizable spacers between the polar groups inside the molecules forming the SAM is beneficial for accessing a wider range of work‐function changes.