Ultrafast all-optical switching in GaAlAs integrated interferometer in 1.55 mu m spectral region

The first observation is reported of ultrafast all-optical switching in an integrated asymmetric Mach-Zehnder interferometer, using the nonresonant nonlinearity in Ga/sub 0.82/Al/sub 0.18/As below half the bandgap. A relative switching fraction of more than 80% has been achieved using 330 fs pulses at around 1.55 mu m from a coupled-cavity mode-locked colour centre laser.<>     

An air curtain for Protecting Hydraulic Structures from seismic and blast effects

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 10, pp. 1–6, October, 1992.     

1-persistent carrier sense multiple access in radio channels withimperfect carrier sensing

A comprehensive analysis of a 1-persistent carrier-sense multi-access (CSMA) system using a radio channel with imperfect carrier sensing is presented and discussed. It is shown that a careful optimization of the channel state detector parameters must be performed in order to get good system performance. If the threshold of the detector is too high, the system will tend to behave like an unslotted ALOHA; if the threshold is too low, the system throughput will be zero. It is also shown that for the larger average packet rate G the system throughput is decreased. This is because for the same probability of correct channel sensing, the probability of incorrect transmissions from the waiting mode is increased     

Evaluation of the stressed-state of a bed based on emission memory effects of rocks in near-well space

Mining Institute, Moscow. Translated from Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, No. 2, pp. 26–29, March–April, 1991.     

Spectral predictions for pulse interval and width modulation

An expression for the frequency spectrum of pulse interval and width modulation (PIWM) is presented. Experimental results obtained have shown close agreement with spectral predictions from the formula. Performance figures are also included from a practical PIWM optical-fibre transmission system intended for use with TV and video signals.<>     

Sensitivity analysis of lossy coupled transmission lines

An analysis method, based on the numerical inversion of the Laplace transform, is described for the evaluation of the time domain sensitivity of networks that include lossy coupled transmission lines. The sensitivity can be calculated with respect to network components and parameters of the transmission lines. Sensitivity analysis is useful for waveform shaping and optimization. Examples and comparisons with sensitivity determined by perturbation are presented     

On the capacity of a cellular CDMA system

It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity     

Characteristic features of the corrosion and protection of heat-exchange equipment

Translated from Khimicheskoe i Neftyanoe Mashinostroenie, No. 10, pp. 30–34, October, 1991.     

The fracture stress of chemical vapour deposited diamond

The factors which control the fracture stress of chemical vapour deposited diamond have been studied using the 3-point bend geometry. Fracture stress values of 300–800 MPa for the growth side and 600–1200 MPa for the nucleation side were recorded for samples of thickness 0.4–2.4 mm. A Weibull modulus of 23 was calculated for the growth surface data, showing that the fracture stress variability was low for a brittle material. A theory based on these results demonstrates that the material behaviour is remarkably simple, depending only on the grain size and the sample thickness, regardless of wide variations in other parameters such as optical transmission and stress state. The paper also contains a possible explanation for this well-defined behaviour based on microstress variations resulting from differences in defect density in different growth sectors within a grain.