Properties of bioriented nylon 6 films related to film production technology

Four production steps, extrusion, blowing, stabilization, and finishing, are involved in the manufacture of biorented nylon 6 films. The films obtained after each step were studied by wide‐angle diffraction X‐rays, IR analysis, and density measurements. Orientation in the amorphous phase was evaluated by thermal retraction. Free volume was investigated by positron annihilation spectroscopy. Mechanical properties were tested by tensile tests, and permeability was tested with isopiestic permeameters. Quenching, after extrusion, generated an unstable γ crystalline phase and an amorphous phase. Blowing transformed the unstable γ phase into the thermodynamically stable α phase and increased the chain orientation; stabilization increased α phase crystals, favored hydrogen bond formation and, therefore, the mechanical properties, leaving unchanged the chain orientation; the final treatment increased the mechanical properties. The film permeabilities to O₂, N₂, and CO₂ were practically unchanged after each production step; this result may be explained by considering that the nanoholes, present in the films and responsible for the diffusion inside the polymer, maintained practically constant their radius, whereas their number concentration decreased slowly after thermomechanical treatments. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 559–571, 2002     

Protective coatings as a means of improving heat resistance of the refractory lining for extra-furnace steelmaking facilities

Protective coatings based on metallic aluminum are developed that can be used to improve the resistance of the refractory lining for extra-furnace steelmaking facilities. By sintering a slurry sprayed on the refractory surface, a heat-resistant gas-impermeable coating containing -corundum is formed.__________Translated from Novye Ogneupory, No. 10, pp. 61 – 63, October, 2004.     

INVESTIGATION OF THE USE OF LASER-DOPPLER VELOCIMETRY IN TWO-PHASE BUBBLY FLOWS

Understanding the dynamic phenomena of viability loss of shear sensitive cells and bubble breakage and coalescence within airlift reactors requires knowledge of local, liquid-phase hydrodynamics. The laser-Doppler velocimeter (LDV) is a non-invasive instrument which may be used to obtain this information. Experimental procedures and software were developed to detect and measure Doppler bursts in two-phase flow in a split-cylinder airlift reactor. Off-line analysis of the data indicated a detection rate approximately one order of magnitude greater than that observed using an available commercial frequency tracker. Approximately 400 to 500 observations are needed for the ensemble mean to characterize the local mean velocity to within ±5% for a superficial gas velocity of 10.4 cm/s, the highest superficial gas velocity used in these studies. The limitations, prospects, and signal-processing options for LDV in this application are also discussed     

Guayule seedling response to nitrogen fertilizers

Slow growth and high seedling mortality limit direct seeding establishment of guayule (Parthenium argentatum G.). This study was conducted to assess seedling growth enhancement by the addition of different rates and forms of N fertilizers and Ca salts. Experiments were conducted in a greenhouse with cultivar 593 under both surface and subirrigated conditions using water low in salts (salinity of 0.8 dSm^–1, SAR of 5.0 and 10 mg Ca L^–1). Under surface-irrigated conditions, seedling height and fresh plant weight increased with N application to the irrigation water to 70 mg L^–1. The best seedling growth was observed when (NH₄)₂SO₄ was added in combination with CaCl₂ or CaSO₄. Progressively less growth was observed by addition of (NH₄)₂SO₄ alone, CO(NH₂)₂ plus CaSO₄, CO(NH₂)₂ alone and Ca(NO₃)₂. When seedlings were subirrigated, however, the best growth was observed with Ca(NO₃)₂. Intermediate growth was obtained with (NH₄)₂SO₄ plus CaSO₄ and lowest growth rates with (NH₄)₂SO₄ alone. These differential responses may be explained by the differences in leaching and volatile characteristics of the N forms. Growth enhancement from N and Ca additions increased with time with significant increases 45 days after seeding. Nitrogen application with Ca may be effective amendment in promoting subsequent growth of direct seeded guayule.     

Channel-collapse effect examined with laboratory equipment and by two-dimensional calculation

Combustion, Explosion, and Shock Waves -     

Structure formation in production of yttrium-silicate materials by the sol-gel method

Materials made from yttrium silicates were synthesized by the sol-gel method. The effect of the amount of yttrium oxide, which varied from 10 to 50% (molar content), and the water:alcoholate molar ratio was investigated. Structure formation and the character of crystallization of gels in heat treatment in the 650–1300°C range were investigated. __________ Translated from Steklo i Keramika, No. 1, pp. 3–6, January, 2007.     

Mechanical relaxations in polybutene-1 and poly-4-methylpentene-1

Dynamic mechanical measurements between — 180°C and 180°C were made on both isotropic and drawn samples of polybutene-1 (PB-1) and poly-4-methylpentene-1 (P4MB1) over a wide frequency range by the use of a torsional pendulum (0.3–3 Hz), a viscoelastic spectrometer (5–90 Hz) and ultrasonic technique (3 MHz). The relaxation peaks were identified and the associated activation energies determined from Arrhenius plots. For PB-1 it was observed that orientation reduces the height and shifts up the temperature of the α_a-peak associated with large scale main-chain motion in the amorphous regions, but has little effect on the β-peak associated with side-group motion. In addition to the α_a and β relaxations a high-temperature crystalline relaxation (α_c) is also observed in P4MP1. For both the α_c and β relaxations the mechanical loss at 45° to the draw direction is much larger than that at 90°, which indicates that shear processes are involved in these relaxations.