A New Distribution System Reconfiguration Approach Using Optimum Power Flow and Sensitivity Analysis for Loss Reduction

This paper presents a new approach for distribution system reconfiguration (DSR) based on optimum power flow (OPF) in which the branch statuses (open/close) are represented by continuous functions. In the proposed approach, all branches are initially considered closed, and from the OPF results, a heuristic technique is used to determine the next loop to be broken by opening one switch. Then the list of switches that are candidates to be opened is updated, and the above process is repeated until all loops are broken, making the distribution system radial. This paper includes results and comparisons on test systems utilized in three classical papers published in the technical literature, as well as in a previous paper by the authors. Results obtained on a real large-scale distribution system are also presented     

Residual stress-affected diffusion during plasma nitriding of tool steels

Plasma nitriding of tool materials is common practice to improve the wear resistance and lifetime of tools. Machining-induced compressive residual stresses in shallow layers of some tenths of microns are observed accompanied by other characteristic properties of machined surfaces in these high-strength materials. After plasma nitriding of M2 high-speed steel, previously induced compressive residual stresses remain stable and the depth of diffusion layers decreases with increasing compressive residual stresses. This article reports investigations of plasma nitrided samples with different levels of residual stresses induced prior to the nitriding process. For comparison, experiments with bending load stresses during plasma nitriding have also been carried out. The plasma nitriding treatment was performed at constant temperature of 500 °C with a gas mixture of 5 vol pct N₂ in hydrogen. Nitriding time was varied from 30 to 120 minutes. All samples were characterized before and after plasma nitriding concerning microstructure, roughness, microhardness, chemical composition, and residual stress states. Experimental results are compared with analytical calculations on (residual) stress effects in diffusion and show a clear effect of residual and load stresses in the diffusion of nitrogen in a high-strength M2 tool steel.     

Load modeling at electric power distribution substations using dynamic load parameters estimation

This paper is focused on electric power distribution substations load modeling using dynamic load parameters estimation. The load parameters are estimated using two models: the exponential and the ZIP load models. Since the load bus voltage and parameters are known one can determine the active and reactive power injections of this bus and include these pseudo-measurements in the state estimation in order to improve observability and estimation accuracy. The dynamic parameter estimation is developed using the weighted least squares method in a recursive form and the tests are carried out based on actual measurements. It is shown that the estimated parameters (for both load models) at a distribution substation are valid, since the obtained active and reactive power residuals are very close to zero.     

Environmental Fatigue and Static Behavior of RC Beams Strengthened with Carbon-Fiber-Reinforced Polymer

Many countries around the world have tremendous needs to repair and strengthen their transportation infrastructure. Almost everywhere, traffic loads have reached levels largely exceeding design expectations. Northern countries also experience severe winter conditions that are combined with an extensive use of deicing salts and accelerate structural deterioration. In Canada, the extent of deterioration has prompted many authorities, including the federal and provincial governments, to investigate the potential use of fiber-reinforced polymer products to extend the life of their existing structures. However, it is widely recognized that the large-scale implementation of these products is often impaired by the lack of data on their durability. This paper presents an experimental project undertaken in order to assess the durability of reinforced concrete beams externally strengthened with two types of carbon-fiber-reinforced polymer (CFRP). The beams were first exposed to either wet-dry cycles or continuous immersion in water and then were loaded in fatigue. Finally, they were tested quasi-statically under four-point bending up to failure. The test results presented here provide some insights on the potential long-term performance of CFRP-strengthened beams exposed to severe environmental conditions.     

Optical modes for BiNem® LCDs

Abstract— We report on theoretical simulations and measurements of the optics of BiNem® displays, taking into account not only the luminance at normal incidence, but contrast ratio and color shift over the viewing hemisphere as well. Transmissive and reflective BiNem® modes were optimized differently, emphasizing contrast in transmission and paperlike, white appearance in reflection.     

Fine structure of the male accessory glands of Triatoma rubrofasciata (De Geer, 1773) (Hemiptera, Triatominae)

Male of Triatoma rubrofasciata has four elongated sac-like reproductive mesodermic accessory glands, lined by an inner single layer of secretory cells, with basal plasma membrane infolds and short apical microvilli, and externally enveloped by a thin visceral muscle layer. The secretory cells have a well-developed rough endoplasmic reticulum, Golgi complex, mitochondria, and secretory granules. In one day old adult the gland cells are poorly developed, presenting small, electron-transparent secretory granules scattered among the rough endoplasmatic reticulum, whereas in three days old adult these cells have the cisternae of the rough endoplasmatic reticulum varing size degree, filled with granular electrondense content. In five days old males the secretory granules increase in diameter, being released to the gland lumen. Therefore, there is an increase of the secretory activity according to male maturation.     

High-resolution subunit detection of glutamate receptor by ultrasmall gold nanoparticles

In this study, we aimed to increase the sensitivity of protein labeling using 1.4 nm gold nanoparticles and glutamate δ2 receptor (GluD2) from the postsynaptic membrane of the Purkinje cells. The very small marker size of the particles reduces the steric hindrance between antibodies leading to a higher labeling efficiency of more than one subunit per single receptor molecule. The nanoparticles are visible in 200 kV dark‐field scanning transmission electron microscope on freeze‐fractured carbon replica of nervous tissue after plasma cleaning treatment. The different elemental composition of nanoparticles as Au nanogold or CdS quantum dot can be distinguished by energy dispersive X‐ray spectroscopy. This method ensures detection of an average of three subunits per GluD2 and often labels all four of them with 1.4 nm Au nanoparticles. It is concluded that this high‐resolution microscopic method is useful for exploring the quaternary structure of membrane proteins. Microsc. Res. Tech. 75:1159–1164, 2012. © 2012 Wiley Periodicals, Inc.     

Auxetic materials — A review

Auxetic materials are endowed with a behavior that contradicts common sense, when subjected to an axial tensile load they increase their transverse dimension. In case of a compression load, they reduce their transverse dimension. Consequently, these materials have a negative Poisson’s ratio in such direction. This paper reviews research related to these materials. It presents the theories that explain their deformation behavior and reveals the important role represented by the internal structure. Their mechanical properties are explored and some potential applications for these materials are shown.     

Radio‐opaque fecal impaction and pseudo‐occlusion in a dialyzed patient taking lanthanum carbonate

Lanthanum therapy is an efficient therapy of hyperphosphoremia by chelating phosphore in the digestive tract. Lanthanum is a silvery white metallic element that belongs to group 3 of the periodic table. This drug is lightly absorbed and has low water solubility. It should be borne in mind that abdominal X‐rays of patients taking lanthanum carbonate may have a radio‐opaque appearance typical of imaging agents. This characteristic is suggested to confirm adherence of the patient by doing an abdominal X‐ray. We describe in our case a particular good compliant patient with slow digestive transit, which ends by pseudo‐occlusion.     

A Linear Stochastic Programming Model for Optimal Leveraged Portfolio Selection

The literature of portfolio optimization is extensive and covers several important aspects of the asset allocation problem. However, previous works consider simplified linear borrowing cost functions that leads to suboptimal allocations. This paper aims at efficiently solving the leveraged portfolio selection problem with a thorough borrowing cost representation comprising a number lenders with different rates and credit limits. We propose a two-stage stochastic programming model for asset and debt allocation considering a CVaR-based risk constraint and a convex piecewise-linear borrowing cost function. We compare our model to its counterpart with the fixed borrowing rate approximation used in literature. Numerical results show our model significantly improves performance in terms of risk-return trade-off.