Morphology of sealant/enamel interface after surface treatment with bioactive glass

The purpose of this study was to analyze, by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM), the morphology of sealant/enamel interface after surface treatment with Biosilicate. Before pits and fissures sealing, the occlusal surfaces of 10 sound human molars were sectioned perpendicularly at the fissures in order to obtain three slices for each tooth. Slices were randomly assigned into three groups (n = 10) according to sealing protocol: Group 1‐ Acid etching + Biosilicate + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 2‐ Acid etching + glass ionomer‐based sealant (Clinpro XT Varnish, 3M ESPE); Group 3‐ No sealing. All slices were subjected to thermal cycling (5,000 cycles; 5–55°C; dwell time: 30s). Half of the slices from each group (n = 5) were analyzed by CLSM and the other half by SEM. Groups 1 and 2 were also submitted to EDS analysis and their data were evaluated by Two‐Way ANOVA e Tukey's test (α=5%). EDS data analysis showed higher amounts of silicon (Si) ions than calcium (Ca) ions in Group 1 (P < 0.05); Group 2 presented higher amounts (P < 0.05) of Ca ions than Si ions. It may be concluded that the use of Biosilicate for surface treatment did not affect the morphology of glass ionomer‐based sealant/enamel interfaces. Microsc. Res. Tech. 78:1062–1068, 2015. © 2015 Wiley Periodicals, Inc.     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Quantification of clay dispersion in nanocomposites of styrenic polymers

Polymer‐clay nanocomposites are materials with many interesting structures, properties, and potential applications. Microstructural evaluation of a nanocomposite is not an easy task, as clay may form hierarchical structures which may look different when observed at various magnifications under a microscope, and also as the concepts of “intercalation” and “exfoliation” are not self‐sufficient to describe its morphology. In this work polymer‐clay nanocomposites of polystyrene and two styrene‐containing block copolymers (styrene‐butadiene‐styrene and styrene‐ethylene/butylene‐styrene) were prepared using three different techniques. Clay dispersion was evaluated by a recently developed microscopy image analysis procedure, combining the analysis of optical and transmission electron micrographs, and the characterization was complemented by X‐ray diffraction and rheological measurements. The results showed better clay dispersion for both block copolymers nanocomposites, mainly due to their molecular architectures. Moreover, the techniques which showed the best results involved mixing the materials in a solvent medium. POLYM. ENG. SCI., 2009. © 2009 Society of Plastics Engineers     

Large‐Area Fabrication of Periodic Arrays of Nanoholes in Metal Films and Their Application in Biosensing and Plasmonic‐Enhanced Photovoltaics

Plasmonics is a fast developing research area with a great potential for practical applications. However, the implementation of plasmonic devices requires low cost methodologies for the fabrication of organized metallic nanostructures that covers a relative large area (～1 cm²). Here the patterning of periodic arrays of nanoholes (PANHs) in gold films by using a combination of interference lithography, metal deposition, and lift off is reported. The setup allows the fabrication of periodic nanostructures with hole diameters ranging from 110 to 1000 nm, for 450 and 1800 nm of periodicity, respectively. The large areas plasmonic substrates consist of 2 cm × 2 cm gold films homogeneously covered by nanoholes and gold films patterned with a regular microarray of 200 μm diameter circular patches of PANHs. The microarray format is used for surface plasmon resonance (SPR) imaging and its potential for applications in multiplex biosensing is demonstrated. The gold films homogeneously covered by nanoholes are useful as electrodes in a thin layer organic photovoltaic. This is first example of a large area plasmonic solar cell with organized nanostructures. The fabrication approach reported here is a good candidate for the industrial‐scale production of metallic substrates for plasmonic applications in photovoltaics and biosensing.     

Organocatalyzed Conjugate Addition of Carbonyl Compounds to Nitrodienes/Nitroenynes and Synthetic Applications

The purpose of this study is to point out the synthetic utility of a new class of Michael acceptors (nitrodienes and nitroenynes). The highly enantioselective organocatalytic Michael addition of carbonyl compounds to these functionalized nitroolefins has been carried out in the presence of (S)‐diphenylprolinol silyl ether to achieve some interesting building blocks in high selectivities. The adducts thus obtained can be easily converted by taking advantage of the corresponding unsaturated carbon‐carbon bond. In presence of the double bond, metathesis or electrophilic activation could be carried out whereas in the presence of the triple bond electrophilic activation could be conducted. We thus focused on a gold‐catalyzed cyclization of the bis‐homopropargylic alcohol to afford the corresponding substituted tetrahydrofuran. Then, we also demonstrated that organic and gold catalysts were compatible in a one‐pot process. Indeed, we developed a one‐pot enantioselective organocatalytic Michael addition to a nitroenyne followed by a gold‐catalyzed acetalization/cyclization to achieve tetrahydrofuranyl ethers in high diastereo‐ and enantioselectivities with excellent yields.     

The association of dental caries with blood lead in children when adjusted for IQ and neurobehavioral performance

Associations between childhood lead exposures and dental caries in children have been reported for over 30 years, with widely varying findings and conclusions, and using measures of lead exposure which ranged from food sources and water to tooth, hair or blood lead concentrations. OBJECTIVES: This study examined the relationship of lead exposure and dental caries in a population of normatively healthy children. METHODS: This cross-sectional study used a population of 507 children aged 8-12 who were participating in a clinical trial of dental materials to examine the relationship between lead and caries. Blood lead concentrations and dental caries were examined for association in both primary and permanent teeth. Because it is possible that neurobehavioral status could be associated with both lead exposure and dental caries prevalence, we also examined neurobehavioral status of the subjects. RESULTS: A gender-specific association (males only) between lead exposure and dental caries was found in primary teeth only. Neurobehavioral measures and IQ were not associated with caries status in this population. CONCLUSIONS: This study did not support neurobehavioral status as mediating any association between lead exposure and caries in a normatively healthy population. A gender-specific association between lead and caries not previously reported was found in primary teeth, and no biological explanation for this has been suggested. We conclude that this study provides only weak evidence, if any, for an association of low-level lead exposure with dental caries.     

An exact optimization approach for a transfer line reconfiguration problem

The paper deals with a transfer line reconfiguration problem. Such lines are made of machines (workstations) located in sequence and linked by a material handling device. Each machine can be equipped with several multi-spindle heads activated sequentially. Each spindle head executes a set of operations simultaneously. If new products have to be manufactured at the line or existing products are modified, then the line has to be reconfigured in order to meet new production requirements. The objective of such reconfiguration is to reduce the investment cost for new equipment by reusing optimally the existing facilities. A new mathematical model is suggested for this optimization problem. A case study is presented to demonstrate the use of the developed optimization model. The results of numerical experiments for 41 industrial test problems are also analyzed which show that up to 51 % investment savings can be obtained with this model.     

Supplementing fresh pasture with maize,lotus, sulla and pasture silages for dairy cows in summer

A trial was conducted to compare benefits obtained from feeding four types of silage. There were two silages that contained condensed tannins (CT)—lotus (Lotus corniculatus) and sulla (Hedysarum coronarium)—maize silage or traditional ryegrass pasture silage, all fed at 5 kg dry matter (DM) cow^?1 day^?1 with restricted pasture (RP). Cows on the RP (control) treatment and those fed the silage treatments were offered an allowance of 25 kg pasture DM cow^?1 day^?1, while the full pasture (FP) cows were offered 50 kg pasture DM cow^?1 day^?1. Silage supplementation increased both DM intake and milk yield compared with cows given RP only. Cows on the lotus silage supplement and the FP treatment had significantly higher milk production than the other silage supplemented cows (P < 0.001). For cows given lotus silage, the high milk yield was probably due to a combination of the higher nutritive value of the silage and possibly to the protein‐sparing effects of the lotus condensed tannins because the total DM intake of cows fed the lotus silage was the same as that of cows given the pasture and maize silages (P > 0.25). The high milk yield of the FP treatment was mainly a result of the cows having a higher intake of pasture than cows on all the other treatments. This study demonstrated the potential benefit of silage supplementation, particularly with lotus silage, for increased milksolids yield in summer when low pasture growth rates and quality may otherwise limit production. Copyright © 2006 Society of Chemical Industry     

New Bioactive Oxylipins Formed by Non-Enzymatic Free-Radical-Catalyzed Pathways: the Phytoprostanes

In animals and plants, fatty acids with at least three double bonds can be oxidized to prostaglandin-like compounds via enzymatic and non-enzymatic pathways. The most common fatty acid precursor in mammals is arachidonic acid (C20:4) (AA) which can be converted through the cyclooxygenase pathway to a series of prostaglandins (PG). Non-enzymatic cyclization of arachidonate yields a series of isoprostanes (IsoP) which comprises all PG (minor compounds) as well as PG isomers that cannot be formed enzymatically. In contrast, in plants, α-linolenic acid (C18:3) (ALA) is the most common substrate for the allene oxide synthase pathway leading to the jasmonate (JA) family of lipid mediators. Non-enzymatic oxidation of linolenate leads to a series of C18-IsoPs termed dinor IsoP or phytoprostanes (PP). PP structurally resemble JA but cannot be formed enzymatically. We will give an overview of the biological activity of the different classes of PP and also discuss their analytical applications and the strategies developed so far for the total synthesis of PP, depending on the synthetic approaches according to the targets and which key steps serve to access the natural products.