Covalently-Bonded “Onion Type” Double Fullerenic Carbon Cages

Abstract

Three “onion type” double carbon cages (consisting of an inner sp³-hybridized C₆₀ buckminsterfullerene skeleton and an outer larger carbon cage with icosahedral symmetry, with covalent bonds between the carbon atoms of the 5-membered rings) are described and their strain energies are discussed: (i) when the outer cage is a C₁₂₀ cage derived from buckminsterfullerene by replacing each bond between two six-membered rings by an acetylenic group, the strain is smallest.; (ii) when the same derivation concerns each bond between 5- and 6-membered rings leading to a C₁₈₀ outer cage, the strain is largest.; (iii) when the outer cage is C₁₈₀ with benzenoid rings, the strain is intermediate.     

Low-voltage improved accuracy Gaussian function generator with fourth-order approximation

An original realization of a CMOS Gaussian function generator is presented. The proposed method is based on a new approximation function that is able to fourth-order match the Gaussian function. The current-mode operation of the circuit strongly reduces the technological-caused errors and the errors introduced by temperature variations, with the result of an important increasing of the accuracy for the squaring circuit that represents the functional core of the Gaussian generator (0.1%). Additionally, the bandwidth of the generator is increased as a result of its current-mode operation. Because of the utilization of the new fourth-order approximation function, the deviation from the ideal Gaussian function is smaller than 1 dB for an extended range of the input variable. The circuit is designed for implementing in 0.18 μm CMOS technology, its proposed architecture being compatible with a low-voltage operation (V_DD=1 V). The proposed Gaussian function generator based on the new approximation function allows to extend its capability of generating any continuous mathematical functions, this feature being obtained by changing the approximation function coefficients.     

Synthesis and characterization of a titanium phosphate-tellurite glass for Faraday rotators

This work is focused on investigation of thermal, structural, optical, magnetic, and magneto-optical properties of novel titanium phosphate-tellurite glass applied as Faraday rotators. The glass belonging to the system 35Li₂O–10Al₂O₃–5TiO₂–45P₂O₅–5TeO₂ was prepared by a nonconventional wet route of raw materials processing, followed by melting-quenching-annealing steps. Some important physical properties of the investigated glass have been measured and calculated, providing knowledge related to glass compactness, electronic structure, glass forming capability, etc. XRD analysis evidenced an amorphous network structure of the investigated glass. The optical absorption in the Vis domain is mainly due to Ti³⁺ ions and Te₂ clusters formed during the glass melting process. A relatively low optical absorption is noticed over 600 nm that activates a significant Faraday magneto-optical effect. Photoluminescence bands in the blue, red, and infrared domains are observed, caused by Te₂ clusters formed during the glass melting process. The magnetization in dependency on applied magnetic field reveals a complex behavior of the glass, depending on temperature. Thus, it is found a ferromagnetic behavior up to 2000 Oe, a paramagnetic component up to 40 000 Oe, followed by a diamagnetic one over 40 000 Oe. Faraday rotation angle and Verdet constant values in the visible domain are correlated with the reduced TeO₂ content of the glass.     

Multifunctional carbon nanotube coatings used as strain sensors for composite tanks

The modern strain sensors currently used in monitoring the structural properties of such tank structures suffer from a number of limitations, including a low level of sensitivity and detection. In this work, we present a novel method of structural monitoring utilizing a thin film of carbon nanotubes carefully deposited on carbon fiber composites. The nanotube film and raw material were first characterized via microscopy and spectroscopy techniques. Bowing of the tank wall was simulated by applying a three-point bend load test, which was found to strongly affect the electrical resistance of the carbon nanotube film. These measurements were very reproducible, as the film resistance returned to its original value each time that the load was slowly released. We believe that these highly sensitive carbon nanotube films are potential candidates as replacements for the current health-monitoring sensors.     

Morphology and surface properties of some siloxane–organic copolymers

BACKGROUND: It is well known that, due to their extremely low polarity, polysiloxanes are incompatible with almost any organic system. This incompatibility leads to phase separation in mixed siloxane–organic systems. RESULTS: Three siloxane–organic copolymers, poly[(5,5′‐methylene‐bis‐salicylaldehyde)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz1), poly[(2,5‐dihydroxy‐1,4‐benzoquinone)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz2) and poly[1,3‐bis(propylene)tetramethyldisiloxane diamide] (Pam), were prepared by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane with appropriate organic partners (5,5′‐methylene‐bis‐salicylaldehyde, 2,5‐dihydroxy‐1,4‐benzoquinone and oxalyl chloride, respectively). The morphologies dictated by the incompatibility between siloxane and polar organic moieties were investigated using differential scanning calorimetry and scanning electron microscopy. The surface activity of the copolymers and water vapour sorption capacity were also measured. CONCLUSION: Even though the polar sequences are very short ones, the highly flexible siloxane‐containing sequence permits the self‐assembly of these into more or less polar domains. Such an organization influences the properties of the resulting materials, an important place being occupied by the surface properties. Copyright © 2009 Society of Chemical Industry     

3D reconstruction of existing concrete bridges using optical methods

Routine bridge inspections usually consist of visual observations. These inspections are time-consuming and subjective. There is a need to identify new inspection techniques for infrastructure that reduce traffic disturbance, and improve the efficiency and reliability of the acquired data. This study compared the performance of three different imaging technologies for the three-dimensional (3D) geometric modeling of existing structures: terrestrial laser scanning, close-range photogrammetry, and infrared scanning. Each technology was used to assess six existing concrete railway bridges. The technologies were compared in terms of geometric deviations, visualization capabilities, the level of the inspector’s experience, and degree of automation. The results suggest that all methods investigated can be used to create 3D models, however, with different level of completeness. Measurements such as span length, deck widths, etc. can be extracted with good accuracy. Although promising, a full off-site inspection is currently not feasible as some areas of the bridges were difficult to capture mainly due to restricted access and narrow spaces. Measurements based on terrestrial laser scanning were closer to the reality compared to photogrammetry and infrared scanning. The study indicates the no special training is needed for photogrammetry and infrared scanning to generate a 3D geometric model.     

Heavy Metal Removal and Neutralization of Acid Mine Waste Water ‐ Kinetic Study

The influence of the apatite on the efficiency of neutralization and on heavy metal removal of acid mine waste water has been studied. The analysis of the treated waste water samples with apatite has shown an advanced purification, the concentration of the heavy metals after the treatment of the waste water with apatite being 25 to 1000 times less than the Maximum Concentration Limits admitted by European Norms (NTPA 001/2005). In order to establish the macro‐kinetic mechanism in the neutralization process, the activation energy, Ea, and the kinetic parameters, rate coefficient of reaction, k_r, and k_t were determined from the experimental results obtained in “ceramic ball‐mill” reactor. The obtained values of the activation energy Ea >> 42 kJ mol^?1 (e.g. Ea = 115.50 ± 7.50 kJ mol^?1 for a conversion of sulphuric acid η_H2SO4 = 0.05, Ea = 60.90 ± 9.50 kJ mol^?1 for η ^H2SO4 = 0.10 and Ea = 55.75 ± 10.45 kJ mol^‐1 for η ^H2SO4 = 0.15) suggest that up to a conversion of H2SO4 equal 0.15 the global process is controlled by the transformation process, adsorption followed by reaction, which means surface‐controlled reactions. At a conversion of sulphuric acid η ^H2SO4 > 0.15, the obtained values of activation energy Ea < 42 kJ mol^‐1 (e.g. Ea = 37.55 ± 4.05 kJ mol^‐1 for η ^H2SO4 = 0.2, Ea = 37.54 ± 2.54 kJ mol^‐1 for η ^H2SO4 = 0.3 and Ea = 37.44 ± 2.90 kJ mol^‐1 for η ^H2SO4 = 0.4) indicate diffusion‐controlled processes. This means a combined process model, which involves the transfer in the liquid phase followed by the chemical reaction at the surface of the solid. Kinetic parameters as rate coefficient of reaction, kr with values ranging from (5.02 ± 1.62) 10‐4 to (8.00 ± 1.55) 10‐4 (s^‐1) and transfer coefficient, kt, ranging from (8.40 ± 0.50) 10‐5 to (10.42 ± 0.65) 10‐5 (m s^‐1) were determined.