New ISFET interface circuit design with temperature compensation

An integrated and new interface circuit with temperature compensation has been developed to enhance the ISFET readout circuit stability. The bridge-type floating source circuit suitable for sensor array processing has been proposed to maintain reliable constant drain-source voltage and constant drain current (CVCC) conditions for measuring the threshold voltage variation of ISFET due to the corresponding hydrogen ion concentration in the buffer solution. The proposed circuitry applied to Si₃N₄ and Al₂O₃-gate ISFETs demonstrate a variation of the drain current less than 0.1 μA and drain-source voltage less than 1 mV for the buffer solutions with the pH value changed from 2 to 12. In addition, the scaling circuitry with the V_T temperature correction unit (extractor) and LABVIEW software are used to compensate the ISFET thermal characteristics. Experimental results show that the temperature dependence of the Si₃N₄-gate ISFET sensor improved from 8 mV/°C to less than 0.8 mV/°C.     

Ultra-wideband hybrid-mode feeds

A modified dielectric cone-loaded horn is described that maintains excellent return loss and pattern symmetry over a bandwidth ratio greater than 30:1. The mechanisms responsible for the extremely broadband operation and its application as a feed horn for a reflector antenna are discussed     

ATM‐based wireless broadband access in the local loop

Broadband networks using wireless transmission techniques are a quick and flexible means of implementing subscriber access. Unoccupied frequency bands with sufficient bandwidth to allow the transmission of digital signals at very high bit rates are found only in the microwave bands. Because the path loss is fairly high at these frequencies, the diameter of radio cells is limited to a maximum of a few kilometres. This results in a microcellular system, which is best implemented in the form of a point‐to‐multipoint system, where one radio‐base station serves all subscribers registered in that radio cell. An interactive, broadband, ATM‐based radio local loop has undergone successful trials in Munich. Copyright © 2001 John Wiley & Sons, Ltd.     

Optimized carry lookahead adders with direct feeding

This paper describes improvements to the parallel prefix adder designs and optimization algorithms of Chan, Oklobdzija, Schlag, Thomborson and Wei. Our “direct feeding” (DF) adder design avoids large signal fanouts along critical adder paths. Our “random pruning” heuristic limits the time and space required to find near-optimal DF adders, so that the search process runs in a few minutes on a Sun-4 workstation. Our improved carry lookahead adders are well suited for static CMOS implementation; our improvements may be applied to other parallel prefix CMOS circuits. Simulations with Mentor Graphics' Lsim indicate that our best DIP adders are 12% to 20% faster than the carry lookahead adders presented by Chan et al.     

Collection and Characterization of Soot from an Optical Fiber Preform Torch

To follow the development of particle morphology, silica soot is extracted from four axial positions in the flame of a torch used to manufacture optical fiber preforms by the vaporphase axial deposition method. The soot, collected by three extraction techniques, is analyzed by transmission electron microscopy and gas adsorption to identify which characteristics of the soot morphology are dependent on the sampling technique and which upon the position in the flame. Comparison is also made to other work in which silica soot was extracted from a nondiffusion flame.     

高级运动控制的实现

在许多应用中,电机被用来执行各种功能。在那些无需精确位置控制、但其它因素更为重要的应用中,过去一直使用的是结构较为简单的交流同步电机或有刷直流电机等。而现在,     

Modelling of electrostatic gate operations in the Kane solid state quantum computer

The nuclear spin quantum computer proposed by Kane [Nature 393 (1998) 133] exploits as a qubit array ³¹P dopants embedded within a silicon matrix. Single-qubit operations are controlled by the application of electrostatic potentials via a set of metallic ‘A’ gates, situated above the donors, on the silicon surface, that tune the resonance frequency of individual nuclear spins, and a globally applied RF magnetic field that flips spins at resonance. Coupling between qubits is controlled by the application of potentials via a set of ‘J’ gates, between the donors, that induce an electron-mediated coupling between nuclear spins. We report the results of the study of the electric field and potential profiles arising within the Kane device from typical gate operations. The extent to which a single nuclear spin can be tuned independently of its neighbours, by operation of an associated A-gate, is examined and key design parameters in the Kane architecture are addressed. Implications for current fabrication strategies involving the implantation of ³¹P atoms are discussed. Solution of the Poisson equation has been carried out by simulation using a TCAD modelling package (Integrated Systems Engineering AG).     

WLAN-GPRS Tight Coupling Based Interworking Architecture with Vertical Handoff Support

There have been parallel technological developments in wireless local network (WLAN) and cellular wide area network (WAN) technologies. This is evidenced by the boom in fast WLANs enabled devices, the spread of 2.5 G networks and the increasing emergence 3 G communication networks, applications and terminals. The prospects of integrating WLAN and cellular WAN technologies with support for seamless handoffs between the two heterogeneous have changed the mentality of researchers from considering WLAN technology as a threat to the future of wide area cellular networks to accepting the technology as a complementary solution. A number of architectures for interworking the two different network types have been proposed mainly based on the loose coupling interworking approach recommended by the ETSI. One of the main weaknesses anticipated with loose coupling architecture is excessive handoff latency, which may lead to data loss, traffic congestion and handoff failure. In this paper an architecture for interworking WLAN and the GPRS networks, based on the ETSI tight coupling approach, is proposed. Fredson Alfred Phiri holds a Master of Engineering Science (MEngSc) degree obtained from Multimedia University, Malaysia in 2005 and a Bachelor of Science degree in Electrical Engineering from the University of Malawi where he graduated in 2001. Mr. Phiri is currently working as a lecturer at the Polytechnic of Namibia (Namibia’s University of Science and Technology) where he also chairs the Electronics and Telecommunications (E-TEL) Research Group. He has previously worked as a lecturer at the University of Malawi, as a Telecommunications Engineer at Technocentre (Malawi), and as a Telecommunication Technician at the Malawi Telecommunications Limited (MTL). Mr. Phiri’s research interests include Integration of Mobile Data Networks, Network Programming and Powerline Communication. M.B.R. Murthy has obtained his B.E. (Electrical) from Andhra University, College of Engineering, Waltair, India, M.Sc (Engg) in Communication Systems from Regional Engineering College-Rourkela, India and PhD from Karnatak University, Dharwad, India. He has over 32 years of academic experience teaching under graduates and graduate students. He has vast research experience and has 43 publications in reputed journals and international conferences. He is a senior member at IEEE. He had six years of teaching and research experience at Multi Media University Malaysia. Currently he is Professor ECE and Dean PG engineering and R&D in GEC Gudlavalleru, India.     

Geometry-adapted hexahedral meshes improve accuracy of finite-element-method-based EEG source analysis

Mesh generation in finite-element- (FE) method-based electroencephalography (EEG) source analysis generally influences greatly the accuracy of the results. It is thus important to determine a meshing strategy well adopted to achieve both acceptable accuracy for potential distributions and reasonable computation times and memory usage. In this paper, we propose to achieve this goal by smoothing regular hexahedral finite elements at material interfaces using a node-shift approach. We first present the underlying theory for two different techniques for modeling a current dipole in FE volume conductors, a subtraction and a direct potential method. We then evaluate regular and smoothed elements in a four-layer sphere model for both potential approaches and compare their accuracy. We finally compute and visualize potential distributions for a tangentially and a radially oriented source in the somatosensory cortex in regular and geometry-adapted three-compartment hexahedra FE volume conductor models of the human head using both the subtraction and the direct potential method. On the average, node-shifting reduces both topography and magnitude errors by more than a factor of 2 for tangential and 1.5 for radial sources for both potential approaches. Nevertheless, node-shifting has to be carried out with caution for sources located within or close to irregular hexahedra, because especially for the subtraction method extreme deformations might lead to larger overall errors. With regard to realistic volume conductor modeling, node-shifted hexahedra should thus be used for the skin and skull compartments while we would not recommend deforming elements at the grey and white matter surfaces.     

Measuring thermal and mechanical stresses on optical fiber in a DC module using fiber Bragg gratings

Fiber Bragg gratings (FBGs) can be used as sensors to monitor stress and test temperature during the processing and handling of optical fiber. As the FBG experiences a combination of mechanical and thermal loading, the return Bragg wavelength will shift proportionately to the magnitude of the load. This paper discusses the use of these sensors in quantifying induced stress on fiber during the packaging of a dispersion-compensating module (DCM) and the ensuing environmental exposure. There are two potential fiber-failure modes for fiber wound in DCMs, namely microbend-induced attenuation and fiber failure from fatigue. The ability to quantify fiber stress provides a useful feedback tool in the design phase of these modules that can aid in reducing the risk of mechanical and optical failure modes. A practical characterization process was developed to decouple thermal and stress effects on FBGs based on results from current literature and from this study. Uncoated Bragg sensors were found to respond linearly between -40 to 80/spl deg/C. Gratings with a protective polymer recoat departed from the linear behavior of the uncoated gratings below -5/spl deg/C. It was determined that the recoat material places less than 25 MPa (3.6 klbf/in/sup 2/) of axial compression on the fiber at -40/spl deg/C. Four gratings with different Bragg wavelengths were spliced into 10 km of fiber and wound into a DCM. The wind-induced stress on all four gratings quickly relaxed. The module was then thermal cycled between -40 and +75/spl deg/C. The overall stress on each grating was acceptably low for reliability purposes. The maximum stress of 17 MPa (2.5 klbf/in/sup 2/) was observed at the lowest temperature.