Reaction of pyritic sulphur in coal with lime and calcined dolomite during the coking process

Various reactions occur between pyrite (FeS₂) in coal and CaO to form CaS when a finely pulverized intimate mixture of coal and CaO is coked at 900 °C in an inert atmosphere. The effectiveness of lime and calcined dolomite (CaO.MgO) in promoting this reaction has been evaluated; calcined dolomite is somewhat more effective than lime over coal/ oxide weight ratios from 2.8 to 14. The degree of conversion of pyrite to calcium sulphide at a coal/calcined dolomite weight ratio of 7 has been determined as a function of time at 900 °C; coking time in excess of 2.5 h does not have a significant effect. It has been shown that the total sulphur lost on coking coal/lime mixtures decreases and the percentage of FeS, originating from the dissociation of pyrite, converted to CaS increases as the amount of lime added increases. But although the total sulphur content of coke produced in the presence of CaO is then higher than when the coal is coked without lime, the pyritic sulphur has been converted to CaS which is more amenable to chemical conversion to H₂S. A method is outlined for determining CaS in the coked mixture in the presence of FeS.     

Sourcing the Arab Spring: A Case Study of Andy Carvin's Sources on Twitter During the Tunisian and Egyptian Revolutions

News sourcing practices are critical as they shape from whom journalists get their information and what information they obtain, mostly from elite sources. This study evaluates whether social media platforms expand the range of actors involved in the news through a quantitative content analysis of the sources cited by NPR's Andy Carvin on Twitter during the Arab Spring. Results show that, on balance, nonelite sources had a greater representation in the content than elite sources. Alternative actors accounted for nearly half of the messages. The study points to the innovative forms of production that can emerge with new communication technologies, with the journalist as a central node trusted to authenticate and interpret news flows on social awareness streams.     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.     

Mössbauer analysis of iron phases in brown coal ash and fireside deposits

The iron phases present in an electrostatic precipitator ash, an uncooled ash deposit and a cooled superheater ash deposit from Hazelwood Power Station, Australia, burning Morwell brown coal has been examined using Mössbauer spectroscopy. The principal iron phase in the precipitator ash and the uncooled ash deposit from a hot gas offtake was calcium aluminoferrite (Ca₂Fe_{2 ? x}Al_xO₅). Minor amounts of hematite (α-Fe₂O₃) and magnetite (Fe₃O₄) were also detected in the precipitator ash. The cooled superheater ash deposit contained a (Mg, Fe, Al) oxide spinel as the primary iron phase; small quantities of hematite were also detected in this deposit close to the heat exchanger interface. The formation of these iron phases has been rationalized on the basis of the average composition of coal delivered to the power station and supplementary ash chemistry data obtained from other techniques. The evidence suggests that the calcium aluminoferrite in the precipitator ash is derived from inorganic constituents (distributed throughout the coal organic matrix) and the hematite and magnetite are of mineral origin (discrete particles).     

Application of K2CO3 catalysts in the coal gasification process using nuclear heat

Conventional gasification processes use coal not only as feedstock to be gasified but also for supply of energy for reaction heat, steam production, and other purposes. With a nuclear high temperature reactor (HTR) as a source for process heat, it is possible to transform the whole of the coal feed into gas. This concept offers advantages over existing gasification processes: saving of coal, as more gas can be produced from coal; less emission of pollutants, as the HTR is used for the production of steam and electricity instead of a coal-fired boiler; and a lower production cost for the gas. However, the process has the disadvantage that the temperature is limited to the outlet temperature (950 °C max) of the helium cooling gas of the HTR. Therefore the possibility of catalytic steam gasification was examined. Model calculations based on experimental results show that use of 3–4 wt% relative to coal of K²CO³ catalyst increases the throughput of a large scale nuclear gasification plant by ≈65%, while gas production costs decrease by ≈15%. Corrosion by catalysts is not significant at low concentration (< 5 wt%) and low temperature (< 900 °C).     

Analysis of Two-Dimensional Non-Rigid Shapes

Analysis of deformable two-dimensional shapes is an important problem, encountered in numerous pattern recognition, computer vision and computer graphics applications. In this paper, we address three major problems in the analysis of non-rigid shapes: similarity, partial similarity, and correspondence. We present an axiomatic construction of similarity criteria for deformation-invariant shape comparison, based on intrinsic geometric properties of the shapes, and show that such criteria are related to the Gromov-Hausdorff distance. Next, we extend the problem of similarity computation to shapes which have similar parts but are dissimilar when considered as a whole, and present a construction of set-valued distances, based on the notion of Pareto optimality. Finally, we show that the correspondence between non-rigid shapes can be obtained as a byproduct of the non-rigid similarity problem. As a numerical framework, we use the generalized multidimensional scaling (GMDS) method, which is the numerical core of the three problems addressed in this paper.     

Over-Parameterized Variational Optical Flow

A novel optical flow estimation process based on a spatio-temporal model with varying coefficients multiplying a set of basis functions at each pixel is introduced. Previous optical flow estimation methodologies did not use such an over parameterized representation of the flow field as the problem is ill-posed even without introducing any additional parameters: Neighborhood based methods of the Lucas–Kanade type determine the flow at each pixel by constraining the flow to be described by a few parameters in small neighborhoods. Modern variational methods represent the optic flow directly via the flow field components at each pixel. The benefit of over-parametrization becomes evident in the smoothness term, which instead of directly penalizing for changes in the optic flow, accumulates a cost of deviating from the assumed optic flow model. Our proposed method is very general and the classical variational optical flow techniques are special cases of it, when used in conjunction with constant basis functions. Experimental results with the novel flow estimation process yield significant improvements with respect to the best results published so far.     

Parallel evolution using multi-chromosome cartesian genetic programming

Parallel and distributed methods for evolutionary algorithms have concentrated on maintaining multiple populations of genotypes, where each genotype in a population encodes a potential solution to the problem. In this paper, we investigate the parallelisation of the genotype itself into a collection of independent chromosomes which can be evaluated in parallel. We call this multi-chromosomal evolution (MCE). We test this approach using Cartesian Genetic Programming and apply MCE to a series of digital circuit design problems to compare the efficacy of MCE with a conventional single chromosome approach (SCE). MCE can be readily used for many digital circuits because they have multiple outputs. In MCE, an independent chromosome is assigned to each output. When we compare MCE with SCE we find that MCE allows us to evolve solutions much faster. In addition, in some cases we were able to evolve solutions with MCE that we unable to with SCE. In a case-study, we investigate how MCE can be applied to to a single objective problem in the domain of image classification, namely, the classification of breast X-rays for cancer. To apply MCE to this problem, we identify regions of interest (RoI) from the mammograms, divide the RoI into a collection of sub-images and use a chromosome to classify each sub-image. This problem allows us to evaluate various evolutionary mutation operators which can pairwise swap chromosomes either randomly or topographically or reuse chromosomes in place of other chromosomes.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60&nbsp;GHz MMW exposure-induced eye...