Effect of Deposition Rate on the Stress Evolution of Plasma-Sprayed Yttria-Stabilized Zirconia

The deposition rate plays an important role in determining the thickness, stress state, and physical properties of plasma-sprayed coatings. In this article, the effect of the deposition rate on the stress evolution during the deposition (named evolving stress) of yttria-stabilized zirconia coatings was systematically studied by varying the powder feed rate and the robot-scanning speed. The evolving stress during the deposition tends to increase with the increased deposition rate, and this tendency was less significant at a longer spray distance. In some cases, the powder feed rate had more significant influence on the evolving stress than the robot speed. This tendency can be associated with a deviation of a local deposition temperature at a place where sprayed particles are deposited from an average substrate temperature. At a further higher deposition rate, the evolving stress was relieved by introduction of macroscopic vertical cracks as well as horizontal branching cracks.     

Modelling the Spalling of Oxide Scales During Hot Rolling of Steel Strip

Production of hot rolled steel strip is carried out at temperatures at which oxidation is prone to occur. The oxide crust is subjected to stresses that are originated while growing or are due to the difference between the thermal expansion coefficients of steel and oxide. It is considered that the oxide crust will be in tension when the temperature at the surface of the steel increases and in compression when it decreases. These stresses may cause cracking, buckling and spalling of the oxide. Oxidation to hematite occurs very rapidly once the crust is detached from the surface of the steel, and, in some cases oxide dust clouds will be formed. A model was developed to predict the magnitude and nature of the stresses within the oxide layer considering the temperature changes that take place while the material is being rolled. The model predicts that the oxide crust will deform when compressed and may cause its spalling and, once this occurs it will be expected to form oxide dust clouds.     

Process Control and Characterization of NiCr Coatings by HVOF-DJ2700 System: A Process Map Approach

The concept of ‘process maps’ has been utilized to study the fundamentals of process-structure-property relationships in high velocity oxygen fuel (HVOF) sprayed coatings. Ni-20%Cr was chosen as a representative material for metallic alloys. In this paper, integrated experiments including diagnostic studies, splat collection, coating deposition, and property characterization were carried out in an effort to investigate the effects of fuel gas chemistry (fuel/oxygen ratio), total gas flow, and energy input on particle states: particle temperature (T) and velocity (V), coating formation dynamics, and properties. Coatings were deposited on an in situ curvature sensor to study residual stress evolution. The results were reconciled within the framework of process maps linking torch parameters with particle states (1st order map) and relating particle state with deposit properties (2nd order map). A strong influence of particle velocity on induced compressive stresses through peening effect is discussed. The complete tracking of the coating buildup history including particle state, residual stress evolution and deposition temperature, in addition to single splat analysis, allows the interpretation of resultant coating microstructures and properties and enables coating design with desired properties.     

Spermatozoa Transcriptional Response and Alterations in PL Proteins Properties after Exposure of Mytilus galloprovincialis to Mercury

Mercury (Hg) is an environmental pollutant that impacts human and ecosystem health. In our previous works, we reported alterations in the properties of Mytilus galloprovincialis protamine-like (PL) proteins after 24 h of exposure to subtoxic doses of toxic metals such as copper and cadmium. The present work aims to assess the effects of 24 h of exposure to 1, 10, and 100 pM HgCl₂ on spermatozoa and PL proteins of Mytilus galloprovincialis. Inductively coupled plasma–mass spectrometry indicated accumulation of this metal in the gonads of exposed mussels. Further, RT-qPCR analyses showed altered expression levels of spermatozoa mt10 and hsp70 genes. In Mytilus galloprovincialis, PL proteins represent the major basic component of sperm chromatin. These proteins, following exposure of mussels to HgCl₂, appeared, by SDS-PAGE, partly as aggregates and showed a decreased DNA-binding capacity that rendered them unable to prevent DNA damage, in the presence of CuCl₂ and H₂O₂. These results demonstrate that even these doses of HgCl₂ exposure could affect the properties of PL proteins and result in adverse effects on the reproductive system of this organism. These analyses could be useful in developing rapid and efficient chromatin-based genotoxicity assays for pollution biomonitoring programs.     

Cushing’s Syndrome Effects on the Thyroid

The most known effects of endogenous Cushing’s syndrome are the phenotypic changes and metabolic consequences. However, hypercortisolism can exert important effects on other endocrine axes. The hypothalamus–pituitary–thyroid axis activity can be impaired by the inappropriate cortisol secretion, which determinates the clinical and biochemical features of the “central hypothyroidism”. These findings have been confirmed by several clinical studies, which also showed that the cure of hypercortisolism can determine the recovery of normal hypothalamus–pituitary–thyroid axis activity. During active Cushing’s syndrome, the “immunological tolerance” guaranteed by the hypercortisolism can mask, in predisposed patients, the development of autoimmune thyroid diseases, which increases in prevalence after the resolution of hypercortisolism. However, the immunological mechanism is not the only factor that contributes to this phenomenon, which probably includes also deiodinase-impaired activity. Cushing’s syndrome can also have an indirect impact on thyroid function, considering that some drugs used for the medical control of hypercortisolism are associated with alterations in the thyroid function test. These considerations suggest the utility to check the thyroid function in Cushing’s syndrome patients, both during the active disease and after its remission.     

Proliferation to Apoptosis Tumor Cell Ratio as a Biomarker to Improve Clinical Management of Pre-Malignant and Symptomatic Plasma Cell Neoplasms

Proliferation and apoptosis of neoplastic cells are prognostic biomarkers in plasma cell neoplasms (PCNs). The prognostic capacity of proliferation to apoptosis ratio (Ratio-PA) in the era of immunomodulatory treatments is re-evaluated in 316 gammopathy of undetermined significance (MGUS), 57 smoldering multiple myeloma (SMM), and 266 multiple myeloma (MM) patients. Ratio-PA of 0.77 ± 0.12, 1.94 ± 0.52, and 11.2 ± 0.7 (p < 0.0001) were observed in MGUS, SMM, and MM patients. Ten-year overall survival (10y-OS) rates for patients with low/high Ratio-PA were 93.5%/77.3% p < 0.0001) for MGUS, 82.5%/64.7% (p < 0.05) for SMM, and 62.3%/47.0% (p < 0.05) for MM. For patients with low, intermediate, and high risk, 10y-OS for low/high Ratio-PA were 95.5%/72.9% (p < 0.0001), 74.2%/50.4% (p < 0.0001), and 35.3%/20.0% (p = 0.836), respectively. Ratio-PA was an independent prognostic factor for OS (HR = 2.119, p < 0.0001, Harrell-C-statistic = 0.7440 ± 0.0194) when co-analyzed with sex, age, and standard risk. In patients with Ratio-PA^high, only first-line therapy with VRd/VTd, but not PAD/VCD, coupled with ASCT was associated with high 10y-OS (82.7%). Tumor cell Ratio-PA estimated at diagnosis offers a prognostic biomarker that complements standard risk stratification and helps to guide the clinical management of pre-malignant and symptomatic PCNs. Every effort should be made to provide first-line therapies including VTd or VRd associated with ASCT to patients with Ratio-PA^high at higher risk of progression and death.     

Virtual Screening of FDA-Approved Drugs against Triose Phosphate Isomerase from Entamoeba histolytica and Giardia lamblia Identifies Inhibitors of Their Trophozoite Growth Phase

Infectious diseases caused by intestinal protozoan, such as Entamoeba histolytica (E. histolytica) and Giardia lamblia (G. lamblia) are a worldwide public health issue. They affect more than 70 million people every year. They colonize intestines causing primarily diarrhea; nevertheless, these infections can lead to more serious complications. The treatment of choice, metronidazole, is in doubt due to adverse effects and resistance. Therefore, there is a need for new compounds against these parasites. In this work, a structure-based virtual screening of FDA-approved drugs was performed to identify compounds with antiprotozoal activity. The glycolytic enzyme triosephosphate isomerase, present in both E. histolytica and G. lamblia, was used as the drug target. The compounds with the best average docking score on both structures were selected for the in vitro evaluation. Three compounds, chlorhexidine, tolcapone, and imatinib, were capable of inhibit growth on G. lamblia trophozoites (0.05–4.935 μg/mL), while folic acid showed activity against E. histolytica (0.186 μg/mL) and G. lamblia (5.342 μg/mL).     

Life-cycle greenhouse gas emissions and energy balances of sugarcane ethanol production in Mexico

The purpose of this work was to estimate GHG emissions and energy balances for the future expansion of sugarcane ethanol fuel production in Mexico with one current and four possible future modalities. We used the life cycle methodology that is recommended by the European Renewable Energy Directive (RED), which distinguished the following five system phases: direct Land Use Change (LUC); crop production; biomass transport to industry; industrial processing; and ethanol transport to admixture plants. Key variables affecting total GHG emissions and fossil energy used in ethanol production were LUC emissions, crop fertilization rates, the proportion of sugarcane areas that are burned to facilitate harvest, fossil fuels used in the industrial phase, and the method for allocation of emissions to co-products. The lower emissions and higher energy ratios that were observed in the present Brazilian case were mainly due to the lesser amount of fertilizers applied, also were due to the shorter distance of sugarcane transport, and to the smaller proportion of sugarcane areas that were burned to facilitate manual harvest. The resulting modality with the lowest emissions of equivalent carbon dioxide (CO_2e) was ethanol produced from direct juice and generating surplus electricity with 36.8 kgCO_2e/GJ_ethanol. This was achieved using bagasse as the only fuel source to satisfy industrial phase needs for electricity and steam. Mexican emissions were higher than those calculated for Brazil (27.5 kgCO_2e/GJ_ethanol) among all modalities. The Mexican modality with the highest ratio of renewable/fossil energy was also ethanol from sugarcane juice generating surplus electricity with 4.8 GJ_ethanol/GJ_fossil.     

Stand-alone operation of an alkaline water electrolyser fed by wind and photovoltaic systems

Over the last few years, hydrogen technologies have established themselves as key enablers in the medium and long-term development of a new energy model that offers greater sustainability and independence than the present-day one. In this respect, the integration of water electrolysis with renewable energy-based systems can play an important part in the large-scale production of sustainable hydrogen. This paper reports on the complete experimental characterisation of a 1 Nm³ h⁻¹ alkaline water electrolyser located in the Public University of Navarre (UPNa). Specifically, a study was made of the electrical performance, hydrogen production rate, purity of the gases generated and energy efficiency, for a range of operating currents (40–120 A), temperatures (35–65 °C) and pressures (5–25 bar). Additionally, an experimental study was conducted on the electrolyser operation under conditions that are characteristic of a stand-alone wind power and PV-based renewable energy system, installed at the UPNa. The results obtained for the wind power and PV emulations showed that the electrolyser performed correctly, with regard to balance of plant and its principal electrochemical characteristics. Furthermore, the mean energy efficiency of the electrolyser was 77.7% for the wind power emulation, and 78.6% for the PV emulation on a day with stable irradiance, and 78.1% on a day with highly variable irradiance (day with scattered clouds).     

Exploring time series retrieved from cardiac implantable devices for optimizing patient follow-up

Current cardiac implantable devices (IDs) are equipped with a set of sensors that can provide useful information to improve patient follow-up and prevent health deterioration in the postoperative period. In this paper, data obtained from an ID with two such sensors (a transthoracic impedance sensor and an accelerometer) are analyzed in order to evaluate their potential application for the follow-up of patients treated with a cardiac resynchronization therapy (CRT). A methodology combining spatiotemporal fuzzy coding and multiple correspondence analysis (MCA) is applied in order to: 1) reduce the dimensionality of the data and provide new synthetic indexes based on the "factorial axes" obtained from MCA; 2) interpret these factorial axes in physiological terms; and 3) analyze the evolution of the patient's status by projecting the acquired data into the plane formed by the first two factorial axes named "factorial plane." In order to classify the different evolution patterns, a new similarity measure is proposed and validated on the simulated datasets, and then, used to cluster observed data from 41 CRT patients. The obtained clusters are compared with the annotations on each patient's medical record. Two areas on the factorial plane are identified, one being correlated with a health degradation of patients and the other with a stable clinical state.