DEM analysis of acoustic wake agglomeration for mono-sized microparticles in the presence of gravitational effects

The application of the discrete element method (DEM) to numerical simulation of the acoustic agglomeration of micron-sized mono-dispersed aerosol particles is demonstrated. The conventional DEM technique used in granular dynamics is modified for the simulation of the acoustically induced attractive motion of particles in incompressible fluid. The relationship between the acoustic wake and the gravity is investigated by simulating the binary interaction of two particles for a wide range of particles’ orientations to the sound direction. The main finding obtained by simulation results shows that agglomeration time is solely predefined by the acoustic wake effect independently of gravity. On the other hand, the gravitational motion is contributed by the sound, and an increase of settling velocity due to the sound of individual particles was found. Additionally, two particles surrounded by a system of other particles are illustrated by numerical results. It was also shown that isolated particles demonstrate an overestimated increase of the agglomeration time, which was essentially reduced by the contribution of other particles in the multi-particle system.     

Nanocomposite films and coatings produced by interaction between graphite oxide and Congo red

Nanocomposite films and coatings were produced from the aqueous solutions containing different proportions of graphite oxide (GO) and Congo red by filtering through a polycarbonate membrane filter into alkaline media. They were examined by electron microscopy, Raman and FTIR spectroscopy, XRD, contact angle, and electrical conductivity measurements. It was established that the Congo red is able to interact through its amino groups with different functional groups of GO to form larger moieties composed of the nanoplatelets of GO. Raman spectroscopy revealed quinoid-like ring structure for dye adhering to the GO. In the case when the interaction occurs with the terminal functional groups located on the edges of the nanoplateletes of GO, larger crystallites in the nanocomposite are formed. The interaction between the Congo red and functional groups of GO situated in a basal plane leads to more compact structure of the nanocomposite. Pulsed laser treatment was used to reduce GO to graphene. Raman spectra of laser treated areas show positive effect of addition of the Congo red on the graphene yield in nanocomposite coatings after the laser treatment.     

Study and demonstration of pressure wave-based leak detection in a district heating network

A district heating network (DHN) is one of the most important infrastructures in cities and towns of countries with colder weather. Citizens generally use DHN services for hot water supply all year round and also for space heating during winter. It is important that in case of an accident this service would be restored as soon as possible, causing minimal damage or inconveniences for the customers. In addition, it is important to minimise losses of the DHN operator. This study demonstrated a possibility of leak location in DHN using the data from the pressure sensors in the network, employing the negative pressure wave (NPW) method. The mass balance in the DHN is measured at the heating source, which acts as a confirmation of a leak in a closed system. The experiments in the real DHN were performed and the data was used to trace the leak location. Numerical modelling tools were used to model pressure transients during pipe break accident under various conditions in order to predict the effectiveness and limitations of the leak detection system.     

Network modelling and simulation tools

Computer network technologies have been growing explosively and the study in computer networks is being a challenging task. To make this task easy, different users, researchers and companies have developed different network modelling and simulation (MS) tools. These network MS tools can be used in education and research as well as practical purposes. They vary with their characteristics. This paper reviews some of the most important network MS tools developed recently. This paper also shows a classification of the tools used in communications networks.     

Obtaining of high surface roughness copper deposits by electroless plating technique

The use of pyridine-2,6-dicarboxylic and 4-hydroxypyridine-2,6-dicarboxylic acids as copper(II) ligands in formaldehyde-containing alkaline electroless copper plating solutions allowed to obtain copper layers with extremely high surface roughness factor reaching approximately 120. The Cu deposits of higher surface area were formed at highly negative open-circuit (mixed) potentials; the correlation between copper electrode overpotential and roughness of the deposit was found and discussed. The copper films obtained demonstrate a high electrocatalytic activity in anodic formaldehyde oxidation process, the oxidation rate reaches 40 mA cm⁻² and exceeds considerably that for other copper surfaces.     

Strength evaluation of a steam distribution device in the Ignalina NPP accident localisation system

The Ignalina NPP has a pressure suppression type of confinement, which is referred to as the accident localization system (ALS). The ALS prevents the release of the radioactive material from the NPP to the environment during a loss-of-coolant accident (LOCA). Ten water pools are located in the two ALS towers (five pools in each tower), which separate the dry well from the wet well. These water pools condense the accident-generated steam and prevent high overpressures in the compartments.The steam distribution device (SDD), with the vertical vent pipes (nozzles) that are inserted under the water of the condensing pools, connects the dry well and the wet well. In case of an accident, these components must be capable of withstanding the dynamic loads generated by a LOCA for successful pressure suppression function.This paper presents the transient analysis of the SDD and their connections to the vertical steam corridors following a LOCA. A thermo-hydraulic analysis of the SDD was performed using the state-of-the-art COCOSYS code to determine pressure and temperature histories resulting from a LOCA. The finite element code NEPTUNE was used to evaluate the structural integrity of the SDD and its supporting reinforced concrete wall. Results show that, although portions of the SDD undergo plastic response and the outside surface of the vertical steam corridor reinforced concrete wall cracks, the structural integrity of the SDD and wall are maintained during a LOCA.     

Pantoea Bacteriophage vB_PagS_MED16—A Siphovirus Containing a 2′-Deoxy-7-amido-7-deazaguanosine-Modified DNA

A novel siphovirus, vB_PagS_MED16 (MED16) was isolated in Lithuania using Pantoea agglomerans strain BSL for the phage propagation. The double-stranded DNA genome of MED16 (46,103 bp) contains 73 predicted open reading frames (ORFs) encoding proteins, but no tRNA. Our comparative sequence analysis revealed that 26 of these ORFs code for unique proteins that have no reliable identity when compared to database entries. Based on phylogenetic analysis, MED16 represents a new genus with siphovirus morphology. In total, 35 MED16 ORFs were given a putative functional annotation, including those coding for the proteins responsible for virion morphogenesis, phage–host interactions, and DNA metabolism. In addition, a gene encoding a preQ₀ DNA deoxyribosyltransferase (DpdA) is present in the genome of MED16 and the LC–MS/MS analysis indicates 2′-deoxy-7-amido-7-deazaguanosine (dADG)-modified phage DNA, which, to our knowledge, has never been experimentally validated in genomes of Pantoea phages. Thus, the data presented in this study provide new information on Pantoea-infecting viruses and offer novel insights into the diversity of DNA modifications in bacteriophages.     

Social systems in terms of coherent individual neurodynamics: conceptual premises,experimental and simulation scope

After reviewing numerous theories and experiments, our research adopted the field-theoretical deductive approach to shed new light on complex social systems as coherent neurodynamic processes taking place in individual minds. In this interdisciplinary study, we have outlined some general fundamental design principles of the field-theoretical view of the oscillating agent as well as of coherent social systems. From the systems point of view, ordered social systems by their own intrinsic nature are interpreted as coherent activations via the mind-field medium of social agents. Consequently, this study not only provides the major conceptual assumptions of the proposed (Oscillation-Based Multi-Agent System [OSIMAS]) paradigm but also presents an electroencephalography-based inductive experimental validation framework and some empirical results to validate major OSIMAS assumptions. Based on the conceptual and experimental findings, we constructed modelling framework and presented oscillations-based micro (coupled oscillator energy exchange model) and macro (MEPSM1) simulation models. We also systemized some other studies and applications, which are most relevant to the work presented here.