A fuzzy model for predicting burns in surface grinding of steel

Existing analytical thermal models for predicting surface burns due to grinding have limited use because of their reliance on parameters that are not readily obtainable in practice. This paper presents a practical and consistent fuzzy rule-based model for estimating the grinding conditions at which “burn limits” occur. The model consists of 37 absolute and eight relative rules. It has a wide range of applications over many types of steels, Alundum wheels, and grinding conditions. It is also simple to implement, from a rule-chart mode to an intelligent on-line adaptive control mode.     

脉冲涡流和电磁声换能器双探头无损检测

在许多情况下，只应用一种NDT技术存在不足，这就迫使NDT操作人员使用一种以上的技术以保证检测出危害被检物使用寿命或功能的缺陷。但分别实施多种技术的检测，就会延长检验时间。介绍了一种新的NDT设施，采用两种不同的非接触无损检测技术进行互补，即电磁声换能器（EMAT）和脉冲涡流（PEC）探头。检测结果表明，脉冲涡流和电磁声换能器因是非接触，所以可应用于材料生产过程中的自动在线检验，也可用于在役检验。     

Validity of dynamic electrochemical impedance spectra of some amine corrosion inhibitors in petroleum/water corrosive mixtures by Kramers-Kronig transformation

In our previous works, the corrosion inhibition properties of propylamine (PA), iso-propylamine (i-PA), butylamine (BA), tert-butylamine (t-BA), hexylamine (HA), ethylenediamine (EDA), diethanolamine (DEA), 3-amino-1-propanol (3-AP), 2-dimethylethanolamine (2-DEA), cyclohexylamine (CHA), N-methylcyclohexylamine (N-MCA) and dicyclohexylamine (DCHA) have been investigated by means of electrochemical impedance spectroscopy (EIS) with a carbon steel rotating disc electrode in some petroleum/water corrosive mixtures containing acetic acid and NaCl at 25 °C. In this work, the Kramers-Kronig transformations (KKTs) were applied to evaluate the validity of the impedance data of these amine compounds in hydrodynamic condition. The results obtained showed that experimental impedance data did not satisfy in K-K relations completely viz. indicated some errors. These errors were related to stray capacitances, external transmission line effects, pits formation and change in interface during data acquisition at high and low frequencies regions. In addition, the selection of a suitable equivalent circuit strongly emphasized to better interpret of EIS data which in turn cause better resulted KKTs spectra. With considering obtained transformations, more effective inhibitor was selected with regard to its charge transfer resistance, the corrosion capacitance and well satisfying in K-K relations.     

络合剂对Ni-P化学镀层在含硫介质中耐蚀性的影响

针对进口原油S含量高腐蚀严重的实际,用电化学和失重法研究方法,结合显微分析和X射线衍射分析手段,研究以柠檬酸和乳酸为络合剂的化学镀Ni-P镀层在Na2S介质中的耐蚀性。结果表明,利用两种络合剂形成的Ni-P镀层均为非晶态,其中以乳酸为络合剂的镀层含P量为10.04%,以柠檬酸为络合剂的镀层含P量为11.93%,在1.0%-2.5%的Na2S介质中,随着Na2S浓度的增加,阳极极化曲线的极化率增大,自腐蚀电位和自腐蚀电流降低。以乳酸为络合剂的镀层耐蚀性更好;两种络合剂形成的镀层在Na2S为1.5mass%时,腐蚀速度出现极大值。     

Refinement of primary carbides in AISI DC 53 cold work tool steel by thin section copper permanent mould casting and water atomization

In this study, as alternative methods to conventional production methods involving thin section copper permanent mould casting (fast solidification) and water atomization (rapid solidification) of AISI DC 53 cold work tool steel have been investigated. Thin slabs obtained by copper mould casting was homogenized at 1150 °C for one hour and then hot rolling was be applied. After hot rolling, conventional heat treatment have been applied to thin slabs. The same heat treatment procedure have been performed for a commercially available AISI DC 53 which is manufactured by thick section ingot casting and rolling. In order to investigate also the effect of rapid solidification on AISI DC 53 tool steel, steel powder was produced by water atomization technique. Experiments have revealed that thin steel slabs in permanent copper mould and rapidly solidified tool steel powder by water atomization have a more refined primary M₇C₃ carbides than commercially available steel.     

Synthesis and Characterization of Carbon Steel Corrosion Inhibitors Based on 4,5,6,7-tetrahydrobenzo[b]thiophene Scaffold

Protection of Metals and Physical Chemistry of Surfaces - Three novel inhibitors based on 4,5,6,7-tetrahydrobenzo[b]thiophene scaffold were synthesized and characterized. The inhibitive action of...     

Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

Propham mineralization in aqueous medium by anodic oxidation using boron-doped diamond anode: influence of experimental parameters on degradation kinetics and mineralization efficiency

This study aims the removal of a carbamate herbicide, propham, from aqueous solution by direct electrochemical advanced oxidation process using a boron-doped diamond (BDD) anode. This electrode produces large quantities of hydroxyl radicals from oxidation of water, which leads to the oxidative degradation of propham up to its total mineralization. Effect of operational parameters such as current, temperature, pH and supporting electrolyte on the degradation and mineralization rate was studied. The applied current and temperature exert a prominent effect on the total organic carbon (TOC) removal rate of the solutions. The mineralization of propham can be performed at any pH value between 3 and 11 without any loss in oxidation efficiency. The propham decay and its overall mineralization reaction follows a pseudo-first-order kinetics. The apparent rate constant value of propham oxidation was determined as 4.8×10⁻⁴ s⁻¹ at 100 mA and 35 °C in the presence of 50 mM Na₂SO₄ in acidic media (pH: 3). A general mineralization sequence was proposed considering the identified oxidation intermediates.     

Barriers to effective configuration management application in a project context: An empirical investigation

Configuration management (CM) is not a new set of ideas, what it does represent is an effective way for project managers to use a formalized methodology in order that they can manage status and changes to it throughout the lifecycle. This research sets out to identify and prioritize the obstacles in the effective implementation of the CM practices, categorize these obstacles into more manageable groups of factors, and analyse the effects of multiple factors on the identification and rating of these barriers. Nineteen barriers are finalized and prioritized on the basis of their criticality and as a result three groups (managerial and organizational barriers, implementation barriers, and planning and process barriers) are extracted with the help of factor analysis. This study will help both configuration management and project management professionals to plan better and avoid the impacts of these key obstacles from much earlier in the definition phase.