A Coordinated Framework of DG Allocation and Operating Strategy in Distribution System for Configuration Management under Varying Loading Patterns

Abstract

The distributed generation (DG) planning with the varying pattern of the practical load is difficult as it calls for the frequent changes in DG size and system configuration, which is neither feasible nor permissible. Rather such a DG size and a configuration, which can be utilized over a wider load pattern, are more acceptable. This work presents a coordinated approach for DG planning and system reconfiguration. While to operate a particular DG size and the system configuration over a wide range of loading pattern, the configurations are ranked under different probabilistic loading patterns. Based upon the ranking of the new configuration, the energy performance of the coordinated planning is evaluated. Further, the observations from coordinated planning are imposed on coordinated operation using harmony search algorithm (HSA). The proposed approach is tested for single as well as multi-objectives on a 33-node system. A significant improvement in the computational efforts and energy performance of the resulting configuration have been observed where losses have reduced to 81.11 and 53.77?kW with single DG and multi-DG allocation respectively.     

An Efficient Hybrid Approach to Solve Bi-objective Multi-area Dynamic Economic Emission Dispatch Problem

Abstract

Single period economic dispatch cannot handle the intertemporal constraints in multi-period environment. To cope with this issue, the extension of economic dispatch over multiple time intervals (i.e., dynamic economic dispatch) has been introduced that considers the intertemporal constraints between different time intervals. Another issue is determining the most economical generation dispatch that could supply the area demand without violating the tie-line capacity, which cannot be solved by conventional economic dispatch problems. However, this study shows that the most economic schedule of power generation cannot satisfy echo-system expectation; therefore, making a compromise between fuel cost and environmental issues, a hot-button subject in industrialized nations, seems to be crucial. To reach the goals a bi-objective multi-area dynamic economic dispatch approach, which can handle intertemporal and multi-area constraints concurrently, is proposed to assist power system operators more and more. Finally, a hybrid algorithm, namely gray wolf optimizer-particle swarm optimization is introduced to solve the proposed problem and also a set of benchmark problems. By implementing the proposed approach on two small (10-unit, three areas) and large (40-unit, four areas) scale test systems, about 3.1% and 3.3% improvement in generation cost is obtained, respectively compare to the best reported results in the literature.     

Design of Unskewed Interior Permanent Magnet Traction Motor with Asymmetric Flux Barriers and Shifted Magnets for Electric Vehicles

Abstract

Interior permanent magnet synchronous motors (IPMSMs) are commonly used in electric and hybrid electric vehicles. Nissan Leaf electric vehicle (EV) uses skewed-rotor IPMSM as a traction motor. This motor is considered as a benchmark in this work. Although, skewing improves the torque quality of the motor by reducing the torque ripple, it reduces the average torque and increases the motor manufacturing complexity and cost. This article proposes improvements to the benchmark motor torque quality without skewing. The proposed motor uses the same stator winding and rotor magnet topologies of the benchmark motor with the same geometric constraints and magnet volume. Modifications are applied to the placement of the magnets in the rotor and the shape of the flux barriers to achieve the performance requirements. The design procedure of the proposed unskewed design is illustrated. Moreover, the electromagnetic performance of the proposed design is investigated. The design shows competitive performance in terms of the average torque, torque ripple, cogging torque, and efficiency compared to the benchmark motor. The mechanical integrity of the design is also verified. The proposed design is found to be a suitable alternative to the benchmark traction motor with a reduced rotor weight and without skewing.     

Effect of the carboxylic acid monomer type on the emulsifier‐free emulsion copolymerization of styrene and butadiene

Carboxylated styrene–butadiene rubber latexes were prepared through the emulsifier‐free emulsion copolymerization of styrene and butadiene with various carboxylic acid monomers. The effects of various carboxylic acid monomers on the particle formation process were investigated. The type of carboxylic acid monomer strongly affected the particle nucleation. The number of particles and thus the polymerization rate increased with the increasing hydrophobicity of the carboxylic acid monomers. There was a significant difference in the polymerization rate per particle. The results showed that particle nucleation and growth were dependent on the hydrophilic nature of the carboxylic acid monomers. The average particle diameter of the carboxylated styrene–butadiene rubber latexes in the dry state was obtained through some calculations using direct measurements of the average particle diameter in the monomer‐swollen state by a dynamic light scattering technique. Several parameters, such as the polymerization rate, number of latex particles per unit of volume of the aqueous phase, and polymerization rate per particle, were calculated. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

ESR and FTIR studies on electron beam‐irradiated low‐density polyethylene blends

Low‐density polyethylene (LDPE) composites modified with a resin based on ethylene/methacrylic acid copolymer (surlyn) and/or citric acid were electron beam‐irradiated and investigated by electron spin resonance (ESR) at room temperature. ESR studies were carried out directly after irradiation and after various time intervals up to 72 h postirradiation. The irradiated samples showed the ESR spectrum of seven lines that was assigned to the formation of allyl radical. The nature and yield of the allyl radical of the different LDPE samples were analyzed as a function of time after irradiation. Also, the radical concentration, decay, decay rate, and kinetics of radical decay were evaluated. Fourier transform infrared (FTIR) analysis at a series of different temperatures upon cooling from room temperature to ?175°C and the reverse heating to +125°C was also carried out. The structural changes while cooling and heating of LDPE samples were investigated using FTIR spectrometry. The results showed that cooling of unirradiated LDPE samples to ?175°C results in a decrease of the intensities of IR bands. However, heating the samples from ?175°C up to +125°C led to a consequence increase in the intensities of the IR bands. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3461–3469, 2007     

Multivariate Analysis of the Stability of Spray-Dried Eupenicillium javanicum Peptidases

Peptidases occupy a central position in the enzyme market because of their importance in many areas, such as for physiological processes, foods, and detergents, as well as in the pharmaceutical, leather, and biotechnology industries. Microbial production is among the major sources of peptidases because it presents many advantages when compared with other methods. In this study, the metallopeptidases produced by the fungus Eupenicillium javanicum under a solid-state fermentation bioprocess were spray-dried. The enzymatic extract was dried using drying adjuvants, and optimal conditions for preserving enzymatic activity were studied following a Box-Behnken experimental design. The spray process factors studied were the air-drying temperature, enzyme feed flow rate, and the proportion of enzyme/additive. The responses analyzed were the dry extract yield and enzymatic activity after spray drying. Additionally, the stability of the dry extracts was assessed during 180 days at 4°C and 25°C. The results revealed extract yields of up to 66.12% and good enzymatic activity for intermediate values of temperature and adjuvant proportions. Furthermore, the dried enzymatic extracts showed potential for future commercial applications because of their stability at 25°C for 180 days.     

Density modeling of polyurethane box foam

A model based on about a dozen fundamental differential equations is used to evaluate and simulate the urethane reactions and physical processes of urethane box foaming. This work focuses on quantitative modeling of foam density for foams using water and physical blowing agents. The final densities of foams range from 30 to 90% of the density as projected with full utilization of the blowing agent. The primary sources of inefficient use of blowing agent are loss of the physical blowing during open‐air mixing and degassing—basically, physical blowing agents with boiling points between 25 and 80°C will evaporate and experience cell rupture in box foams. This loss of blowing agent would not apply to in‐line mixers used for commercial production and should be taken into account with scaling up box or cup foams commercial processes. POLYM. ENG. SCI., 54:1503–1511, 2014. © 2013 Society of Plastics Engineers     

Thieno[3,2-b]thiophene as π-bridge at different acceptor systems for electrochromic applications

Benzoselenadiazole, quinoxaline and thieno[3,2-b]thiophene are the units preferred in conducting polymers due to their electrochemical properties. There are no reports in the literature on polymers containing both moieties. In this study, novel benzoselenadiazole, quinoxaline and thieno[3,2-b]thiophene based monomers; 4-(3a,6a-dihydrothieno[3,2-b]thiophen-2-yl)-7-(thieno[3,2-b]thiophenyl)benzo[c][1,2,5]selenadiazole (BSeTT) and 2,3-bis(3,4-bis(decyloxy)phenyl)-5,8-dibromo-2,3-dihydroquinoxaline (QTT) were synthesized via Stille Coupling and polymerized electrochemically. These polymers were characterized in terms of their spectroelectrochemical and electrochemical properties by cyclic voltammetry and UV–Vis–NIR spectroscopy. Spectroelectrochemistry analysis of PBSeTT revealed an electronic transition at 525 nm corresponding to π–π* transition with a band gap of 0.93 eV whereas PQTT revealed electronic transitions at 440 and 600 nm corresponding to π–π* transitions with a band gap of 1.30 eV. Electrochromic investigations showed that PBSeTT has gray color PQTT switching between green and gray. Switching time of the polymers was evaluated by a kinetic study upon measuring the percent transmittance (%T) at the maximum contrast point.     

Electrochemistry, spectroelectrochemistry and electrochemical polymerization of titanylphthalocyanines

Detailed electrochemical characterization of tetrakis(2-dimethylaminoethylsulfanyl phthalocyaninato) oxotitanium(IV) and octakis(2-dimethylaminoethylsulfanyl phthalocyaninato) oxotitanium(IV) derivatives has been carried out by the cyclic voltammetry, differential pulse voltammetry, controlled potential chronocoulometry and spectroelectrochemical measurements. Cyclic and differential pulse voltammograms of both complexes are similar, with two metal-based and one ligand-based reduction couples having diffusion controlled reversible one-electron transfer character. Both complexes are polymerized on the working electrode electrochemically during the positive potential sweeps. Spectroelectrochemical measurements confirm the metal and ligand-based assignments of the redox couples.