Preparation of optically active poly β-propiolactones

Racemic -methyl--n-propyl--propiolactone is readily polymerized with zinc and cadmium chiral glycolates leading to optically active polyesters. The stereoelectivities observed are lower than for oxiranes and thiiranes with the same initiator system. A value of rotatory power for pure enantiomer _o, is deduced from NMR measurements in the presence of chiral solvent. The structure of polymers is discussed on the basis of NMR results.     

Feeding rats with liposomes or fish oil differently affects their lipid metabolism

Two n‐3 polyunsaturated fatty acid (PUFA)‐rich diets differing in their chemical and physical forms were given to rats during 2 wk. Liposomes [phospholipids (PL) organized in bilayer structures] made from a natural marine lipid extract or a mixture of fats containing fish oil [similar fatty acids esterified in triacylglycerols (TAG)] were used. The influence of n‐3 PUFA dietary sources on plasma parameters, i.e. TAG, cholesterol and PL concentrations, was investigated. A similar hypotriglyceridemic effect of n‐3 PUFA from liposomes or fish oil was observed. In contrast, feeding rats with liposomes led to different PL and cholesterol patterns. In the plasma of rats fed liposomes, total cholesterol amounts were positively correlated with PL levels. Liposome and fish oil feedings caused a marked increase in the amounts of n‐3 PUFA, which occurred mainly at the expense of n‐6 PUFA. However, the enrichment in n‐3 PUFA in the different plasma lipid classes differed substantially when ingested in the form of fish oil or liposomes. These results were interpreted in terms of different lipid bioavailability and metabolic fate during the digestive steps and in the liver, with the dietary source.     

Viscoelastic effects on the scratch resistance of polymers: relationship between mechanical properties and scratch properties at various temperatures

Scratch durability of polymer surfaces and coatings is becoming critical for the increasing use of these materials in new applications, replacing other materials with harder surfaces.

Scratch resistance of polymers has been the subject of numerous studies, which have led to specific definitions for plastic deformation characterization and fracture resistance during scratch testing. Viscoelastic and viscoplastic behavior during a scratch process have been related to dynamic mechanical properties that can be measured via dynamic nano-indentation testing. Yet, the understanding of the origin of the fracture process of a polymer during scratch remains approximate. Parameters like tip shape and size, scratch velocity and loading rate, applied strain and strain rates, have been considered critical parameters for the fracture process, but no correlation has been clearly established.

The goal of this work is to define and analyze scratch parameters that relate to mechanical properties. The evolution of scratch resistance parameters as a function of temperature and strain rate, compared to the evolution of dynamic mechanical properties obtained from indentation and uniaxial tensile tests over a range of temperature for poly(methyl methacrylate) (PMMA) helped in identifying a correlation between the tensile stress–strain behavior and scratch fracture toughness.

This correlation brings a new understanding of the origin of the fracture mechanisms during a scratch process. In particular, it is demonstrated that the characteristic strain applied by the indenter is a most relevant parameter to describe the fracture resistance during a scratch process, independently of the indenter geometry.     

Accurate determination of hexanal in beef bouillons by headspace solid‐phase microextraction gas‐chromatography mass‐spectrometry

Lipid oxidation has great impact on the quality of food products through flavor and taste deterioration, reduction in nutritive value, and potential toxicity of the oxidized food components. Flavor and taste deterioration can be easily perceived and it represents one of the major causes of consumer complaints in the food industry. The deterioration of sensory properties is due to the decomposition products of hydroperoxides that easily isomerize and degrade into volatile compounds. Volatile products are responsible for flavor and taste deterioration. In this study, we present the development of the solid‐phase microextraction gas chromatography‐mass spectrometry (SPME‐GC‐MS) technique to quantify low amounts (μg/g range) of secondary oxidation products, i.e. hexanal. The optimization of SPME parameters is a difficult task because of the possibility of further formation of volatile products during analysis. Different parameters such as type of fiber, exposure time of the fiber to the sample headspace and the optimal temperature of absorption have also been investigated. The complete validation of the method was achieved by the determination of linearity, limits of detection and quantification and repeatability. We demonstrated that the SPME method is a valuable tool for the quantification of low amounts of secondary oxidation products such as hexanal. Therefore, this technique can be used to detect early formation of volatiles.     

Use of molecular modeling to predict ligand efficiency in thermal stabilizers

Molecular modeling software is employed to correlate the thermal stability of an organotin molecule in PVC and molecular structure. Synthesizing model organotin compounds, measuring dynamic properties in PVC, and calculating structural and electronic properties yield an empirical relationship between the stabilizing ability of the tin molecule and electron density of the heteroatom.     

Mechanical analysis of hollow fiber membrane integrity in water reuse applications

In order to gain insight into membrane fiber failure (i.e., loss of integrity), properties of five hollow fiber membranes and four hollow fiber modules were evaluated. Specifically, membrane material, membrane symmetry, fiber modulus of elasticity, fiber diameter and thickness, module potting technique, module flow pattern (inside-out or outside-in), and coliform breakthrough were investigated. The approach combined evaluation of the above properties with mathematical modeling of structure-fluid interactions to comprehensively evaluate the properties most important for maintaining hollow fiber membrane integrity. Tensile strength testing revealed that the strongest fiber was an asymmetric polyacrylonitrile membrane fiber. The weakest fiber was a symmetric polyethylene membrane fiber. Pilot plant testing on the four membrane modules revealed that membrane symmetry may be a more important factor than potting technique for hollow fiber integrity. Results from the SEM and tensile testing were used as input to a finite element analysis model used to evaluate time-dependent structure-fluid interactions. It was found that additional stresses at the juncture of the potting material and the hollow fiber membranes exist. These stresses likely lead to the formation of fractures.     

Catalytic Combustion of Model Carbon Particles (CPs) over Pt/β-SiC Catalyst

Platinum catalyst supported on a medium surface area -SiC was successfully used for the catalytic combustion of model carbon particles and compared to a catalyst supported on a low surface area -SiC. The -SiC-based catalyst showed no deactivation as a function of cycling tests while a strong deactivation was observed on the -SiC-based catalyst. This deactivation was attributed to the progressive encapsulation of the platinum particles by a layer of silica which built up during the combustion cycle. These results render possible the use of Pt/-SiC catalyst as a diesel carbon particle catalytic filter with continuous regeneration.     

Comparison of 2D simultaneous multi-slice and 3D GRASE readout schemes for pseudo-continuous arterial spin labeling of cerebral perfusion at 3 T

Objective

In this perfusion magnetic resonance imaging study, the performances of different pseudo-continuous arterial spin labeling (PCASL) sequences were compared: two-dimensional (2D) single-shot readout with simultaneous multislice (SMS), 2D single-shot echo-planar imaging (EPI) and multishot three-dimensional (3D) gradient and spin echo (GRASE) sequences combined with a background-suppression (BS) module.

Materials and methods

Whole-brain PCASL images were acquired from seven healthy volunteers. The performance of each protocol was evaluated by extracting regional cerebral blood flow (rCBF) measures using an inline morphometric segmentation prototype. Image data postprocessing and subsequent statistical analyses enabled comparisons at the regional and sub-regional levels.

Results

The main findings were as follows: (i) Mean global CBF obtained across methods was were highly correlated, and these correlations were significantly higher among the same readout sequences. (ii) Temporal signal-to-noise ratio and gray-matter-to-white-matter CBF ratio were found to be equivalent for all 2D variants but lower than those of 3D-GRASE.

Discussion

Our study demonstrates that the accelerated SMS readout can provide increased acquisition efficiency and/or a higher temporal resolution than conventional 2D and 3D readout sequences. Among all of the methods, 3D-GRASE showed the lowest variability in CBF measurements and thus highest robustness against noise.

     

Elevated temperature Mg-Al-Sr: Creep resistance,mechanical properties,and microstructure

Mg-Al-Sr-based alloys (AJ alloys) have shown superior creep performance and tensile strength at temperatures as high as 175° with stresses up to 70 MPa. Mg-6Al-2.4Sr (AJ62x) exhibits an optimum combination of creep resistance and excellent castability, while AJ62Lx (strontium <2.1) has better ductility than other AJ formulations. The AJ alloy microstructure is characterized by the Al₄Sr-α(Mg) lamellar phase that forms at the interdendritic/grain boundary region of the primary magne sium matrix. Mg-5Al-2Sr (AJ52x) contains a ternary phase that was tentatively named Al₃Mg₁₃Sr. When the strontium level is low in AJ62x, the volume fraction of Al₄Sr is reduced, the aluminum supersaturation of the magnesium primary phase increases, and Mg₁₇Al₁₂ forms. In this article, a mechanism is proposed whereby the creep resistance decreases with the strontium level but the tensile strength and ductility increase. For more information, contact Eric Baril, Noranda, Noranda Technologies Centre, 240 Hymus Pointe-Claire (Montréal), Québec, H9R 1G5 Canada; (514) 630-9347; fax (514) 630-9379; e-mail eric.baril@ntc.noranda.com.