Effect of ethanol administration on fatty acid desaturation

The effect of ethanol on the fatty acid desaturation by rat liver has been studied using liquid diets of different composition. Acute ethanol administration increased triacylglycerols of total liver lipids, but did not modify significantly the lipidic composition of microsomes. The Δ6 and Δ5 desaturases were inhibited by ethanol whereas the Δ9 desaturase and fatty acid synthetase were apparently modified only by diet composition. NADH-cytochrome (cyt.) c reductase was partially inhibited, whereas NADH-cyt. b₅ reductase remained practically unaltered and NADPH-cyt. c reductase activity was enhanced. Decreased electrons supplied by the microsomal cyt. b₅ electron transport chain would not be the reason for the inhibition of Δ6 and Δ5 desaturases by ethanol.     

Analysis of the Content of Fatty Acid Methyl Esters in Biodiesel by Fourier-Transform Infrared Spectroscopy: Method and Comparison with Gas Chromatography

The increasing importance of sustainability in energy production has led to a global commitment to the use of fuels derived from renewable biological sources, such as biodiesel produced from plant crops or biomass residues, that do not compete with human food for their production. For a biofuel to be considered biodiesel, it must satisfy the specifications described in the UNE 14214, with the UNE-EN 14103 referring to the determination of fatty acid methyl ester content. This standard applies gas chromatography as an analytical technique. Gas chromatography is a widely used technique in the analysis of methyl ester although it has a number of drawbacks such as: long analysis times, a high consumption of high-quality gases and internal standards, does not allow the analysis of different compounds with the same column, etc. From an industrial production point of view, is necessary to know the fatty acid methyl ester content in biodiesel samples quickly. This paper studies the development of an analytical method using Fourier transform infrared spectroscopy (FTIR) as alternative to gas chromatography (GC), since it is a simple, rapid, and precise analytical technique to quantify fatty acid methyl ester content in biofuel samples.     

Higher dietary magnesium intake is associated with lower body mass index,waist circumference and serum glucose in Mexican adults

Background

Obesity and diabetes mellitus (DM) are public health concerns in Mexico of top-level priority due to their high prevalence and their growth rate in recent decades. The accumulation of adipose tissue leads to an unbalanced release of pro-oxidant factors, which causes cellular damage and favors the development of comorbidities. Recent evidence suggests that oxidative stress also promotes the accumulation of adipose tissue and the development of insulin resistance. The objective of this study is to evaluate the association between usual intake of antioxidant nutrients, specifically vitamins A, C, E and magnesium with body mass index (BMI), waist circumference (WC) and serum glucose concentrations in a representative sample of Mexican adults.

Methodology

We analyzed data on diet, BMI, WC and serum glucose from the Mexican National Health and Nutrition Survey 2012. Analysis included 20- to 65-year-old adults without a known diagnosis of DM (n?=?1573). Dietary information was obtained using the five-step multiple-pass method developed by the United States Department of Agriculture and adapted to the Mexican context. Nutrient usual intake distributions were estimated using the Iowa State University method, through the “Software for Intake Distribution Estimation” (PC-Side) v.1.02. Associations were analyzed using multivariate regression models.

Results

Higher dietary magnesium intake was associated with lower markers of adiposity, so that an increase in 10?mg per 1000?kcal/day of magnesium was associated with an average decrease in BMI of 0.72% (95% CI: -1.36, ??0.08) and 0.49?cm (95% CI: -0.92, ??0.07) of WC. Additionally, in women with normal glucose concentrations, an increase in magnesium intake was associated with an average decrease in serum glucose by 0.59% (95% CI: -1.08, ??0.09).

Conclusion

The results suggest that magnesium intake is associated with lower BMI, WC and serum glucose in Mexican population. However, more studies are required to elucidate the nature of this association.

     

Multiparameter Evaluation of the Platelet-Inhibitory Effects of Tyrosine Kinase Inhibitors Used for Cancer Treatment

Current antiplatelet drugs for the treatment of arterial thrombosis often coincide with increased bleeding risk. Several tyrosine kinase inhibitors (TKIs) for cancer treatment inhibit platelet function, with minor reported bleeding symptoms. The aim of this study was to compare the antiplatelet properties of eight TKIs to explore their possible repurposing as antiplatelet drugs. Samples of whole blood, platelet-rich plasma (PRP), or isolated platelets from healthy donors were treated with TKI or the vehicle. Measurements of platelet aggregation, activation, intracellular calcium mobilization, and whole-blood thrombus formation under flow were performed. Dasatinib and sunitinib dose-dependently reduced collagen-induced aggregation in PRP and washed platelets; pazopanib, cabozantinib, and vatalanib inhibited this response in washed platelets only; and fostamatinib, axitinib, and lapatinib showed no/limited effects. Fostamatinib reduced thrombus formation by approximately 50% on collagen and other substrates. Pazopanib, sunitinib, dasatinib, axitinib, and vatalanib mildly reduced thrombus formation on collagen by 10–50%. Intracellular calcium responses in isolated platelets were inhibited by dasatinib (>90%), fostamatinib (57%), sunitinib (77%), and pazopanib (82%). Upon glycoprotein-VI receptor stimulation, fostamatinib, cabozantinib, and vatalanib decreased highly activated platelet populations by approximately 15%, while increasing resting populations by 39%. In conclusion, the TKIs with the highest affinities for platelet-expressed molecular targets most strongly inhibited platelet functions. Dasatinib, fostamatinib, sunitinib, and pazopanib interfered in early collagen receptor-induced molecular-signaling compared with cabozantinib and vatalanib. Fostamatinib, sunitinib, pazopanib, and vatalanib may be promising for future evaluation as antiplatelet drugs.     

Silica Nanoparticles Inhibit Responses to ATP in Human Airway Epithelial 16HBE Cells

Because of their low cost and easy production, silica nanoparticles (SiNPs) are widely used in multiple manufacturing applications as anti-caking, densifying and hydrophobic agents. However, this has increased the exposure levels of the general population and has raised concerns about the toxicity of this nanomaterial. SiNPs affect the function of the airway epithelium, but the biochemical pathways targeted by these particles remain largely unknown. Here we investigated the effects of SiNPs on the responses of 16HBE14o- cultured human bronchial epithelial (16HBE) cells to the damage-associated molecular pattern ATP, using fluorometric measurements of intracellular Ca²⁺ concentration. Upon stimulation with extracellular ATP, these cells displayed a concentration-dependent increase in intracellular Ca²⁺, which was mediated by release from intracellular stores. SiNPs inhibited the Ca²⁺ responses to ATP within minutes of application and at low micromolar concentrations, which are significantly faster and more potent than those previously reported for the induction of cellular toxicity and pro-inflammatory responses. SiNPs-induced inhibition is independent from the increase in intracellular Ca²⁺ they produce, is largely irreversible and occurs via a non-competitive mechanism. These findings suggest that SiNPs reduce the ability of airway epithelial cells to mount ATP-dependent protective responses.     

Bimodal polypropylene through binary metallocene catalytic systems: comparison between hybrid and mixed heterogeneous catalysts

Polypropylene with wider or bimodal molecular weight distribution is required for numerous applications since low molecular weight chains improve processability and high molecular weight fraction is required to get good mechanical properties. There are several routes to achieve a bimodal resin but the use of a binary catalytic system seems to be the most attractive, particularly with metallocenes combination. From a previous work two metallocenes were selected because they lead to polypropylenes with average molecular weights that differ in one order of magnitude. Two types of binary systems have been investigated, hybrid catalysts (two metallocenes loaded on the same support) and physical mixtures (two independent supported metallocenes that are introduced to the reactor and start the polymerization together), using different ratios, i.e., 25–75, 50–50, 75–25, at three reaction temperatures, i.e., 30, 50 and 70 °C. Most of the binary catalytic systems lead to bimodal molecular weight distributions. Polypropylenes produced by mixed catalysts are greatly influenced by the most active catalyst, while in PP coming from hybrid catalysts, as there is a strong interaction between both metallocenes, each one contributes according to its presence in the hybrid catalyst. Therefore, properties of obtained bimodal polypropylenes are quite influenced by the ratio between both metallocenes.     

Chemical Modeling of Acid-Base Properties of Soluble Biopolymers Derived from Municipal Waste Treatment Materials

This work reports a study of the proton-binding capacity of biopolymers obtained from different materials supplied by a municipal biowaste treatment plant located in Northern Italy. One material was the anaerobic fermentation digestate of the urban wastes organic humid fraction. The others were the compost of home and public gardening residues and the compost of the mix of the above residues, digestate and sewage sludge. These materials were hydrolyzed under alkaline conditions to yield the biopolymers by saponification. The biopolymers were characterized by ¹³C NMR spectroscopy, elemental analysis and potentiometric titration. The titration data were elaborated to attain chemical models for interpretation of the proton-binding capacity of the biopolymers obtaining the acidic sites concentrations and their protonation constants. The results obtained with the models and by NMR spectroscopy were elaborated together in order to better characterize the nature of the macromolecules. The chemical nature of the biopolymers was found dependent upon the nature of the sourcing materials.     

PS/PMMA-CdSe/ZnS Quantum Dots Hybrid Nanofibers for VOCs Sensors

Hybrid nanofibers containing CdSe/ZnS quantum dots have been produced by electrospinning of hybrid latexes to characterize the electro-optical behavior of this novel luminescent sensing material. The latexes are synthesized by seeded semi-batch emulsion polymerization yielding cross-linked core-shell PS/QDs/PMMA particles with efficiently encapsulated quantum dots guaranteeing a good optical stability. Addition of polyvinyl alcohol (PVA) or polyethylene oxide (PEO) to the latexes is necessary to produce polymeric dispersions suitable for electrospinning manufacture of the nanometric fibers. The optimized polymeric dispersions are successfully electrospun obtaining fluorescent nanofibers in both cases. The hybrid nanofibers are sensitive to selected solvents (acetone, methanol and THF) and present positive response making them good candidates for the production of VOC sensors.     

Mechanosynthesis and Thermal Stability of Piezoelectric Perovskite 0.92Pb(Zn1/3Nb2/3)O3–0.08PbTiO3 Powders

The mechanosynthesis of piezoelectric perovskite 0.92Pb(Zn_1/3Nb_2/3)O₃–0.08PbTiO₃ (PZN–PT) by direct mechanochemical activation of the constituent oxides has been studied by X-ray diffraction (XRD) and transmission electron microscopy (TEM). This and the PbO flux method are the only two procedures that have succeeded in synthesizing this phase, which has recently been shown to present very high electromechanical response. The thermal stability of the single perovskite phase powders has been studied by differential thermal analysis/thermogravimetry and by high-temperature XRD as a function of mechanical activation time and pressure. The phase was found to transform into a pyrochlore type structure at temperatures above 400°C. The transformation presented a significant time dependence, and it was slowed down by increasing mechanical activation time and by the application of pressures by hot pressing. Sintering experiments were accomplished and 85% density, 77% perovskite-phase ceramics were obtained after heating at 1000°C for 1 h. Hot pressing at this temperature failed to increase the percentage of perovskite phase. Results are discussed, and procedures for obtaining dense single-phase PZN–PT-based ceramics with ultrahigh piezoelectricity are proposed.     

Biomechanical properties of single chondrocytes and chondrons determined by micromanipulation and finite-element modelling

A chondrocyte and its surrounding pericellular matrix (PCM) are defined as a chondron. Single chondrocytes and chondrons isolated from bovine articular cartilage were compressed by micromanipulation between two parallel surfaces in order to investigate their biomechanical properties and to discover the mechanical significance of the PCM. The force imposed on the cells was measured directly during compression to various deformations and then holding. When the nominal strain at the end of compression was 50 per cent, force relaxation showed that the cells were viscoelastic, but this viscoelasticity was generally insignificant when the nominal strain was 30 per cent or lower. The viscoelastic behaviour might be due to the mechanical response of the cell cytoskeleton and/or nucleus at higher deformations. A finite-element analysis was applied to simulate the experimental force-displacement/time data and to obtain mechanical property parameters of the chondrocytes and chondrons. Because of the large strains in the cells, a nonlinear elastic model was used for simulations of compression to 30 per cent nominal strain and a nonlinear viscoelastic model for 50 per cent. The elastic model yielded a Young''s modulus of 14 ± 1 kPa (mean ± s.e.) for chondrocytes and 19 ± 2 kPa for chondrons, respectively. The viscoelastic model generated an instantaneous elastic modulus of 21 ± 3 and 27 ± 4 kPa, a long-term modulus of 9.3 ± 0.8 and 12 ± 1 kPa and an apparent viscosity of 2.8 ± 0.5 and 3.4 ± 0.6 kPa s for chondrocytes and chondrons, respectively. It was concluded that chondrons were generally stiffer and showed less viscoelastic behaviour than chondrocytes, and that the PCM significantly influenced the mechanical properties of the cells.