Cavitation erosion resistance parameter of hard CAVD coatings

Nowadays the most machining tools are coated with hard coatings to prolong their lifetime and to improve their working efficiency. They are very often used for high wear applications, where they are subjected to cyclic impact loading. Main benefits of hard coatings are based on the combination of high hardness and toughness, properties that are especially important in the conditions of dynamic impact wear when high cyclic local loading is the main cause of coating degradation. A cavitation test can be a useful tool for studies of plastic deformation, crack initiation and propagation in thin hard coatings. Cavitation damage is caused by repeating action of imploding cavitation bubbles in the vicinity of solid surface.     

Optimizing substrate surface and catalyst conditions for high yield chemical vapor deposition grown epitaxially aligned single-walled carbon nanotubes

Single-crystal stable-temperature (ST)-cut quartz substrates, which have a (0 1 1 1) crystallographic plane with their surface normal lying close to 38° from the y axis ([0 1 0]), were annealed in air prior to use as a support for aligned carbon nanotube growth by chemical vapor deposition. Very smooth substrate surfaces were obtained with annealing times in the vicinity of 15 h at a temperature of 750 °C. These smooth surfaces are ideal for the growth of horizontally aligned SWCNTs with high spatial density, while less dense SWCNTs were obtained with less smooth surfaces. Under optimized growth conditions, only SWCNT are observed and they can grow to lengths in excess of 100 μm. Our findings suggest structural defects interfere with the growth process. A binary Fe/Co catalyst was employed to grow the nanotubes. No obvious dependence on the Fe:Co ratio is observed.     

Sustainable synthesis of cyclic carbonates from bio‐based polyether polyol: the structure characterization,rheological behaviour and thermal properties

The cycloaddition of CO₂ to epoxides represents a green efficient method to form bis(cyclic carbonate)s. The main purpose of the work reported in this paper was to examine the effect of the gas flow rate (20, 40, 60 and 100 mL min^–1) during carbonation on the conversion yield, chemical structure, rheological behaviour and thermal properties of the prepared compounds. A series of new bis(cyclic carbonate)s was obtained from bio‐based polyether polyol. The syntheses were performed in the absence of toxic solvents and the process did not require the use of elevated pressure. The progressive structural changes and the presence of characteristic chemical groups were monitored by attenuated total reflection Fourier transform infrared spectroscopy. The characterization of the structure by ¹H NMR and ¹³C NMR also confirmed the formation of cyclic carbonate moieties. The non‐Newtonian behaviour and the optimal mathematical model (Herschel–Bulkley) were verified by rheological measurements. The materials obtained could be used as a chemical intermediate to synthesize advanced materials based upon polyurethanes without using isocyanates. © 2019 Society of Chemical Industry     

Electrophoretic Deposition,Microstructure, and Corrosion Resistance of Porous Sol–Gel Glass/Polyetheretherketone Coatings on the Ti-13Nb-13Zr Alloy

Metallurgical and Materials Transactions A - In this study, microporous composite sol–gel glass/polyetheretherketone (SGG/PEEK) coatings were produced on the Ti-13Nb-13Zr titanium alloy by...     

Enhanced π-π interactions between a C60 fullerene and a buckle bend on a double-walled carbon nanotube

In situ low-voltage aberration corrected transmission electron microscopy (TEM) observations of the dynamic entrapment of a C₆₀ molecule in the saddle of a bent double-walled carbon nanotube is presented. The fullerene interaction is non-covalent, suggesting that enhanced π-π interactions (van der Waals forces) are responsible. Classical molecular dynamics calculations confirm that the increased interaction area associated with a buckle is sufficient to trap a fullerene. Moreover, they show hopping behavior in agreement with our experimental observations. Our findings further our understanding of carbon nanostructure interactions, which are important in the rapidly developing field of low-voltage aberration corrected TEM and nano-carbon device fabrication.      

The Role of Neurotrophins in Multiple Sclerosis��Pathological and Clinical Implications

Multiple sclerosis (MS) is a chronic inflammatory demyelinating and neurodegenerative disease of the central nervous system (CNS) with unknown etiology. It was recently suggested that autoimmunity, which had long been considered to be destructive in MS, might also play a protective role in the CNS of MS patients. Neurotrophins are polypeptides belonging to the neurotrophic factor family. While neurotrophins mediate cell survival and proliferation in the nervous system, they are also expressed within peripheral blood mononuclear cells fraction (PBMCs) of immunological system. In MS additional neurotrophic support from PBMCs might compensate relative neurotrophins deficiency in the damaged CNS tissue that needs to be repaired. Failure to produce the adequate neurotrophins concentrations might result in decreased protection of the CNS, consequently leading to increased atrophy, which is the main determinant of MS patients’ end-point disability. There are several lines of evidence, both from clinical research and animal models, suggesting that neurotrophins play a pivotal role in neuroprotective and neuroregenerative processes that are often defective in the course of MS. It seems that neuroprotective strategies might be used as potentially valuable add-on therapies, alongside traditional immunomodulatory treatment in multiple sclerosis.     

Dermatitis-inducing furanocoumarins on leaf surfaces of eight species of Rutaceous and Umbelliferous plants

Eight species of Rutaceae or Umbelliferae, known to cause or suspected of causing photophytodermatitis, had the linear furanocoumarins psoralen, bergapten, and xanthotoxin on their leaf surfaces, in concentrations varying from 0.014 to 1800 /gmg/g fresh weight, equivalent to 0.17–56% of the total leaf concentration. The higher percentage generally observed for spring leaves compared to autumn leaves suggests a higher rate of transfer of these furanocoumarins to the surface in the younger leaves. Among the plants studied,Ruta graveolens had the highest surface concentrations of all three furanocoumarins. The relatively high effectiveness in causing dermatitis of some species with low surface concentrations may be explained by a more effective mechanism of transfer of the furanocoumarins to the skin. A role in the defense of the plant is suggested by their accumulation on the plant surface.A paper based on the work reported here was presented at the Groupe Polyphénols conference, Brock University, St. Catharines, Ontario, Canada, August 19–19, 1988.     

Nutritional deficits during early development affect hippocampal structure and spatial memory later in life.

Development rates vary among individuals, often as a result of direct competition for food. Survival of young might depend on their learning abilities, but it remains unclear whether learning abilities are affected by nutrition during development. The authors demonstrated that compared with controls, 1-year-old Western scrub jays (Aphelocoma californica) that experienced nutritional deficits during early posthatching development had smaller hippocampi with fewer neurons and performed worse in a cache recovery task and in a spatial version of an associative learning task. In contrast, performance of nutritionally deprived birds was similar to that of controls in 2 color versions of an associative learning task. These findings suggest that nutritional deficits during early development have long-term consequences for hippocampal structure and spatial memory, which, in turn, are likely to have a strong impact on animals' future fitness (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Emissions from the Polish power industry

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO₂, NO_x, CO, particulate matter, greenhouse gases for instance N₂O and CO₂. For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years.

The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures.