Novel Antibacterial Copolymers Based on Quaternary Ammonium Urethane-Dimethacrylate Analogues and Triethylene Glycol Dimethacrylate

The growing scale of secondary caries and occurrence of antibiotic-resistant bacterial strains require the development of antibacterial dental composites. It can be achieved by the chemical introduction of quaternary ammonium dimethacrylates into dental composites. In this study, physicochemical and antibacterial properties of six novel copolymers consisting of 60 wt. % quaternary ammonium urethane-dimethacrylate analogues (QAUDMA) and 40 wt. % triethylene glycol dimethacrylate (TEGDMA) were investigated. Uncured compositions had suitable refractive index (RI), density (d_m), and glass transition temperature (Tg_m). Copolymers had low polymerization shrinkage (S), high degree of conversion (DC) and high glass transition temperature (Tg_p). They also showed high antibacterial effectiveness against S. aureus and E. coli bacterial strains. It was manifested by the reduction in cell proliferation, decrease in the number of bacteria adhered on their surfaces, and presence of growth inhibition zones. It can be concluded that the copolymerization of bioactive QAUDMAs with TEGDMA provided copolymers with high antibacterial activity and rewarding physicochemical properties.     

Comparison of Physicochemical,Mechanical, and (Micro-)Biological Properties of Sintered Scaffolds Based on Natural- and Synthetic Hydroxyapatite Supplemented with Selected Dopants

The specific combinations of materials and dopants presented in this work have not been previously described. The main goal of the presented work was to prepare and compare the different properties of newly developed composite materials manufactured by sintering. The synthetic- (SHAP) or natural- (NHAP) hydroxyapatite serves as a matrix and was doped with: (i) organic: multiwalled carbon nanotubes (MWCNT), fullerenes C60, (ii) inorganic: Cu nanowires. Research undertaken was aimed at seeking novel candidates for bone replacement biomaterials based on hydroxyapatite—the main inorganic component of bone, because bone reconstructive surgery is currently mostly carried out with the use of autografts; titanium or other non-hydroxyapatite -based materials. The physicomechanical properties of the developed biomaterials were tested by Scanning Electron Microscopy (SEM), Dielectric Spectroscopy (BSD), Nuclear Magnetic Resonance (NMR), and Differential Scanning Calorimetry (DSC), as well as microhardness using Vickers method. The results showed that despite obtaining porous sinters. The highest microhardness was achieved for composite materials based on NHAP. Based on NMR spectroscopy, residue organic substances could be observed in NHAP composites, probably due to the organic structures that make up the tooth. Microbiology investigations showed that the selected samples exhibit bacteriostatic properties against Gram-positive reference bacterial strain S. epidermidis (ATCC 12228); however, the property was much less pronounced against Gram-negative reference strain E. coli (ATCC 25922). Both NHAP and SHAP, as well as their doped derivates, displayed in good general compatibility, with the exception of Cu-nanowire doped derivates.     

Permanent magnets for Faraday rotators inspired by the design of the magic sphere

Faraday polarization rotators are commonly used in laser experiments. Most Faraday materials have a nonnegligible absorption, which is a limiting factor for high power laser optical isolators or for intracavity optical diodes. By using a stronger magnetic field and a shorter length of Faraday material, one can obtain the same polarization rotation and a reduced absorption. In this paper, we describe two permanent magnet arrangements that are easy to build and produce magnetic fields up to 1.7 T, substantially more than commonly used. The field homogeneity is largely sufficient for a 30 dB isolation ratio. We finally discuss the prospects for producing even larger fields with permanent magnets.     

Genetic variation in the extract viscosity of rye (Secale cereale L.) bread made from endosperm and wholemeal flour: impact of high-molecular-weight arabinoxylan, starch and protein

BACKGROUND: To verify the viscous potential of rye bread made from population and hybrid cultivars, the overall extract viscosities (EVs) of endosperm and wholemeal breads (EBs and WMBs respectively) were assessed using extractants of different pH. Also, arabinoxylan‐dependent EV (AX‐EV) was determined after combined action of starch‐ and protein‐degrading enzymes. RESULTS: The synergistic effect of a combination of α‐amylase, amyloglucosidase and protease on EV was almost two times higher than the effects observed after single addition of each of them. However, water‐extractable arabinoxylans (WE AXs) were the major contributors to EV. Unexpectedly, a decrease in the mean WE AX contents observed in the following order, WMB (31.7 g kg^?1) and EB (29.3 g kg^?1) of hybrid rye and WMB (28.8 g kg^?1) and EB (23.8 g kg^?1) of population rye, was accompanied by an increase in their AX‐EVs (12, 21, 21 and 29 mPa s respectively). CONCLUSION: In some cases the structure of WE AXs is a more important determinant of AX‐EV than their content in rye bread. Nevertheless, both factors influence AX‐EV, which may reflect the viscosity of the human small intestine after rye bread consumption, related to some beneficial metabolic effects. Therefore AX‐EV can be a preliminary parameter for selection towards high‐viscosity bread. Copyright © 2010 Society of Chemical Industry     

Metallization and investigation of electrical properties of in vitro recrystallized mSbsC-eGFP assemblies

Surface layer (SL) proteins are self-assembling nanosized arrays which can be recrystallized in solution or on surfaces. In this paper, we investigate the metallization, contact potential difference and conductivity of in vitro recrystallized mSbsC-eGFP tube-like assemblies for possible applications in nanobiotechnology. Treatment of mSbsC-eGFP tube-like structures with 150 mM Pt salt solution resulted in the formation of metallized SL assemblies decorated with Pt nanoparticles (? > 3 nm) which were closely packed and aggregated into metal clusters. Kelvin probe force microscopy (KPFM) measurements revealed that metallized and unmetallized SL templates showed different surface potential behaviours, demonstrating that the metal coating changes the electrostatic surface characteristics of SL assemblies. In situ conductivity measurements showed that unmetallized SL assemblies were not conductive. Metallized samples showed linear I-V dependence between - 1 and + 1 V with a conductivity of ～ 10(3) S m( - 1).     

Verres fluores a base de metaux lourds. Etude de la corrosion par la vapeur d'eau atmospherique

Chemical durability of $\text{ThF}{}_4\text{BaF}{}_2$ glasses has been investigated in atmospheric moisture conditions. Corrosion of the melt by the vapor contaminates all the vitreous bulk. The corrosion of OH free glass until T_g is only a surface phenomenon depending on a diffusion process.     

Co-simulation for performance prediction of integrated building and HVAC systems – An analysis of solution characteristics using a two-body system

Integrated performance simulation of buildings and heating, ventilation and air-conditioning (HVAC) systems can help in reducing energy consumption and increasing occupant comfort. However, no single building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to analyze integrated building systems and to enable rapid prototyping of innovative building and system technologies. One way to alleviate this problem is to use co-simulation to integrate different BPS tools. Co-simulation approach represents a particular case of simulation scenario where at least two simulators solve coupled differential-algebraic systems of equations and exchange data that couples these equations during the time integration.This article analyzes how co-simulation influences consistency, stability and accuracy of the numerical approximation to the solution. Consistency and zero-stability are studied for a general class of the problem, while a detailed consistency and absolute stability analysis is given for a simple two-body problem. Since the accuracy of the numerical approximation to the solution is reduced in co-simulation, the article concludes by discussing ways for how to improve accuracy.     

Carbon Monoxide and Nitric Oxide as Examples of the Youngest Class of Transmitters

The year 2021 is the 100th anniversary of the confirmation of the neurotransmission phenomenon by Otto Loewi. Over the course of the hundred years, about 100 neurotransmitters belonging to many chemical groups have been discovered. In order to celebrate the 100th anniversary of the confirmation of neurotransmitters, we present an overview of the first two endogenous gaseous transmitters i.e., nitric oxide, and carbon monoxide, which are often termed as gasotransmitters.     

Identification of potential embryokines in the bovine reproductive tract

Knowledge of the molecules used by the maternal reproductive tract to regulate development of the preimplantation embryo is largely incomplete. The goal of the present experiment was to identify candidates for this function. The approach was to assess expression patterns in the endometrium and oviduct of 93 genes encoding for hormones, growth factors, chemokines, cytokines, and WNT-related molecules. Results show that all of the genes were expressed in the reproductive tract. Expression in oviduct was affected by day of the estrous cycle for 21 genes with 11 genes having highest expression at estrus (CCL21, CTGF, CXCL10, CXCL16, DKK3, FGF10, IL18, IL33, IL34, PGF, and SFRP2), 1 gene at d 3 (WNT4), 8 at d 5 (BMP7, HGF, IL6, SFRP1, TGFB1, WIF1, WNT2, and WNT5A), and 1 at d 7 (IK). For endometrium, expression of 34 genes was affected by day of the estrous cycle with 11 having highest expression at d 0 (BMP7, CCL14, CCL21, CCL26, CTGF, CXCL12, IGF2, IL16, IL33, SFRP2, and WIF1), 2 at d 3 (HDGF, IL15), 14 at d 5 (CSF2, CX3CL1, CXCL3, FGF1, FGF2, GRO1, HGF, IGF1, IL1B, IL8, SFRP1, SFRP4, WNT5A, and WNT16), and 7 at d 7 (CXCL16, FGF13, HDGFRP2, TDGF1, VEGFB, WNT7A, and WNT11). Results are consistent with a set of genes regulated by estradiol early in the estrous cycle and another set regulated by progesterone later in the cycle. The cell-signaling genes identified here as being expressed in the oviduct and endometrium could serve to regulate early embryonic development in a stage-of-pregnancy-specific manner.