Chemical treatment on alumina–zirconia composites inducing apatite formation with maintained mechanical properties

Alumina–zirconia composites with submicrometric grain size were surface modified with the purpose to induce bioactivity using several chemical treatments. Among them, a quick attack by phosphoric acid induced on Zirconia Toughned Alumina (80–20 wt%) the formation of apatite-like calcium phosphate phases after immersion in simulated body fluid, indicating bioactivity induction. Such a treatment does not reduce the strength, hardness and ageing properties of this ceramic material, making it a suitable method for biomedical applications. Surface properties, topography and microstructure of oxide ceramics are also discussed.     

A diffusion model for the oxidation of hot pressed Si3N4-Y2O3-SiO2 materials

The parabolic oxidation behaviour of silicon nitride hot pressed from compositions of the Si₃N₄-Si₂N₂O-Y₂Si₂O₇ subsystem studied in 98 kPa air and 1273 to 1673 K has been discussed in terms of a diffusion model in which the most relevant parameters are the amount of the grain boundary phase, the width of the diffusion zone and the concentration gradient at the Si₃N₄/oxide reaction interface. The model accounts for both kinetic (oxidation rate constants) and thermodynamic (apparent activation energy for oxidation) variations with amount and composition of the grain boundary phase and proves suitable for the extension to other additive systems. The apparent activation energy for oxidation ranged from 260 to 623 kJ mol^–1 according to composition. It is suggested that a more appropriate evaluation of the thermodynamic parameters of the diffusion process must account for the variation of concentration profiles of the diffusing species with temperature.     

High-Temperature Resistant Composites in the AlN–SiC–MoSi2 System

Two fully dense composites containing AlN, SiC, and MoSi₂ in different amounts were produced by hot pressing. Young modulus, hardness, electrical conductivity, and thermal expansion coefficient were measured at room temperature. Strength and toughness were evaluated up to 1300°C in air. According to statistical analysis, the temperature has little or no effect on high-temperature fracture behavior of the composites. These electroconductive materials are suitable for thermomechanical applications at high temperature, the strength being about 600 MPa at 1300°C.     

Hemoglobin system of Sparus aurata: changes in fishes farmed under extreme conditions

In order to gain more knowledge on the stress responses of gilhead seabream (Sparus aurata) under extreme conditions, this study investigated the functional properties of the hemoglobin system and globin gene expression under hypoxia and low salinity. The oxygen affinity for the two hemoglobin components present inside the S. aurata erythrocyte was practically identical as was the influence of protons and organic phosphates (Root effect). The quantification of S. aurata hemoglobin fractions performed by HPLC and the data on gene expression of globin chains assayed by PCR indicate that under hypoxia and low salinity there is a change in the ratio between the two different hemoglobin components. The result indicating that the distinct hemoglobins present in S. aurata erythrocyte have almost identical functional properties, does not explain the adaptive response (expression change) following exposure of the animal to hypoxia or low salinity on the basis of their function as oxygen transporter. We hypothesize that other parallel biological functions that the hemoglobin molecule is known to display within the erythrocyte are involved in adaptive molecular mechanisms. The autoxidation-reduction cycle of hemoglobin could be involved in the response to particular living conditions.     

Evolutionary Catalyst Screening: Iridium‐Catalyzed Imine Hydrogenation

A high throughput catalyst screening is presented employing an evolutionary approach. The method comprises the optimization of initial leads by subjecting the catalysts to iterative rounds of optimization, including structural elaboration of the ligands by creating new focused libraries. Highly modular supramolecular ligands, robotized synthesis combined by high throughput experimentation creates a platform for fast catalyst development. An illustrative example for the asymmetric hydrogenation of cyclic 2,3,3‐trimethyl‐3H‐indole using iridium catalysts is presented. The kinetic investigation of the best catalyst yields an unusual second order in iridium, first order in hydrogen and zeroth order in substrate. Under optimized reaction conditions a TOF of 100 mol mol⁻¹ h⁻¹ with 96% ee could be obtained with the best catalyst. A full catalyst screening and kinetic study was conducted within a three‐week time‐frame.     

Anemia in relation to body mass index and waist circumference among chinese women

Background

This study aimed to investigate the relationship of anemia and body mass index among adult women in Jiangsu Province, China. Data were collected in a sub-national cross-sectional survey, and 1,537 women aged 20 years and above were included in the analyses. Subjects were classified by body mass index (BMI) categories as underweight, normal weight, overweight and obese according to the Chinese standard. Central obesity was defined as a waist circumference?≥?80 cm. Anemia was defined as hemoglobin concentration?<?12 g/dl. Prevalence ratios (PRs) of the relationship between anemia and BMI or waist circumference were calculated using Poisson regression.

Findings

Overall, 31.1% of the Chinese women were anemic. The prevalence of overweight, obesity and central obesity was 34.2%, 5.8% and 36.2%, respectively. The obese group had the highest concentrations of hemoglobin compared with other BMI groups. After adjustment for confounders, overweight and obese women had a lower PR for anemia (PR: 0.72, 95% CI: 0.62-0.89; PR: 0.59, 95% CI: 0.43-0.79). Central obesity was inversely associated with anemia.

Conclusion

In this Chinese population, women with overweight/obesity or central obesity were less likely to be anemic as compared to normal weight women. No measures are required currently to target anemia specifically for overweight and obese people in China.     

Processing and Properties of Ti(C,N)–WC-Based Materials

Two Ti(C,N)–WC powder mixtures, one containing 0.88 wt% Co and the other 6.2 wt% Ni + 2.9 wt% Co, were fabricated by different routes: pressureless and gas-pressure sintering in argon and nitrogen, and hot-pressing under vacuum. The microstructures of all the sintered samples consisted of grains with a core/rim structure, the core being Ti(C,N) and the rim (Ti,W)(C,N). An inner rim also was present at the core/rim interface. The more highly doped materials also had an intergranular Ni-Co-Ti-W binder phase. The compositions and cell parameters of the hard phases, as well as of the binder, were analyzed. The nitrogen partial pressure in the sintering furnace was the main factor that influenced grain growth and phase composition. In fact, sintering under argon enhanced grain growth and was accompanied by a lower tungsten content in the rim. The influence of the microstructure on some mechanical properties (hardness, flexural strength, toughness, and Young's modulus) also was investigated. Flexural-strength values up to 1550 MPa at room temperature and 1200 MPa at 800°C, and fracture-toughness values up to 8 MPa·m^1/2 were measured, depending on the starting composition and processing conditions.