The joint reaction of methanol and i-butane over the HZSM-5 zeolite

The effects of i-butane addition to methanol in MTP reaction were investigated over an in-house prepared HZSM-5 catalyst. It was observed that, propylene yield would be enhanced when i-butane fed to the reactor along with methanol. The rising growth of the propylene yield continued to peak on till the balance in thermal condition established. Similar trends have been observed when water was added to the mixture. The effect of WHSV with fixed water composition on product distribution was also studied. The optimum point where the highest amount of propylene yielded was shown to be high depended upon the temperature and residence time.     

A grouping-based global harmony search algorithm for modeling of proton exchange membrane fuel cell

In recent years, accurate identification of voltage versus current (V-I) characteristics of proton exchange membrane fuel cell (PEMFC) has attracted significant attention in the literature. However, the main drawback in accurate modeling is the lack of information about the precise values of the model parameters. In this paper, in order to overcome this drawback a grouping-based global harmony search algorithm, named GGHS, is proposed for parameter identification issue. The proposed algorithm attempts to provide an efficient way in which a new harmony can be properly improvised. In order to study the capability of the proposed algorithm, the results obtained by GGHS are compared with those obtained by two versions of harmony search (HS) algorithms, three versions of particle swarm optimization (PSO) algorithms, as well as seeker optimization algorithm (SOA). Simulation results accentuate the superiority of the GGHS over the other methods.     

Characterization of metal hydrides using pneumato-chemical impedance spectroscopy

Pneumato-chemical impedance spectroscopy (PIS) is a tool derived from electrochemical impedance spectroscopy (EIS). PIS can be used to analyze the kinetics of various solid-gas reactions, such as the hydriding kinetics of metals in the presence of hysteresis. Pneumato-chemical impedance diagrams are obtained from simple gas transfer experiments, using non-harmonic pressure perturbations. In single-phase domains, the global sorption mechanism consists of mainly two steps, a surface chemisorption step and a bulk hydrogen transport step, controlled by diffusion. In two-phase domains, an additional phase transformation step must be considered. Model impedances are obtained by interconnecting microscopic impedances associated with each reaction step. By fitting model impedances to the experimental ones, microscopic rate parameters such as the surface dissociation resistance, the bulk hydrogen diffusion coefficient and the phase transformation resistance can be obtained. Different results obtained on palladium, palladium–silver and LaNi₅ samples (foils and powder) are presented to illustrate the potentialities of this spectroscopy.     

Embedded benzocyclobutene in silicon: An integrated fabrication process for electrical and thermal isolation in MEMS

This paper reports a novel fabrication process to develop planarized isolated islands of benzocyclobutene (BCB) polymer embedded in a silicon substrate. Embedded BCB in silicon (EBiS) can be used as an alternative to silicon dioxide in fabrication of electrostatic micromotors, microgenerators, and other microelectromechanical devices. EBiS takes advantage of the low dielectric constant and thermal conductivity of BCB polymers to develop electrical and thermal isolation integrated in silicon. The process involves conventional microfabrication techniques such as photolithography, deep reactive ion etching, and chemical mechanical planarization (CMP). We have characterized CMP of BCB polymers in detail since CMP is a key step in EBiS process. Atomic force microscopy (AFM) and elipsometry of blanket BCB films before and after CMP show that higher polishing down force pressure and speed lead to higher removal rate at the expense of higher surface roughness, non-uniformity, and scratch density. This is expected since BCB is a softer material compared to inorganic films such as silicon dioxide. We have observed that as the cure temperature of BCB increases beyond 200 °C, the CMP removal rate decreases drastically. The results from optical microscopy, scanning electron microscopy, and optical profilometry show excellent planarized surfaces on the EBiS islands. An average step height reduction of more than 95% was achieved after two BCB deposition and three CMP steps.     

Predicting the stages of smoking acquisition in the male students of Shiraz's high schools, 2003.

A staged model of smoking adoption has been widely applied in studies of adolescent smoking. This paper examined the effects of socioenvironmental and personal factors on three stages of the smoking continuum among a sample of 10th-grade male students, ages 14-19 years, at 20 high schools in Shiraz city. This paper is the first step of a longitudinal study related to adolescents smoking and predictors of transition in the stages. A self-administered questionnaire was distributed to 1,132 10th-grade students from a possible population of 14,000 students. Multivariate discriminant function analysis was used to analyze the data. Overall 19.4% of students had smoked; 80.6%, 16.9%, and 2.5% had never smoked, had experimented, and had regularly smoked, respectively. The discriminant function analysis indicated that attitude toward smoking, use of alcohol, use of illicit drugs, smoking behavior of best friends, and self-esteem were related to more intense smoking behaviors. Finally, these variables permitted the correct classification of 70.3% of students into the stages of smoking acquisition. This finding has important public health significance, but further research is required to determine if the association is causal.     

Network model for the viscoelastic behavior of polymer nanocomposites

A theoretical network model reproducing some significant features of the viscoelastic behavior of unentangled polymer melts reinforced with well dispersed non-agglomerated nanoparticles is presented. Nanocomposites with low filler volume fraction (∼10%) and strong polymer-filler interactions are considered. The model is calibrated based on results obtained from discrete simulations of the equilibrium molecular structure of the material. This analysis provides the statistics of the network of chains connecting fillers, of dangling strands having one end adsorbed onto fillers, and that of the population of loops surrounding each nanoparticle. The network kinetics depends on the attachment-detachment dynamics of grafted chains of various types and is modeled by using a set of convection equations for the probability distribution functions. The overall viscoelastic response depends strongly on the lifetime of the polymer-filler junctions. The largest reinforcement is observed at low strain rates and low frequency oscillations. A solid like behavior is predicted for systems in which the polymer molecules interact strongly with the nanoparticles, effect which is associated with the behavior of the network of bridging segments.     

Correlation of H2S solubility in aqueous MDEA solutions using electrolyte-modified Peng-Robinson plus association equation of state

In this survey, we use the emPR-CPA equation of state to model a ternary system of H₂S solubility in MDEA aqueous solution at different solution compositions, temperatures, pressures, and acid gas loadings. For electrolyte part of the model, MSA theory and the Born term were used. There were 302 experimental data used in this work. To model a ternary system, at first pure components, then binary subsystems, and finally ternary system were modeled using a reactive bubble point pressure calculation method. An overall absolute average deviation percentage equal to 20.85 was achieved so that show the model efficiency for correlation of such systems.     

Effect of temperature on geosynthetic rutting performance in asphalt pavement

In this research study, a 3D finite element model using ABAQUS software is used to evaluate the rutting performance of reinforced asphalt pavement. In this research study, the effects of three types of geosynthetic layers on the optimum location are studied at temperatures of 20°C, 40°C, and 50°C. According to the model analysis, the middle of asphalt layer is determined as the optimized location of geosynthetic layers in the pavement structure. The results showed that the effect of geosynthetic layers on rutting performance increased with increasing elastic modulus of geosynthetic at high temperature of pavement.     

Transfer of Ultrafine Particles and Air in Multi-storey Buildings

An emerging issue in Denmark is passive smoking in residential buildings where non-smokers are exposed to smoke from their neighbours. There are various ways that smoke is transferred from one flat to another. The air transfer rate between two flats in a multi-storey building depends on its construction, tightness and age. This paper presents results of a study on the transfer of ultrafine particles and tracer gas in an older multi-storey building in Copenhagen. The aim of the study was to quantify the transfer ofultrafine particles and gases from one flat to another fiat before and after sealing the floor. A new floor-sealing method was applied to seal the floor between the two flats. The sealing method was developed by a firm specialising in sealing. Indoor ultrafine particle concentrations and tracer gas were measured continuously in the two fiats during the measuring periods. In the unoccupied fiat, the gas source was N20 and the particle source was burning cigarettes. Reduction of the concentration of ultrafine particles and tracer gas by sealing the floor with polyethylene and joint filler made of bitumen was studied. It was evaluated how the sealing performed with regard to decreasing the amount of ultrafine particles and a tracer gas transferred between two fiats separated by a floor. When the floor between the flats was not sealed, the results showed that about 4% of the ultraflne particles and 14% of the tracer gas were transferred. After sealing, the amount transferred was reduced to 1.6% and 5%, respectively.