Red Blood Cell Morphodynamics in Patients with Polycythemia Vera and Stroke

Polycythemia vera (PV) is a Ph-negative myeloproliferative neoplasm (MPN) which is characterized by erythrocytosis and a high incidence of thrombotic complications, including stroke. The study aimed to evaluate red blood cell (RBC) morphodynamic properties in PV patients and their possible association with stroke. We enrolled 48 patients with PV in this cross-sectional study, 13 of which have a history of ischemic stroke. The control group consisted of 90 healthy subjects. RBC deformability and aggregation analysis were performed using a laser-assisted optical rotational red cell analyzer. The following parameters were calculated: aggregation amplitude (Amp), RBC rouleaux formation time constant (Tf), time of formation of three-dimensional aggregates (Ts), aggregation index (AI), rate of complete disaggregation (y-dis), and the maximal elongation of RBC (EImax). Statistical analysis was performed with the R programming language. There were significant differences in RBCs morphodynamics features between patients with PV and the control group. Lower EImax (0.47 (0.44; 0.51) vs. 0.51 (0.47; 0.54), p < 0.001) and γ-dis (100 (100; 140) vs. 140 (106; 188) s⁻¹, p < 0.001) along with higher amplitude (10.1 (8.6; 12.2) vs. 7.7 (6.6; 9.2), p < 0.001) was seen in patients with PV compared with control. A statistically significant difference between PV patients with and without stroke in aggregation amplitude was found (p = 0.03). A logistic regression model for stroke was built based on RBC morphodynamics which performed reasonably well (p = 0.01). RBC alterations may be associated with overt cerebrovascular disease in PV, suggesting a possible link between erythrocyte morphodynamics and increased risk of stroke.     

Electron beam synthesis and characterization of poly(vinyl alcohol)/montmorillonite nanocomposites

Poly(vinyl alcohol) (PVA)/montmorillonite clay (MMT) nanocomposites in the form of films were prepared under the effect of electron beam irradiation. The PVA/MMT nanocomposites gels were characterized by X‐ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and mechanical measurements. The study showed that the appropriate dose of electron beam irradiation to achieve homogeneous nanocomposites films and highest gel formation was 20 kGy. The introduction of MMT (up to 4 wt %) results in improvement in tensile strength, elongation at break, and thermal stability of the PVA matrix. In addition, the intercalation of PVA with the MMT clay leads to an impressive improved water resistance, indicating that the clay is well dispersed within the polymer matrix. Meanwhile, it was proved that the intercalation has no effect on the metal uptake capability of PVA as determined by a method based on the color measurements. XRD patterns and SEM micrographs suggest the coexistence of exfoliated intercalated MMT layers over the studied MMT contents. The DSC thermograms showed clearly that the intercalation of PVA polymer with these levels of MMT has no influence on the melting transitions; however, the glass transition temperature (T_g) for PVA was completely disappeared, even at low levels of MMT clay. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1129–1138, 2006     

Sulphide inhibition of methanogenic activity at various pH levels at 55°C

The purpose of this study was to evaluate the toxic effect of sulphide on thermophilic methanogenic bacteria, pre-cultivated in UASB-reactors fed with and without sulphate, at 55°C and different pH levels. For granular sludge, precultivated in the presence of sulphate, the inhibition caused by hydrogen sulphide was dependent on the pH imposed. At alkaline pH the inhibitory effect of hydrogen sulphide was higher than at neutral or acidic pH. The effect of sulphide could not be described in terms of free hydrogen sulphide level only. For dispersed sludge, pre-cultivated in the absence of sulphate, the inhibition caused by free hydrogen sulphide was independent of the pH, and the toxic effect of sulphide could be described in terms of free hydrogen sulphide.     

Konzeption einer Kollaborationsplattform für die zwischenbetriebliche Softwareerstellung

The development of business application software is increasingly based on the development of different components by various suppliers. In the next step, system vendors integrate these components. Hereby, inter-organizational collaboration becomes more and more important for the software industry. In order to strengthen the value-added processes within these established software supply chains, the Ministry of Economic Affairs in Baden-Württemberg funded the project TASK that aims at fostering inter-organizational design, integration, and implementation of software components. The present article on the one hand provides an insight into the structure as well as the progress of this project and, on the other hand, presents academic research results in terms of an empirical analysis of barriers and drivers of interorganizational collaboration and of the purposeful design of a collaboration platform. The article concludes with a summary and a discussion of current and upcoming issues in establishing and sustaining inter-organizational collaboration structures within the software industry.     

A control synthesis approach for time discrete event systems

In this paper, we introduce a control synthesis method for discrete event systems whose behavior is dependent on explicit values of time. Our goal is to control the occurrence dates of the controllable events so that the functioning of the system respects given specifications. The system to be controlled is modeled by a time Petri net. In a previous work we proposed a systematic method to build the timed automaton which models the exact behavior of a time Petri net. Furthermore, the forbidden behaviors of the system are modeled by forbidden timed automaton locations. This paper focuses on the control synthesis method, which consists in computing new firing conditions for the timed automaton transitions so that the forbidden locations are no longer reachable.     

Effect of Refractory Boride Particles on Crystallization of the Amorphous Alloy Fe85B15

We have studied the characteristic features of the process of transition from the amorphous to the crystalline state in the presence of refractory boride particles of different crystallographic types (zirconium diboride ZrB₂ and lanthanum hexaboride LaB₆), introduced into ribbons of Fe₈₅B₁₅ amorphous alloy directly during ribbon formation. ZrB₂ particles in the base alloy have practically no effect on its thermal stability, defined by the temperature of onset of formation of primary α-Fe crystals, while in the presence of LaB₆ particles the thermal stability is considerably reduced. This qualitatively correlates with the Dankov principle of structural and dimensional correspondence considered in the theory of heterogeneous nucleation. We have shown that the major factor determining the high catalytic activity of LaB₆ particles with respect to nucleation of α-Fe crystallization centers is rapid chemical reaction within the zone where they come in contact with the Fe₈₅B₁₅ melt. The ZrB₂ particles which do not enter into such a reaction, do not affect the course of crystallization processes and the thermal stability of the base amorphous alloy.     

Surface micromorphology of dental composites [CE‐TZP]‐[Al2O3] with Ca+2 modifier

The objective of this study was to characterize the three‐dimensional (3D) surface micromorphology of the ceramics produced from nanoparticles of alumina and tetragonal zirconia (t‐ZrO₂) with addition of Ca⁺² for sintering improvement. The 3D surface roughness of samples was studied by atomic force microscopy (AFM), fractal analysis of the 3D AFM‐images, and statistical analysis of surface roughness parameters. Cube counting method, based on the linear interpolation type, applied for AFM data was used for fractal analysis. The morphology of non‐modified ceramic sample was characterized by the rather big (1–2 μm) grains of α‐Al₂O₃ phase with a habit close to hexagonal drowned in solid solution of t‐ZrO₂ with smooth surface. The pattern surfaces of modified composite content a little amount of elongated prismatic grains with composition close to the phase of СаСеAl₃О₇ as well as hexahedral α‐Al₂O₃‐grains. Fractal dimension, D, as well as height values distribution have been determined for the surfaces of the samples with and without modifying. It can be concluded that the smoothest surface is of the modified samples with Ca⁺² modifier but the most regular one is of the non‐modified samples. A connection was observed between the surface morphology and the physical properties as assessed in previous works. Microsc. Res. Tech. 78:840–846, 2015. © 2015 Wiley Periodicals, Inc.     

Point-of-care device for quantification of bilirubin in skin tissue

Steady state diffuse reflectance spectroscopy is a nondestructive method for obtaining biochemical and physiological information from skin tissue. In medical conditions such as neonatal jaundice excess bilirubin in the blood stream diffuses into the surrounding tissue leading to a yellowing of the skin. Diffuse reflectance measurement of the skin tissue can provide real time assessment of the progression of a disease or a medical condition. Here we present a noninvasive point-of-care system that utilizes diffuse reflectance spectroscopy to quantifying bilirubin from skin reflectance spectra. The device consists of an optical system integrated with a signal processing algorithm. The device is then used as a platform to study two different spectral databases. The first spectral database is a jaundice animal model in which the jaundice reflectance spectra are synthesized from normal skin. The second spectral database is the spectral measurements collected on human volunteers to quantify the different chromophores and other physical properties of the tissue such as Hematocrit, Hemoglobin, etc. The initial trials from each of these spectral databases have laid the foundation to verify the performance of this bilirubin quantification device.     

Impact of peroxydisulfate in the presence of zero valent iron on the oxidation of cyclohexanoic Acid and naphthenic acids from oil sands process-affected water

Large volumes of oil sands process-affected water (OSPW) are produced during the extraction of bitumen from oil sands in Alberta, Canada. The degradation of a model naphthenic acid, cyclohexanoic acid (CHA), and real naphthenic acids (NAs) from OSPW were investigated in the presence of peroxydisulfate (S(2)O(8)(2-)) and zerovalent iron (ZVI). For the model compound CHA (50 mg/L), in the presence of ZVI and 500 mg/L S(2)O(8)(2-), the concentration decreased by 45% after 6 days of treatment at 20 °C, whereas at 40, 60, and 80 °C the concentration decreased by 20, 45 and 90%, respectively, after 2 h of treatment. The formation of chloro-CHA was observed during ZVI/S(2)O(8)(2-) treatment of CHA in the presence of chloride. For OSPW NAs, in the presence of ZVI alone, a 50% removal of NAs was observed after 6 days of exposure at 20 °C. The addition of 100 mg/L S(2)O(8)(2-) to the solution increased the removal of OSPW NAs from 50 to 90%. In absence of ZVI, a complete NAs removal from OSPW was observed in presence of 2000 mg/L S(2)O(8)(2-) at 80 °C. The addition of ZVI increased the efficiency of NAs oxidation by S(2)O(8)(2-) near room temperature. Thus, ZVI/S(2)O(8)(2-) process was found to be a viable option for accelerating the degradation of NAs present in OSPW.     

Production of butanol and polyhydroxyalkanoate from industrial waste by Clostridium beijerinckii ASU10

This study demonstrated a biotechnological approach for simultaneous production of low‐cost H₂, liquid biofuels, and polyhydroxyalkanoates (PHAs) by solventogenic bacterium (Clostridium beijerinckii) from renewable industrial wastes such as molasses and crude glycerol. C beijerinckii ASU10 (KF372577) exhibited considerable performance for hydrogen production of 5.1 ± 0.84 and 11 ± 0.44 mL H₂ h^?1 on glycerol and sugarcane molasses, respectively. The total acetone‐butanol‐ethanol (ABE) generation from glycerol and molasses was 9.334 ± 2.98 and 10.831 ± 4.1 g L^?1, respectively. ABE productivity (g L^?1 h^?1) was 0.0486 and 0.0564 with a yield rate (g g^?1) up to 0.508 and 0.493 from glycerol and molasses fermentation, respectively. The PHA yields from glycerol and sugarcane molasses were 84.37% and 37.97% of the dried bacterial biomass, respectively. Additionally, the ultrathin section of C beijerinckii ASU10 showed that PHA granules were accumulated more densely on glycerol than molasses. Gas chromatography–mass spectrometry (GC‐MS) analysis confirmed that the PHAs obtained from molasses fermentation included 3‐hydroxybutyrate (47.3%) and 3‐hydroxyoctanoate (52.7%) as the main constituents. Meanwhile, 3‐hydroxybutyrate represented the sole monomer of PHA produced from glycerol fermentation. This study demonstrated that C beijerinckii ASU10 (KF372577) is a potent strain for low‐cost PHA production depending on its high potential to produce high‐energy biofuel and other valuable compounds from utilization of organic waste materials.