Coefficient of Friction Measurements for Thermoplastics and Fibre Composites Under Low Sliding Velocity and High Pressure

Friction materials for typical brake applications are normally designed considering thermal stability as the major performance criterion. There are, however, brake applications with very limited sliding velocities, where the generated heat is insignificant. In such cases it is possible that friction materials which are untypical for brake applications, like thermoplastics and fibre composites, can offer superior performance in terms of braking torque, wear resistance and cost than typical brake linings. In this paper coefficient of friction measurements for various thermoplastic and fibre composite materials running against a steel surface are presented. All tests were carried out on a pin-on-disc test-rig in reciprocating operation at a fixed sliding speed and various pressure levels for both dry and grease lubricated conditions. Moreover, a generic theoretical framework is introduced in order to interpret the changes of friction observed during the running-in phase.     

How do the plants used in phytoremediation in constructed wetlands,a sustainable remediation strategy,perform in heavy‐metal‐contaminated mine sites?

This review draws on knowledge for the treatment of heavy‐metal leachate in contaminated mine sites. Mine waste rock dumps and tailings generate a continuous stream of metalliferous and saline leachate over the long term. The mining industry has many legacy sites, which have compromised aquatic ecosystems and groundwater because of heavy‐metal contamination. Chemical and engineering methods are available and have been extensively utilised. However, these methods require intensive energy and often produce substantial volumes of secondary waste. We therefore argue in favour of phytoremediation as a sustainable remediation strategy leading towards efficient and sustainable metal removal and immobilisation through constructed wetlands.     

Metabolic profile biomarkers of metal contamination in a sentinel terrestrial species are applicable across multiple sites

In this study, we addressed the question of whether an omic approach could genuinely be useful for biomarker profile analysis across different field sites with different physicochemical characteristics. We collected earthworms (Lumbricus rubellus) from seven sites with very different levels of metal contamination and prevailing soil type and analyzed tissue extracts by 1H nuclear magnetic resonance spectroscopy. Pattern recognition analysis of the data showed that both site- and contaminant-specific effects on the metabolic profiles could be discerned. Zinc was identified as the probable major contaminant causing a metabolic change in the earthworms. Individual sites could be resolved on the basis of NMR spectral profiles by principal component analysis; these site differences may also have been caused by additional abiotic factors such as soil pH. Despite an inevitable degree of confounding between site and contaminant concentrations, it was possible to identify metabolites which were correlated with zinc across all different sites. This study therefore acts as a proof of principle for the use of NMR-based metabolic profiling as a diagnostic tool for ecotoxicological research in polluted field soils.     

Novel aromatic macrocyclic oligomers: intermediates for the preparation of high-performance polymers

Recent studies aimed at the development of macrocyclic oligomers as the intermediates for the preparation of high-performance polymers are reviewed. Efficient methods for the preparation of a range of cyclic oligomers, such as aryl ether ketones, aryl ether phthalazines, aryl ether isoquinolines, aryl ether phthalazinones, and arylene sulfides, have been developed. Cyclization was achieved via a nucleophilic aromatic substitution reaction under high-dilution conditions. The cyclic aryl ether oligomers undergo a facile ring-opening polymerization to form high molecular weight polymer. Cyclic oligomers containing an aromatic sulfide linkage also undergo a facile free-radical ring-opening polymerization to form high molecular weight polymers which can be amorphous or crystalline. Due to their low molecular weights, these cyclic oligomers have very low melt viscosities which makes them attractive intermediates for a variety of applications for which the conventionally prepared high molecular weight polymers would not be suitable.     

Flux measurements for a DD neutron generator using neutron activation analysis

The fast and maximum thermal neutron fluxes from the DD-109 neutron generator at the University of Sharjah were experimentally measured by the activation technique using different neutron reactions. The thermal and fast neutron fluxes were found to be 2.960 × 10~6 and6.186 × 10~7 n/cm~2 s, respectively. This was done to verify the modeling results for the optimum moderator thickness needed to maximize the thermal neutron flux. The optimum moderator thickness was found to be between 3.5 and4 cm. The present data were compared with the detailed MCNP model-based calculation performed in earlier work to simulate the generator.     

Mundane aesthetics.

With the publication of Zür experimentalen ?sthetik (1871) and Vorschule der ?sthetik (1876), Fechner laid the foundations for a new field termed experimental aesthetics, and provided three methods for empirical research. Of these, the method of choice has dominated subsequent research. It is argued that this method, in combination with a narrow, post-Baumgarten definition of aesthetics as pertaining mainly to the experience of art, has not served aesthetics well. In so doing it has overlooked the vast corpus of everyday objects for which people engage in aesthetic choice. Termed mundane aesthetics, this represents the low end, design, as distinct from the high end, art. The aesthetics of the mundane represents everyday reality, far removed from the rarefied pursuit of art. A study is reported into that most mundane and ubiquitous activity, selecting a paint color for the home. It eschews the laboratory and, instead, uses a retrospective method supported by qualitative data analysis (NVivo). The results indicate that aesthetic choice involves processes that are far from uniform, far from instantaneous (cf. laboratory studies), and that employ both internal and external aids reflecting cognitive, emotional, and social considerations. Selecting a wall color emerges as a surprisingly sophisticated process and, on the basis of the present study, one that women appear better equipped to perform than men. A parallel is drawn with the domain of decision research, particularly naturalistic decision-making. Mundane aesthetics involves a decision process, and not simply an affective choice. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Atomic force microscopy as a nanoscience tool in rational food design

Atomic force microscopy (AFM) is a nanoscience tool that has been used to provide new information on the molecular structure of food materials. As an imaging tool it has led to solutions to previously intractable problems in food science. This type of information can provide a basis for tailoring food structures to optimise functional behaviour. Such an approach will be illustrated by indicating how a basic understanding of the role of interfacial stability in complex foods systems can be extended to understand how such interfacial structures behave on digestion, and how this in turn suggests routes for the rational design of processed food structures to modify lipolysis and control fat intake. As a force transducer AFM can be used to probe interactions between food structures such as emulsion droplets at the colloidal level. This use of force spectroscopy will be illustrated through showing how it allows the effect of the structural modification of interfacial structures on colloidal interactions to be probed in model emulsion systems. Direct studies on interactions between colliding soft, deformable droplets reveal new types of interactions unique to deformable particles that can be exploited to manipulate the behaviour of processed or natural emulsion structures involved in digestion processes. Force spectroscopy can be adapted to probe specific intermolecular interactions, and this application of the technique will be illustrated through its use to test molecular hypotheses for the bioactivity of modified pectin molecules. Copyright © 2011 Society of Chemical Industry     

The mountain bike — the dream machine?

This paper examines the development of recreation on mountain bikes, since they were introduced in 1983. It considers some of the social conflicts that have reportedly arisen and then presents the results of a user survey undertaken in 1992. This provides a profile of mountain bike use and users. The aim of the study is to provide landscape managers, planners etc., with basic information about this latest form of countryside recreation so as to encourage more effective provision and management.