Application of chemical equilibrium for hydrocarbon isomerization analysis

Isomerization is used in refining industry to upgrade gasoline. Since it is an important process, it is desirable to analyze the reactions that take place in the process. In this paper, the isomerization of a mixture of hydrocarbons was modeled by solving the chemical equilibrium of the system. A direct application of the chemical equilibrium solution cannot reproduce experimental results. However, when some of the system reactions are molar extent limited, the solution can reproduce published experimental data.     

Description of Microstructural Changes in Wheat Flour and Flour Components during Hydration by using Environmental Scanning Electron Microscopy

The initial microstructures of two wheat flours (hard wheat flour and soft wheat flour) and flour components (starch, gluten, soluble pentosans and insoluble pentosans) were observed by scanning electron microscopy (SEM) and the changes in microstructure during hydration were described using environmental SEM (ESEM). SEM images permitted observation of the classical microstructure of wheat flour particles and starch granules. The initial microstructure of the purified fractions of flour components (gluten, soluble pentosans and insoluble pentosans) seemed largely dependent on the purification techniques, and could not thus directly be used to describe their in situ behavior during flour processing. ESEM observations of wheat flours and flour components during hydration first demonstrated slight changes in surface of particles that we associated to apparent swelling effects. The formation of a continuous aqueous phase between particles was observed for long hydration times.     

Sorption of copper (II) ions by pine sawdust

The sawdust of Calabrian pine was used as sorbent for the removal of Cu(II) ions from aqueous solution of copper sulfate pentahydrate (CuSO₄.5H₂O) at different concentrations, pHs and temperatures. The results showed that about 65–81% of Cu(II) ions in the solution could be adsorbed on the sawdust. The percentage of adsorped Cu(II) ions onto the sawdust increased with increasing initial concentration. Kinetic studies indicated that the sorption process followed the first order reversible kinetic model. It was also determined that the sorption process obeyed the Freundlich isotherm. Furthermore, the sorption thermodynamic was investigated in detail.     

Effect of montmorillonite clay addition on the morphological and physical properties of Jatropha curcas L. and Glycine max L. protein concentrate films

Protein concentrates from jatropha (JPC) and soy seeds (SPC) were obtained by solubilization and acid precipitation of proteins. JPC and SPC films were prepared by the casting method, using two different montmorillonite (MMT) clay concentrations and plasticized with glycerol. Film properties were evaluated by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared spectroscopy, thermogravimetric analysis, tensile properties, water retention, and water vapor transmission rate (WVRT). Typical tactoid microcomposite structures were found to be heterogeneously dispersed in the films containing MMT. A small XRD peak was found in films with MMT. Slight improvements in thermal stability and tensile strength were observed in the films with MMT. Reductions in water retention and WVRT were obtained when MMT was added into the films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44459.     

Virtual Screening of FDA-Approved Drugs against Triose Phosphate Isomerase from Entamoeba histolytica and Giardia lamblia Identifies Inhibitors of Their Trophozoite Growth Phase

Infectious diseases caused by intestinal protozoan, such as Entamoeba histolytica (E. histolytica) and Giardia lamblia (G. lamblia) are a worldwide public health issue. They affect more than 70 million people every year. They colonize intestines causing primarily diarrhea; nevertheless, these infections can lead to more serious complications. The treatment of choice, metronidazole, is in doubt due to adverse effects and resistance. Therefore, there is a need for new compounds against these parasites. In this work, a structure-based virtual screening of FDA-approved drugs was performed to identify compounds with antiprotozoal activity. The glycolytic enzyme triosephosphate isomerase, present in both E. histolytica and G. lamblia, was used as the drug target. The compounds with the best average docking score on both structures were selected for the in vitro evaluation. Three compounds, chlorhexidine, tolcapone, and imatinib, were capable of inhibit growth on G. lamblia trophozoites (0.05–4.935 μg/mL), while folic acid showed activity against E. histolytica (0.186 μg/mL) and G. lamblia (5.342 μg/mL).     

Evaluation of modified moore swabs and continuous flow centrifugation for concentration of Salmonella and Escherichia coli O157:H7 from large volumes of water

Modified Moore swabs (MMS; consisting of a polyvinyl chloride cartridge filled with gauze) capture microorganisms within the packed gauze as water flows through the cartridge, while continuous flow centrifugation (CFC) uses centrifugation to sediment the microorganisms while water continuously flows in the system. This study evaluated and compared the efficacy of MMS and CFC for concentration and subsequent detection of Escherichia coli O157:H7 and Salmonella from large volumes of water (10 liters). Water samples were spiked at levels of 10(1), 10(2), 10(3), and 10(4) CFU/100 ml with three-strain cocktails of either E. coli O157:H7 or Salmonella serovars, which had been previously transformed with a plasmid to express resistance to ampicillin as well as green, red, or cyan fluorescent proteins. Plating was performed before and after concentration on tryptic soy agar supplemented with ampicillin in order to quantitate the concentration efficiencies of each method. The two lowest spiking levels were also enriched in low volumes of tryptic soy broth supplemented with ampicillin followed by testing via lateral flow devices. Significant (P < 0.05) concentrations of initial levels of E. coli O157:H7 in the range of 0.7 to 1.0 and 1.2 to 1.4 log were achieved within approximately 35 min of processing time via MMS and CFC, respectively. Similarly, significant (P < 0.05) concentrations were also achieved for Salmonella with 0.9 to 1.2 and 1.2 to 1.4 log concentration for MMS and CFC, respectively. There were no statistical differences (P > 0.05) between the two concentration methods in their ability to concentrate either of the two target bacteria. Significantly (P > 0.05) more spiked samples were detected by lateral flow devices following concentration and enrichment than for nonconcentrated, enriched samples. It is concluded that both MMS and CFC have potential to be used to enhance the sensitivity of downstream bacterial detection methods used to test irrigation water for the presence of foodborne pathogens.     

Low-temperature (7 °C) anaerobic treatment of a trichloroethylene-contaminated wastewater: microbial community development

The feasibility of low-temperature (7 °C) anaerobic digestion for the treatment of a trichloroethylene (TCE) contaminated wastewater was investigated. Two expanded granular sludge bed (EGSB) bioreactors (R1 and R2) were employed for the mineralisation of a synthetic volatile fatty acid based wastewater at an initial organic loading rate (OLR) of 3 kg COD m⁻³ d⁻¹, and an operating temperature of 15 °C. Successive reductions in OLR to 0.75 kg COD m⁻³ d⁻¹, and operational temperature to 7 °C, resulted in stable bioreactor operation by day 417, with COD removal efficiency and biogas CH₄ content ≥74%, for both bioreactors. Subsequently, the influent to R1 was supplemented with increasing concentrations (10, 20, 30 mg l⁻¹) of TCE, while R2 acted as a control. At an influent TCE concentration of 30 mg l⁻¹, although phase average TCE removal rates of 79% were recorded, a sustained decrease in R1 performance was observed, with COD removal of 6%, and % biogas CH₄ of 3% recorded on days 595 and 607, respectively. Specific methanogenic activity (SMA) assays identified a general shift from acetate- to hydrogen-mediated methanogenesis in both R1 and R2 biomass, while toxicity assays confirmed an increased sensitivity of the acetoclastic community in R1 to TCE and dichloroethylene (DCE), which contributed to acetate accumulation. Quantitative Polymerase Chain Reaction (qPCR) analysis of the methanogenic community confirmed the dominance of hydrogenotrophic methanogens in both R1 and R2, representing 71-89% of the total methanogenic population, however acetoclastic Methanosaeta were the dominant organisms, based on 16S rRNA gene clone library analysis of reactor biomass. The greatest change in the bacterial community, as demonstrated by UPGMA analysis of DGGE banding profiles, was observed in R1 biomass between days 417 and 609, although 88% similarity was retained between these sampling points.     

A technique for defining agent-oriented engineering processes with tool support

The formalization of engineering processes is necessary for guaranteeing the quality and cost of the products involved. Agent-oriented engineering has already proposed development processes that still need to be further formalized to be applicable by non-researchers. This paper proposes a technique to instantiate processes for specific agent-oriented methodologies. This technique is based on three orthogonal views that are respectively related with lifecycles, disciplines and guidances. In addition, processes are modeled with a tool, which is automatically generated from a process metamodel inspired by the software & systems process engineering metamodel. Accordingly, engineers can choose the methodology–process pair best-suited for the characteristics of their project. The paper illustrates the approach based on the unified development process and the scrum process for the INGENIAS methodology and compares the results with other existing alternatives.