“Technically Unavoidable” in Terms of Genetically Modified Organisms – an Approach for Food Control

In case of findings of authorized genetically modified (gm) plant ingredients below the 0.9 per cent threshold, exceptions from labelling requirements according to regulation (EC) No. 1829/2003 can only be made, “provided that this presence is adventitious or technically unavoidable”. The authors describe factors that should be considered regarding contaminations by gm plant ingredients as technically unavoidable or not. A practical approach for interpretation, taking into account quality control measures and documentation as well as present findings in comparable products is proposed. Received: February 23, 2007     

Praxisorientierte Raffination von Stahlschmelzen mit Seltenerdmetallen

Simulation eines pfannenmetallurgischen Stahlraffinationsverfahrens unter Verwendung von Cer-Mischmetall, einer Raffinationsschlacke und Argonspülung zur Reinheitsgradverbesserung. Darstellung typischer nichtmetallischer Einschlüsse. Aufzeigen der erzielten Zähigkeitsverbesserungen und der Verringerung der Zähigkeitsanisotropie.     

Analysis of the temperature dependence of the fracture stress of sharp notched bending specimens of a structural steel with respect to intermediate transitions

The flow and fracture stresses, σ_y^g and σ_f^g (δ = crack tip displacement), of sharply notched bending specimens of a structural steel U St 37-1 are measured in the temperature range from full scale to small scale yielding. The best adaption of the experimental results for σ_f^g is obtained by a curve which exhibits an intermediate transition, i.e. which follows in a temperature range between an upper, T_tM¹ and a lower, T_tl¹, transition temperature to the curve σ_y^g(T) for the flow stress with a constant δ = δ₁. This transition corresponds to that of the slip to the twin nucleated fracture. Two analyses [3,5] according to the local fracture stress, σ_f^*, concept show that the amount and the temperature dependence of σ_f^* are somewhat different for both methods, but that both exhibit an increase of σ_f^* in the transition range. It is concluded that each transition in the nucleation mode of the fracture is connected with such a transition in the fracture stress. It may, however, become indistinct or even be covered by the scatter of the experimental points.     

Correction of <Emphasis Type="Italic">B</Emphasis><Subscript>0</Subscript>-induced geometric distortion variations in prospective motion correction for 7T MRI

Objective

Prospective motion correction can effectively fix the imaging volume of interest. For large motion, this can lead to relative motion of coil sensitivities, distortions associated with imaging gradients and B ₀ field variations. This work accounts for the B ₀ field change due to subject movement, and proposes a method for correcting tissue magnetic susceptibility-related distortion in prospective motion correction.

Materials and methods

The B ₀ field shifts at the different head orientations were characterized. A volunteer performed large motion with prospective motion correction enabled. The acquired data were divided into multiple groups according to the object positions. The correction of B ₀-related distortion was applied to each group of data individually via augmented sensitivity encoding with additionally integrated gradient nonlinearity correction.

Results

The relative motion of the gradients, B ₀ field and coil sensitivities in prospective motion correction results in residual spatial distortion, blurring, and coil artifacts. These errors can be mitigated by the proposed method. Moreover, iterative conjugate gradient optimization with regularization provided superior results with smaller RMSE in comparison to standard conjugate gradient.

Conclusion

The combined correction of B ₀-related distortion and gradient nonlinearity leads to a reduction of residual motion artifacts in prospective motion correction data.

     

Short‐Term Morphology Relaxation of Thermoplastic Polyurethane Elastomers after Fast Strain Steps

Strain steps are applied to elastomers in a pneumatic relaxometer and monitored by small‐angle X‐ray scattering (SAXS). The relaxometer provides a rise time of 13 ms for strain pulses of step height Δε = ±1 in strain. The basic character of the 2D SAXS frames is examined and corresponding invariants Q(t) are analyzed. Three thermoplastic polyurethanes (TPU) of hardness 85 Shore A with different soft segments are studied both unannealed and annealed. The first response of all materials is a fast morphology conversion which finishes within t_mc =250 ms. Because it has been untraceable, it is characterized by a settling stroke Q(t_mc) ? Q(0). The second response is a slow morphology adjustment process which complies with logarithmic relaxation. It is characterized by a relaxation rate D_Q = Q(10 t)/Q(t) ? 1. Comparison indicates that the nanoscopic morphology relaxation processes appear to have little direct relation to the macroscopic stress relaxation curves. The materials differ with respect to hard‐domain morphology stability and morphology recovery. Most unstable is the morphology of the annealed polyether‐based material. It forms nanofibrillary entities when strained.     

Variation of poly(vinylidene fluoride) morphology due to radial cold flow in a flexible pipe

A subsea flexible pipe containing isotropic poly(vinylidene fluoride) (PVDF) layers is subjected to rapid decompression after being put in pressurized equilibrium with a fluid containing supercritical CO₂. The PVDF layers have flowed radially into gaps of adjacent metallic coils forming whitened noses. Microbeam small‐angle X‐ray scattering (SAXS) scanning reveals a considerable morphological gradient in the polymer layers. PVDF layers (inner: wear, outer: barrier) in two zones (undamaged and damaged) are scanned. Far from noses and damage zone, the samples are isotropic without voids. Their morphological parameters are determined and compared to virgin material. Approaching the noses, the structure turns into highly oriented microfibrils perpendicular to the local flow into the gaps. Here, voids extend parallel to the microfibrils. At edges of the metallic structure, they turn more perpendicular to the layer. Crystallite orientation extends out to both sides of the whitened nose regions, but in the undamaged samples, tilting of the orientation direction and void‐formation are restricted to the white regions: successive mechanisms of cold drawing are mapped into space. Under the damaged spot, voids and crystallite orientation extend through the entire layer. POLYM. ENG. SCI., 55:2869–2877, 2015. © 2015 Society of Plastics Engineers     

An Analysis of Public Clouds Elasticity in the Execution of Scientific Applications: a Survey

Elasticity can be seen as the ability of a system to increase or decrease the computing resources allocated in a dynamic and on demand way. It is an important feature provided by cloud computing, that has been widely used in web applications and is also gaining attention in the scientific community. Considering the possibilities of using elasticity in this context, a question arises: “Are the available public cloud solutions suitable to provide elasticity to scientific applications?” To answer the question, in a first moment we present a survey on the use of cloud computing in scientific scenarios, providing an overview of the subject. Next, we describe the elasticity mechanisms offered by major public cloud providers and analyzes the limitations of the solutions in providing elasticity for scientific applications. As the main contribution of the article, we also present an analysis over some initiatives that are being developed to overcome the current challenges. In our opinion, current computational clouds are developing rapidly but have not yet reached the necessary maturity level to meet all scientific applications elasticity requirements. We expect that in the coming years the efforts being taken by numerous researchers in this area identify and address these challenges and lead to better and more mature technologies that will improve cloud computing practices.     

The survey on ARM processors for HPC

The Journal of Supercomputing - The ongoing effort to reach the exascale computing barrier has led to a myriad of research and publications in the topic of alternative energy-efficient...