Combining molecular imprinted nanoparticles with surface plasmon resonance nanosensor for chloramphenicol detection in honey

The focus of this article is to develop a surface plasmon resonance (SPR) nanosensor to determine chloramphenicol (CAP) using the molecularly imprinted nanoparticles. The CAP imprinted nanoparticles were prepared by miniemulsion polymerization method. Then, the nanoparticles were attached onto the SPR nanosensor surface via temperature‐controlled evaporation. Surface characterization studies were performed with atomic force microscopy and contact angle measurements. Kinetic studies were performed with CAP solutions in the concentration range of 0.155–6.192 nM. Florphenicol (FLP) and thiamphenicol (TAP) having similar chemical structures to the template (i.e., CAP) were chosen as competitors to determine selectivity of the nanoparticles. Selectivity constants were observed as 8.86 for CAP/TAP and 8.36 for CAP/FLP. The detection limit was calculated as 40 ng/kg honey sample. In the light of these results, it was emphasized that the SPR nanosensor is able to recognize CAP selectively and has a potential for real‐time CAP detection in honey sample. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

High temperature bending creep behavior of a multi-cation doped α/β-SiAlON composite

SiAlON ceramics with high hardness and high toughness can be made through designing α/β-SiAlON composites. An important advantage of α-SiAlON phase is that the amount of intergranular phase is reduced by the transient liquid phase being absorbed into the matrix of α-SiAlON phase during sintering. But, the thermal stability of the α-SiAlON phase is an important concern for α/β-SiAlON composites especially at high temperatures. The use of different types of single or multiple cations during fabrication directly affects resultant microstructures and mechanical behavior of α/β-SiAlON composites. In this study, the creep behavior of a multi-cation (Y, Sm and Ca) doped α/β-SiAlON composite, in which aluminum-containing nitrogen melilite solid solution phase was designed as intergranular phase, was investigated by four-point bending creep tests under stresses from 50 to 150 MPa and at temperatures from 1300 °C to 1400 °C in air. The stress exponent was determined to be 1.6 ± 0.13 at 1400 °C and the creep activation energy was calculated to be 692 ± 37 kJ/mol⁻¹. Grain boundary sliding coupled with diffusion was identified as the rate-controlling creep mechanism for the α/β-SiAlON composite.     

Effect of heat treatment on the creep behavior of α/β SiAlON sintered with multication oxide sintering additives

SiAlONs are important materials for high-temperature applications and creep properties of SiAlONs are largely controlled by the amount and type of sintering additives. It has been established that heat treatment can reduce the amount of amorphous intergranular phase through crystallization. However, there is no study on the creep behavior of heat-treated SiAlON ceramics containing multication sintering additives. Therefore, the aim of the study was to investigate the effect of heat treatment on the creep properties of multication containing (Y-Sm-Ca oxides) α/β-SiAlON ceramics. The heat treatments of the sintered samples were carried out at 1600°C for 2 hours. The creep tests were carried out in the range 1300-1400°C under different loads (50-150 MPa). The existing phases and the microstructures of samples before and after creep were investigated using XRD and SEM techniques. It was found that heat treatment resulted in a better creep performance compared to as-sintered samples. The activation energy and stress exponent for heat-treated SiAlONs were also calculated as 708 ± 45 kJ/mol and 1.4, respectively. Compared to the sintered sample values, the results suggested that the acting creep mechanism of grain-boundary sliding and cavitation was reduced with the heat treatment.     

Magnetoresistance behaviour in CoFe/Cu multilayers: thin Cu layer effect

The magnetoresistance properties of the CoFe/Cu multilayers have been investigated as a function of thin non-magnetic Cu layer thickness (from 2.5 to 0.3 nm). CoFe/Cu multilayers were electrodeposited on Ti substrates from a single electrolyte containing their metal ions under potentiostatic control. The structural analysis of the films was made using X-ray diffraction. The peaks appeared at 2θ ≈ 44°, 51°, 74° and 90° are the main Bragg peaks of the multilayers, arising from the (111), (200), (220) and (311) planes of the face-centered cubic structure, respectively. The magnetic characterization was performed by using vibration sample magnetometer in magnetic fields up to ±1600 kA/m. At 0.6, 1.2 and 2.0 nm Cu layer thicknesses, the high saturation magnetization values were observed due to antiferromagnetic coupling of adjacent magnetic layers. Magnetoresistance measurements were carried out using the Van der Pauw method in magnetic fields up to ±1000 kA/m at room temperature. All multilayers exhibited giant magnetoresistance (GMR), and the similar trend in GMR values and GMR field sensitivity was observed depending on the Cu layer thickness.     

Coal consumption and industrial production nexus in USA: Cointegration with two unknown structural breaks and causality approaches

The paper investigates the causality relationships among industrial production index, coal consumption and employment in industrial sector for the period of 1973:1–2011:10 in USA. After noticing that there are breaks in the regression model, the Hatemi-J test for cointegration is employed to the cases that take into account two possible regime shifts. It is concluded that there is a long run relationship between industrial production and industrial coal consumption with the breaks at 1983:4 and 1998:4. We found a negative relationship between coal consumption and industrial production for the period of 1973:1–1983:4 and positive relationship for 1983:5–1998:4 period. For the last period that covers 1983:5–2011:10, the cointegration relationship turned to negative. In addition, the results show that causal relationship between coal consumption and industrial production changes over time.     

Wıreless Communıcatıons Beyond 5 g: Teraherzwaves,Nano-Communıcatıons and the Internet of Bıo-Nano-Thıngs

Two promising technologies cosidered for the Beyond 5G networks are the terahertz and nano-technologies. Besides other possible application areas they hold the commitment to numerous new nano-scale solutions in the biomedical field. Nano-technology, as the name implies, examines the construction and design of nano-sized materials. These two interconnected emerging technologies have the potential to find application in quite many areas, one of the most importan being healthcare. This overview paper discusses the specifics of these technologies, their most important characteristics and introduces some of the trends for their application in the healthcare sector. In the first section terahertz frequency radio waves and their specific properties depending on the surrounding environment are discussed, followed by an introduction to nano-scale communications. Terahertz waves mandate the use of nano-scale antennas, which in turn brings us to the concept of nano-scale nodes. Nano-scale nodes are units that can perform the most basic functions of nano-machines and inter-nano-machine communications, which allow distributed nano-machines to perform more complex functions. Beyond 5G the development of these nano-communications is expected to lead to the emergence of new complex network systems. In the second part of this paper the paradigms of the Internet of Nano Things, molecular commnications and the Internet of Bio-Nano Things are discussed followed by details on their integration in healthcare related applications. The main goal of the article is to provide an introduction to these intriguing issues discussing advanced nano-technology enablers for Beyond 5G networks such as terahertz and molecular communications, nano-communications between nano-machines and the Internet of Bio-Nano-Things in light of health related applications.

     

Neutronic study on the effect of first wall material thickness on tritium production and material damage in a fusion reactor

In this study, the effects of changing first wall materials and their thicknesses on a reactor were investigated to determine the displacement per atom（DPA） and gas production（helium and hydrogen） in the first wall, as well as the tritium breeding ratio（TBR） in the coolant and tritium breeding zones. Therefore, the modeling of the magnetic fusion reactor was determined based on the blanket parameters of the International Thermonuclear Experimental Reactor（ITER）. Stainless steel（SS 316 LNIG）, Oxi...     

Form-Stabilized Polyethylene Glycol/Palygorskite Composite Phase Change Material: Thermal Energy Storage Properties,Cycling Stability,and Thermal Durability

In this work, polyethylene glycol (PEG) as a phase change material (PCM) was incorporated with palygorskite (Pal) clay to develop a novel form-stable composite PCM (F-SCPCM). The Pal/PEG(40 wt%) composite was defined as F-SCPCM and characterized using SEM/EDS, FT-IR, XRD, DSC, and TGA techniques. The DSC results revealed that the F-SCPCM has a melting temperature of 32.5°C and latent heat capacity of 64.3 J/g for thermal energy storage (TES) applications. Thermal cycling test showed that the F-SCPCM had good cycling thermal/chemical stability after 500 cycles. The TGA data proved that that both cycled and non-cycled F-SCPCMs had considerable high thermal durability. Consequently, the created F-SCPCM could be considered as an additive material for production of green construction components with TES capability. POLYM. ENG. SCI., 60:909–916, 2020. © 2020 Society of Plastics Engineers     

Effect of a Small Amount of Synthetic Fiber on Performance of Biocarbon-Filled Nylon-Based Hybrid Biocomposites

Advanced hybrid biocomposites are engineered from nylon 6, waste wood biosourced carbon (biocarbon) with a low content of synthetic fiber for lightweight auto-parts uses. The novel engineering process through direct injection molding of only 2 wt% synthetic fibers in the form of masterbatch with 20 wt% biocarbon, results outstanding performance of the resulting nylon biocomposites. Such uniquely developed biocomposites show tensile strength of 105 MPa and tensile modulus of 5.14 GPa with a remarkable heat deflection temperature (HDT) of 206 °C. The direct injection molding of synthetic fiber retains the length ≈3 times higher as compared to traditional extrusion and injection molding; resulting greater degree of entanglement and composite reinforcement effectiveness in the hybrid biocomposites. Highly dimensionally stable nylon 6 biocomposites with a very low coefficient of linear thermal expansion results through reinforcing ability of the sustainable biocarbon and small amount of synthetic fiber.