Cold Plasma Modification Effects on the Water Flow through Sintered UHMWPE Membranes

Natural rubber latex and various concentration of natural antioxidant were blended in different ratios and irradiated at various absorbed doses by gamma rays from Co-60 source at room temperature. The aqueous extraction of Diospyros peregrina was used as natural antioxidant. It was found that the addition of different concentration of natural antioxidant into natural rubber latex improve the aging property of the film. Decreasing in tensile strength of rubber film with 10 phr natural antioxidant and 15 kGy radiation dose after 24 hours aging at 100°C was 9.34% compared to 13.89% for film without natural antioxidant. The tensile strength, tear resistance and modulus at 500% elongation of the rubber film were found to be optimum at 15 kGy radiation dose and with 10 phr natural antioxidant. Elongation at break, permanent set and swelling ratio decreases with the increasing absorbed radiation dose as well as the concentration of the natural antioxidant.     

Synthesis of new extended surfactants containing a carboxylate or sulfate polar group

New extended anionic surfactants with a carboxylate or sulfate polar head were synthesized from polypropoxylated alcohols, and their structures were confirmed by ¹H and ¹³C nuclear magnetic resonance analysis. The extended surfactant critical micelle concentration was found to decrease with the length of the polypropylene glycol spacer. Surfactants containing a diethylene glycol link to the head group exhibited a higher critical micelle concentration than did their nondiethoxylated homologs.     

Acid catalyst influence on the polymerization time of polyfurfuryl alcohol and on the porosity of monolithic vitreous carbon

This study compares the influence of different acid catalysts on the polymerization rate of polyfurfuryl alcohol (PFA) precursor and especially on the respective porosity of Monolithic Vitreous Carbon (MVC) produced from that. Five acid catalysts commonly used were compared: p‐toluenesulfonic (PTLS), hydrochloric, sulfuric, nitric, and phosphoric. A fixed molar concentration of catalyst was diluted in PFA resin under room pressure and temperature. The time dependence of PFA resin polymerization was investigated by optical transmittance of PFA films, and the polymerization degree, characterized by ATR spectroscopy and thermogravimetry. MVC samples prepared with the same PFA resin and each catalyst were carbonized up to 1200 °C, under inert atmosphere. MVC porosity was studied by nitrogen adsorption/desorption, and by SEM and optical microscopy. Higher polymerization degree and higher residual mass were obtained with faster catalysts. No direct relation between the polymerization rate and the acid force was observed. PTLS promoted the fastest PFA polymerization process and the sulfuric acid, the slowest one. MVC samples were obtained by slow carbonization. MVC presented low specific surface S_BET from 1.4 to 7.4 m²/g. Nitric acid catalyst contributed the most to micropores formation. Micrometric apparent porosity was smaller for the catalysts having longer polymerizations times, such as phosphoric and sulfuric acid. Phosphoric catalyst corresponded to the lowest porosity in MVC. As the polymerization time increased, the average size of the micrometric surface pores tended to augment. The MVC macroscopic porosity increased with the S_BET increment. Acid catalysts choice exerted a fundamental role on the porosity of MVC. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43272.     

Dynamic Distribution of HIG2A between the Mitochondria and the Nucleus in Response to Hypoxia and Oxidative Stress

Mitochondrial respiratory supercomplex formation requires HIG2A protein, which also has been associated with cell proliferation and cell survival under hypoxia. HIG2A protein localizes in mitochondria and nucleus. DNA methylation and mRNA expression of the HIGD2A gene show significant alterations in several cancers, suggesting a role for HIG2A in cancer biology. The present work aims to understand the dynamics of the HIG2A subcellular localization under cellular stress. We found that HIG2A protein levels increase under oxidative stress. H₂O₂ shifts HIG2A localization to the mitochondria, while rotenone shifts it to the nucleus. HIG2A protein colocalized at a higher level in the nucleus concerning the mitochondrial network under normoxia and hypoxia (2% O₂). Hypoxia (2% O₂) significantly increases HIG2A nuclear colocalization in C2C12 cells. In HEK293 cells, chemical hypoxia with CoCl₂ (>1% O₂) and FCCP mitochondrial uncoupling, the HIG2A protein decreased its nuclear localization and shifted to the mitochondria. This suggests that the HIG2A distribution pattern between the mitochondria and the nucleus depends on stress and cell type. HIG2A protein expression levels increase under cellular stresses such as hypoxia and oxidative stress. Its dynamic distribution between mitochondria and the nucleus in response to stress factors suggests a new communication system between the mitochondria and the nucleus.     

Plasmonic propagations distances for interferometric surface plasmon resonance biosensing

A surface plasmon resonance (SPR) scheme is proposed in which the local phase modulations of the coupled plasmons can interfere and yield phase-sensitive intensity modulations in the measured signal. The result is an increased traceability of the SPR shifts for biosensing applications. The main system limitation is the propagation distance of the coupled plasmon modes. This aspect is therefore studied for thin film microstructures operating in the visible and near-infrared spectral regions. The surface roughness of the substrate layer is examined for different dielectrics and deposition methods. The Au layer, on which the plasmonic modes are propagating and the biosensing occurs, is also examined. The surface roughness and dielectric values for various deposition rates of very thin Au films are measured. We also investigate an interferometric SPR setup where, due to the power flux transfer between plasmon modes, the specific choice of grating coupler can either decrease or increase the plasmon propagation length.     

Scanning microelectrochemical characterization of the anti-corrosion performance of inhibitor films formed by 2-mercaptobenzimidazole on copper

The aim of this work is to explore the applicability of the scanning electrochemical microscope (SECM) to characterize the inhibiting effect of 2-mercaptobenzimidazole against the corrosion of copper. SECM was operated in the feedback mode by using ferrocene-methanol as redox mediator, and the sample was left unbiased at all times. The kinetic changes in the corrosion processes were monitored over time from the Z-approach curves. Furthermore, inhibitor-modified copper samples presenting various surface finishes were imaged by SECM and the scanning vibrating electrode technique (SVET), allowing changes both in the surface activity of metal-inhibitor films and in the extent of corrosion attack to be spatially resolved. Differences in the local electrochemical activity between inhibitor-free and inhibitor-covered areas of the sample were successfully monitored.     

Investigation of the corrosion resistance characteristics of pigments in alkyd coatings on steel

Pigments are added to polymeric coatings for enhancing the protective characteristics of the barrier films that are deposited on metal surfaces to prevent corrosion. Electrochemical impedance spectroscopy (EIS) measurements were performed on carbon steel specimens coated with alkyd primers containing different pigments. Corrosion monitoring was carried out in immersion tests in 3.0 wt.% NaCl solution open to air at room temperature. Changes in the impedance characteristics of the systems were found to occur as a function of the exposure time in all the cases, though their evolution with time showed marked differences which derived directly from nature of the pigments contained in the alkyd primers. The impedance response of the coatings was found to correspond to a porous film presenting localized electrochemically reactive areas, though pigments may facilitate additional resistance to the protective film, the extent of which was found to depend on the nature of the pigment. In this way, the best results were found for the alkyd primer containing aluminium powder.     

Novel copolymer for SiO2 nanoparticles dispersion

High performance polymers exhibiting multifunctional characteristics can be achieved by the introduction of inorganic nanoparticles like SiO₂ into the functional polymers. In the present work a copolymer epoxy poly(dimethylacrylamide) was synthesized to disperse the SiO₂ nanoparticles. The aim of the work is to develop a new method/process/material for the dispersion of nanoparticles and evaluating the performance of these composites. FT‐IR studies of the polymer adsorbed SiO₂ nanoparticles confirmed that the polymer molecules chain was anchored on the surface of the SiO₂ nanoparticles. The improved interfacial interaction between the particles and polymer enhanced the thermal properties of the composites. The results also show the newly synthesized polymer disperse the nanoparticles well as evidenced by SEM analysis, the uniformly dispersed SiO₂ nanoparticles in the polymer matrix and the particles almost remained in their original shape and size even after incorporation in to the polymer matrix. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Impact of N on the atomic-scale Sb distribution in quaternary GaAsSbN-capped InAs quantum dots

The use of GaAsSbN capping layers on InAs/GaAs quantum dots (QDs) has recently been proposed for micro- and optoelectronic applications for their ability to independently tailor electron and hole confinement potentials. However, there is a lack of knowledge about the structural and compositional changes associated with the process of simultaneous Sb and N incorporation. In the present work, we have characterized using transmission electron microscopy techniques the effects of adding N in the GaAsSb/InAs/GaAs QD system. Firstly, strain maps of the regions away from the InAs QDs had revealed a huge reduction of the strain fields with the N incorporation but a higher inhomogeneity, which points to a composition modulation enhancement with the presence of Sb-rich and Sb-poor regions in the range of a few nanometers. On the other hand, the average strain in the QDs and surroundings is also similar in both cases. It could be explained by the accumulation of Sb above the QDs, compensating the tensile strain induced by the N incorporation together with an In-Ga intermixing inhibition. Indeed, compositional maps of column resolution from aberration-corrected Z-contrast images confirmed that the addition of N enhances the preferential deposition of Sb above the InAs QD, giving rise to an undulation of the growth front. As an outcome, the strong redshift in the photoluminescence spectrum of the GaAsSbN sample cannot be attributed only to the N-related reduction of the conduction band offset but also to an enhancement of the effect of Sb on the QD band structure.     

Resistance variation of conductive ink applied by the screen printing technique on different substrates

This research study focuses on the application of conductive ink by the screen printing technique to evaluate the potential of creating printed electrodes and to investigate the effect of washing upon electrical resistance and flexibility. Two conductive inks were applied by a conventional screen printing method on four different textile substrates, 100% cotton, 50%/50% cotton/polyester, 100% polyester and 100% polyamide. The inks were also applied on a multifibre fabric. Atmospheric plasma treatment was applied to improve the adhesion to the samples, and the resistance values were compared with those of non‐treated samples. The values were measured before and after cleaning and washing tests, which were performed to simulate domestic treatment for garments to predict the behaviour of the inks after normal usage of the fabrics. Comfort properties like stiffness of the fabrics were also evaluated after five and 10 washing cycles. It was observed that PE 825 ink forms a thicker film on the fabric surface, contributing to the loss of flexibility of the textile. However, PE 825 ink also produced the best results in terms of durability and lower values of resistance. Polyamide fabrics lost their conductive property after five washing cycles due to weak bonding between the ink and the fibres, whereas cotton fibres provided the best results.