Hydrodynamically Guided Hierarchical Self‐Assembly of Peptide–Protein Bioinks

Effective integration of molecular self‐assembly and additive manufacturing would provide a technological leap in bioprinting. This article reports on a biofabrication system based on the hydrodynamically guided co‐assembly of peptide amphiphiles (PAs) with naturally occurring biomolecules and proteins to generate hierarchical constructs with tuneable molecular composition and structural control. The system takes advantage of droplet‐on‐demand inkjet printing to exploit interfacial fluid forces and guide molecular self‐assembly into aligned or disordered nanofibers, hydrogel structures of different geometries and sizes, surface topographies, and higher‐ordered constructs bound by molecular diffusion. PAs are designed to co‐assemble during printing in cell diluent conditions with a range of extracellular matrix (ECM) proteins and biomolecules including fibronectin, collagen, keratin, elastin‐like proteins, and hyaluronic acid. Using combinations of these molecules, NIH‐3T3 and adipose derived stem cells are bioprinted within complex structures while exhibiting high cell viability (>88%). By integrating self‐assembly with 3D‐bioprinting, the study introduces a novel biofabrication platform capable of encapsulating and spatially distributing multiple cell types within tuneable pericellular environments. In this way, the work demonstrates the potential of the approach to generate complex bioactive scaffolds for applications such as tissue engineering, in vitro models, and drug screening.     

Heteroatom Effect on Star‐Shaped Hole‐Transporting Materials for Perovskite Solar Cells

Three new star‐shaped hole‐transporting materials (HTMs) incorporating benzotripyrrole, benzotrifuran, and benzotriselenophene central cores endowed with three‐armed triphenylamine moieties ( BTP‐1 , BTF‐1 , and BTSe‐1 , respectively) are designed, synthesized, and implemented in perovskite solar cells (PSCs). The impact that the heteroatom‐containing central scaffold has on the electrochemical and photophysical properties, as well as on the photovoltaic performance, is systematically investigated and compared with their sulfur‐rich analogue ( BTT‐3 ). The new HTMs exhibit suitable highest‐occupied molecular orbitals (HOMO) levels regarding the valence band of the perovskite, which ensure efficient hole extraction at the perovskite/HTM interface. The molecular structures of BTF‐1 , BTT‐3 , and BTSe‐1 are fully elucidated by single‐crystal X‐ray crystallography as toluene solvates. The optimized (FAPbI₃)_0.85(MAPbBr₃)_0.15‐based perovskite solar cells employing the tailor‐made, chalcogenide‐based HTMs exhibit remarkable power conversion efficiencies up to 18.5%, which are comparable to the devices based on the benchmark spiro‐OMeTAD. PSCs with BTP‐1 exhibit a more limited power conversion efficiency of 15.5%, with noticeable hysteresis. This systematic study indicates that chalcogenide‐based derivatives are promising HTM candidates to compete efficiently with spiro‐OMeTAD.     

Comparing screening approaches to investigate stability of common items in Rasch equating

This paper used real and simulated data sets to compare three screening approaches often used in state-wide equating programs utilizing the Rasch model: Wright and Stone's t-statistic, robust z-statistic, and displace. Analyses of real data sets supported the superiority of robust z-statistic and displace measure relative to Wright and Stone's t-statistic. The simulation component did not support the contention that indiscriminate use of the +/-0.3 logits criterion inflates rates of Type I error for robust z-statistic and displace measure, although this contention was supported for the Wright and Stone's t-statistic. However, Type II error rates were largest for displace measure, followed by the robust z-statistic, then the t-statistic. The paper discusses the importance of a priori selection of a criterion for screening linking items and its effects on stability and accuracy of Rasch equating constant.     

Heat–Moisture Treatment on Pinhão Starch Impacts the Properties of the Biodegradable Films

Using non-conventional starch can benefit the industry since it can present different properties. It also can lead to new properties upon physical modification, which improves its derivate film properties. Therefore, the aim of this work is to evaluate the heat–moisture treatment (HMT) on pinhão starch and its effectiveness in film properties. After isolation using water as a solvent, the pinhão starch is treated by HMT for 16 h at 110 °C. Native and HMTed starches are used to produce biodegradable films. Pinhão starch and starch films chemical and physical properties are properly characterized. The HMT causes some changes in short-range ordered structures, reduces the relative crystallinity, and shifts the pinhão starch from C-type to A-type. Also, HMT decreases the peak viscosity and the breakdown, and improves thermal stability. These starch changes upon HMT reduces water vapor permeability, increases tensile strength, and elongation at the break of pinhão starch films. Desirable changes in starch and film properties are achieved by physically modifying pinhão starch using HMT, which is a promising alternative to chemical modifications.     

Familial study of patients with hereditary hemorrhagic telangiectasia

Rendu-Osler-Weber's disease or Hereditary Hemorrhagic Telangiectasia (HTT) is an autosomal dominant hereditary clinical entity characterized by the presence of telangiectasias on skin, mucous membranes and internal organs. The incidence of hepatic, pulmonary or cerebral complications justifies an early diagnostic. A familiar study of patients previously diagnosed of HTT in our hospital was made, establishing a protocol for the identification of asymptomatic or pauci-symptomatic cases. Fourteen patients were studied: 6 with a previous diagnostic, and 8 familiar contacts. Penetrance was of 85%. Epistaxis (80%) and telangiectasias on skin were the most frequent clinical findings. The visceral lesions found were gastrointestinal (28%), hepatic (15%), urological (15%) and pulmonary (7%). All patients were included in an hepatitis B virus vaccination program. It was also made a morphological study with Werhoeff's staining of the elastic layer, that allowed to distinguish both arterial and venous alterations.     

Osseointegration of Sandblasted and Acid-Etched Implant Surfaces. A Histological and Histomorphometric Study in the Rabbit

Titanium surface is an important factor in achieving osseointegration during the early wound healing of dental implants in alveolar bone. The purpose of this study was to evaluate sandblasted-etched surface implants to investigate the osseointegration. In the present study, we used two different types of sandblasted-etched surface implants, an SLA™ surface and a Nanoblast Plus™ surface. Roughness and chemical composition were evaluated by a white light interferometer microscope and X-ray photoelectron spectroscopy, respectively. The SLA™ surface exhibited the higher values (Ra 3.05 μm) of rugosity compared to the Nanoblast Plus™ surface (Ra 1.78 μm). Both types of implants were inserted in the femoral condyles of ten New Zealand white rabbits. After 12 weeks, histological and histomorphometric analysis was performed. All the implants were osseointegrated and no signs of infection were observed. Histomorphometric analysis revealed that the bone–implant contact % (BIC) ratio was similar around the SLA™ implants (63.74 ± 13.61) than around the Nanoblast Plus™ implants (62.83 ± 9.91). Both implant surfaces demonstrated a favorable bone response, confirming the relevance of the sandblasted-etched surface on implant osseointegration.     

High reliability outdoor sonar prototype based on efficient signal coding

Many mobile robots and autonomous vehicles designed for outdoor operation have incorporated ultrasonic sensors in their navigation systems, whose function is mainly to avoid possible collisions with very close obstacles. The use of these systems in more precise tasks requires signal encoding and the incorporation of pulse compression techniques that have already been used with success in the design of high-performance indoor sonars. However, the transmission of ultrasonic encoded signals outdoors entails a new challenge because of the effects of atmospheric turbulence. This phenomenon causes random fluctuations in the phase and amplitude of traveling acoustic waves, a fact that can make the encoded signal completely unrecognizable by its matched receiver. Atmospheric turbulence is investigated in this work, with the aim of determining the conditions under which it is possible to assure the reliable outdoor operation of an ultrasonic pulse compression system. As a result of this analysis, a novel sonar prototype based on complementary sequences coding is developed and experimentally tested. This encoding scheme provides the system with very useful additional features, namely, high robustness to noise, multi-mode operation capability (simultaneous emissions with minimum cross talk interference), and the possibility of applying an efficient detection algorithm that notably decreases the hardware resource requirements.     

Signal transduction mechanisms involved in in vitro ram sperm capacitation

We validate the chlortetracycline (CTC) technique for the evaluation of capacitation and acrosome reaction-like changes in ram sperm, carrying out a double estimation of the acrosome status after treatment with lysophosphatidylcholine, using fluorescein isocyanate (FITC)-RCA/ethidium homodimer 1 (EthD-1) and CTC/EthD-1. Highly consistent results and a positive correlation between the results of acrosome-reacted sperm evaluated with both techniques were obtained. In this study, we evaluate the effects of ram sperm capacitation of BSA, Ca(2+), NaHCO(3) and cAMP agonists and their influence on the associated protein tyrosine phosphorylation. We found a time-dependent increase in capacitation related to protein tyrosine phosphorylation, either in the absence or the presence of BSA. The addition of an increasing concentration of cholesterol to samples containing BSA did not influence results. The effect of bicarbonate was concentration-dependent, with a significantly lowered value of non-capacitated sperm in the presence 18 and 25 mM. The addition of extracellular calcium did not significantly increase either the proportion of capacitated sperm or the protein tyrosine phosphorylation signalling, although a significantly higher value of acrosome-reacted sperm was found in samples containing 4 mM Ca(2+). cAMP agonists increased capacitated sperm and protein tyrosine phosphorylation signalling. The inhibition of protein kinase A by H-89 caused a decrease in sperm capacitation. Addition of a calcium-entry blocker (Verapamil; Sigma) did not influence results, which suggests that the calcium entry blocker was unable to inhibit the calcium influx associated with capacitation in ram sperm. Our findings might benefit our understanding of the biochemical mechanisms involved in mammalian sperm capacitation and ultimately, fertility.     

Spatial scanning spectroelectrochemistry. Study of the electrodeposition of Pd nanoparticles at the liquid/liquid interface

Spatial scanning spectroelectrochemistry is a new analytical technique that provides spectral information at different distances from an electrified liquid/liquid interface where an electrochemical process takes place. As a proof of concept, we have studied two different electrochemical processes at the electrified liquid/liquid interface: (1) Ru(bpy)(3)(2+) transfer through the water/1,2-dichloroethane interface and (2) electrodeposition of Pd nanoparticles at the water/1,2-dichloroethane interface. The instrumental setup developed consists of a movable slit for the light beam to sample at well-defined positions on both sides of the interface, providing important information about the chemical process occurring. If the slit is scanned at different distances from the interface during an electrochemical experiment, a complete picture of the reactions and equilibria in the diffusion layer can be obtained. For example, in the case of the Ru(bpy)(3)(2+), the experiments show clearly how the complex is transferred from one phase to the other. In the case of electrosynthesis of Pd nanoparticles, it is demonstrated that nanoparticles are not only deposited at the interface but diffuse to the aqueous bulk solution. These in situ observations were confirmed by ex situ experiments using transmission electron microscopy.     

Water-dependent micromechanical and rheological properties of silica colloidal crystals studied by nanoindentation

Here we show the suitability of nanoindentation to study in detail the micromechanical response of silica colloidal crystals (CCs). The sensitivity to displacements smaller than the submicrometer spheres size, even resolving discrete events and superficial features, revealed particulate features with analogies to atomic crystals. Significant robustness, long-range structural deformation, and large energy dissipation were found. Easily implemented temperature/rate-dependent nanoindentation quantified the paramount role of adsorbed water endowing silica CCs with properties of wet granular materials like viscoplasticity. A novel "nongranular" CC was fabricated by substituting capillary bridges with silica necks to directly test water-independent mechanical response. Silica CCs, as specific (nanometric, ordered) wet granular assemblies with well-defined configuration, may be useful model systems for granular science and capillary cohesion at the nanoscale.