XANES investigation of the enhanced chemical stability of Pd in supported Pd–Mo catalysts

The XANES (X-ray absorption near edge structure) technique was used to study Pd and Mo catalysts deposited on supported Al₂O₃/SiO₂ and Al₂O₃/Si-MCM-41 in the form of monometallic and bimetallic systems. The results indicate that Pd has stronger chemical stability when in the presence of Mo and is always in the metallic form, which is surprising, because the samples were not subjected to reducing conditions prior to the measurements. The increased stability was attributed to the formation of a core-shell structure with a Pd rich core and a Mo rich surface.     

Functional properties of collagenous material from chicken feet

Collagenous material was obtained from chicken feet skins and tendons, defatted with ethylic ether and treated with 0.05 M and 0.6 M NaCl solutions. Part of the material was dried at 35 degrees C in a forced air convection oven and another was freeze-dried. The air dried material had 77.2 g/100 g of collagen and the freeze-dried material 76.7 g/100 g. Both dehydrated materials showed the same behaviour for gel formation and cold water holding capacity. The material air dried had higher emulsifying capacity than the freeze-dried one. The collagen of freeze-dried material had higher solubility in 0.5 M acetic acid and water at 70 degrees C than air dried material. Gel strength, emulsion stability and water holding capacity at 60 degrees C were higher for freeze-dried material. The results indicate the potential use of these materials as functional ingredients in meat products.     

The effect of grazing intensity and the presence of a forage legume on nitrogen dynamics in Brachiaria pastures in the Atlantic forest region of the south of Bahia, Brazil

It has been shown that with careful grazing management and addition of Pand K, but not N, fertilisers Brachiaria pastures are ableto maintain sustainable live weight gains over many years. However, standardon-farm practice, which generally involves high stocking rates, leads after afew years to pasture decline due mainly to N deficiency for grass regrowth. Togenerate an understanding of the mechanism of pasture decline and possiblemanagement options to mitigate this process, a study was performed in theAtlantic forest region of the south of Bahia state to study the N dynamics inpastures of Brachiaria humidicola subject to threedifferent stocking rates of beef cattle, with and without the presence of theforage legume Desmodium ovalifolium. Despite the fact thatthe C:N ratio of the deposited litter was high (60 to 70) the rate ofdecomposition was very rapid (k –0.07 gg^–1 day^–1) and annual rates of Nturnover through the litter pathway were between 105 and 170 kg Nha^–1 year^–1. In the grass-onlypasturesas stocking rate increased from 2 to 3 head ha^–1, N recycledinthe litter decreased by 11%, but a further increase to 4 headha^–1 decreased N recycling by 30% suggesting thatbeyonda certain critical level higher grazing stocking rates would lead to pasturedecline if there was no N addition. High stocking rates decreased theproportionof the legume in the sward, but at all rates the concentration of N in both thegreen and dead grass in the forage on offer and in the litter was higher in themixed sward. The presence of the legume caused a decrease in the C:N ratio ofthe microbial biomass while both soil N mineralisation and nitrificationincreased. This increased rate of turnover of the microbial biomass and thecontribution of N₂ fixation to the legume resulted in largeincreasesin the N recycled via litter deposition ranging from 42 to 155 kg Nha^–1 year^–1.     

Experimental procedure for kinetic studies on egg-shell catalysts: The case of liquid-phase hydrogenation of 1,3-butadiene and n-butenes on commercial Pd catalysts

A study of the liquid-phase hydrogenation of 1,3-butadiene on commercial Pd/Al₂O₃ catalysts of the “egg-shell” type has been performed. Experimental conditions (40°C, 4 atm and high conversion of the di-olefin) were selected in accordance to industrial operating conditions employed for selective hydrogenation of 1,3-butadiene. Three experimental schemes were tested: a slurry reactor, a rotating-basket reactor, and a recirculation system with an external fixed-bed reactor. Significant drawbacks shown by the two former devices were mainly derived from the very high activity and the egg-shell structure of the catalysts. Instead, the recirculation system was found to be an excellent alternative.

Although Pd is present only within a very thin external layer (around 50–250 μm), strong diffusion effects impairing selectivity were observed. Plausible kinetic expressions corresponding to nine series–parallel overall reactions are derived from a mechanistic model. To deal with this network of fast reactions, a rather complex set of computational and predictive tools were employed. A worked out example from several replicates demonstrates the capability of both, experimental and data analysis procedures, for inferring kinetic parameters of the proposed model.     

Development of semitransparent wood‐polymer composites

A new material has been developed consisting of pieces of wood embedded within a matrix of acrylic polymer, resulting in a transparent or semitransparent wood‐based product. This material presents quite appealing aesthetic features, thereby opening new possibilities for decorative applications. Because acrylic and methacrylic monomers are in the liquid state at room temperature, it is possible to introduce wood (in the current case, walnut wood) into a mixture of acrylic (hydroxypropyl acrylate) and/or methacrylic monomers (methyl methacrylate and 2‐hydroxyethyl methacrylate) along with a plasticizer (dioctyl phthalate) in the presence of a chemical initiator (benzoyl peroxide). A transparent polymeric matrix with dispersed wood is then obtained through bulk free‐radical polymerization. Introducing this reaction mixture along with pieces of wood into a mold results in a wood‐polymer composite. A 2^4?1 experimental fractional factorial design was implemented to study the importance of the composition of these materials on several relevant properties. The sheets produced were characterized by tensile testing, dynamic mechanical thermal analysis, thermal gravimetric analysis, and heat deflection temperature. The models obtained for predicting each property pointed to valuable insights regarding the influential constituents. In particular, our results suggested that monomers to be used in future applications of this material should be selected in terms of their cost and the desired flexibility for the final product, not in terms of their polarity. J. VINYL ADDIT. TECHNOL., 2012. © 2012 Society of Plastics Engineers     

Antioxidant protection of high-pressure processed minced chicken meat by industrial tomato products

Pressure-treatment at 300 MPa of minced chicken breast meat did not induce significant lipid oxidation during chill storage for up to 15 days, while pressure-treatment at 600 and 800 MPa enhanced formation of secondary lipid oxidation products measured as thiobarbituric acid reactive substances. However, a waste product from industrial tomato paste production was found to yield efficient protection against lipid oxidation in pressurized chicken meat. Addition of 0.30% tomato waste or of 0.10% final tomato paste to minced meat led to a lag phase of 6 days for formation of secondary oxidation products in meat pressure treated at 600 MPa. The waste product seemed special efficient in protecting chicken meat pressurized at 800 MPa, as a notably lower rate of formation of secondary oxidation products was found. Flavonoids washed out with the waste fraction may be more efficient as antioxidant than the other phenolics or carotenoids present in the other paste processing fractions. Addition of tomato paste fractions did not influence radical formation measured by electron spin resonance spectroscopy and the tomato waste is considered to be effective as antioxidant at subsequent reactions leading to secondary lipid oxidation products.     

FAME Production and Fatty Acid Profiles from Moist Chlorella sp. and Nannochloropsis oculata Biomass

In the present study, we investigated the production of fatty acid methyl esters (FAME) from moist Chlorella sp. and Nannochloropsis oculata biomass using a hydrolysis–esterification process. Additionally, we evaluated for the first time the fatty acid profile before and after this process. Hydrolysis of the lipid fraction was performed on a moist biomass in the presence of differing amounts of an acid catalyst in both 50 and 100 % w/w water relative to the biomass. The esterification of the crude extracts of the free fatty acids (FFA) was then investigated. The experiments show that in the presence of 50 % w/w water relative to the biomass, the hydrolysis–esterification process results in higher FFA and FAME yields. The analysis of the fatty ester profiles did not reveal any degradation of the FFA from the microalgae biomass under the hydrolysis–esterification conditions. The results were compared with both extraction–transesterification and direct transesterification processes using dry biomass. The extraction–transesterification and hydrolysis–esterification processes resulted in similar FAME yields and similar profiles of the fatty esters from dry and moist biomass materials, respectively.     

Structure and analgesic properties of layered double hydroxides intercalated with low amounts of ibuprofen

Ibuprofen‐intercalated layered double hydroxides (LDH‐IBU) have been successfully synthesized via a coprecipitation method with a nominal [Al³⁺]/[Mg²⁺] ratio of 0.5 and a variable molar IBU/([Al³⁺]+[Mg²⁺]) ratio of 0, 0.15, 0.18, 0.24, 0.36, and 0.72. After an accurate determination of the composition, the nature of the intercalated species and the effective intercalation yield from to IBU, it is shown that the synthesis route used allows a good control of the quantity of intercalated IBU within the LDH framework. This results in different samples with full or partial IBU intercalation in the interlayer space in exchange of nitrate anions. The analysis of the X‐ray diffraction basal reflections reveals that the intercalation of IBU in the framework only increases the basal distances with no alteration of the brucite‐type layers. Also, a computational study used to model the positions and shapes of the basal reflections showed that the structure of the nonfully intercalated compounds follows a random interstratification scheme. Finally, three samples ranging from slightly to fully IBU‐intercalated galleries were selected for preliminary in vivo assays. These tests showed a strong tendency that after 24 hours the low yield of IBU‐intercalated compounds are almost as efficient as the fully intercalated sample.     

Maternal Flaxseed Oil During Lactation Enhances Bone Development in Male Rat Pups

Flaxseed oil is an alpha linolenic acid source important in the growth and body development stage; furthermore, this acid acts on adipose tissue and bone health. The aim of this study was to evaluate body composition, fatty acid composition, hormone profile, retroperitoneal adipocyte area and femur structure of pups at weaning, whose mothers were fed a diet containing flaxseed oil during lactation. After birth, pups were randomly assigned: control (C, n = 12) and flaxseed oil (FO, n = 12), rats whose mothers were treated with diet containing soybean or flaxseed oil. At 21 days, the pups were weaned and body mass, length, body composition, biochemical parameter, leptin, osteoprotegerin, osteocalcin, fatty acids composition, intra‐abdominal fat mass and femur structure were analyzed. FO showed (p < 0.05): higher body mass (+12 %) and length (+9 %); body fat mass (g, +45 %); bone mineral density (+8 %), bone mineral content (+55 %) and bone area (+35 %), osteocalcin (+173 %) and osteoprotegerin (+183 %). Arachidonic acid was lower (p < 0.0001), alpha‐linolenic and eicosapentaenoic were higher (p < 0.0001). Intra‐abdominal fat mass was higher (+25 %), however, the retroperitoneal adipocytes area was lower (?44 %). Femur mass (+10 %), distance between epiphyses (+4 %) and bone mineral density (+13 %) were higher. The study demonstrates that adequate flaxseed oil content during a lactation diet plays an important role in the development of pups.