Analytical solution of mixed electromagnetic/pressure driven gaseous flows in microchannels

The influences of wall-slip/jump conditions on the fluid flow and heat transfer for hydrodynamically and thermally fully developed electrically conducting gaseous flow subject to an electromagnetic field inside a parallel plate microchannel with constant heat flux at walls are studied under the assumptions of a low-magnetic Reynolds number. The governing equations are non-dimensionalized and then analytical solutions are derived for the friction and the heat transfer coefficients. The fluid flow and the heat transfer characteristics obtained in the analytical solutions are discussed in detail for different parameters such as the Knudsen, Hartmann, and Brinkman numbers. The velocity profiles verify that even with a constant Knudsen number, applying a stronger electromagnetic field gives rise to an increase in the slip velocity. The results also reveal that on increasing the Hartmann number, the heat transfer rate as well as the friction factor is enhanced, whereas it tends to suppress the movement of the fluid. Further, it is found that the Nusselt and the Poiseuille numbers are less sensitive to the electromagnetic field effects with increase in rarefaction.     

Effect of hydrogen addition using on-board alkaline electrolyser on SI engine emissions and combustion

In this study, an electrolyser was used to supply hydrogen to the SI engine. Firstly, the appropriate operation point for the electrolyser was determined by adjusting the amount of KOH in the electrolyte to 5%, 10%, 20% and 30% by mass, and applying 12 V, 16 V, 20 V, 24 V and 28 V voltages. Tests were first carried out with the gasoline without the use of an electrolyser, followed by operating the electrolyser at the appropriate point and sending obtained H₂ and O₂ to the engine in addition to the gasoline. The SI engine was operated between 2500 rpm and 3500 rpm engine speeds with and without hydrogen addition. Cylinder pressure, the amount of gasoline, H₂ and O₂ consumed by the engine and the emission data were collected from the test system at the aforementioned engine speeds. Furthermore, indicated engine torque, indicated specific energy consumption, specific emissions and HRR values were calculated. According to the results obtained, improvement in ISEC values was observed, and CO and THC values were improved by up to 21.3% and 86.1% respectively. Even though the dramatic increase in NO_x emissions cannot be averted, they can be controlled by equipment such as EGR three-way catalytic converter.     

Vibration and Critical Speed of Orthogonally Stiffened Rotating FG Cylindrical Shell Under Thermo-Mechanical Loads Using Differential Quadrature Method

In this article, an approximate solution using differential quadrature method is presented to investigate the effects of thermo-mechanical loads and stiffeners on the natural frequency and critical speed of stiffened rotating functionally graded cylindrical shells. Transverse shear deformation and rotary inertia, based on first-order shear deformation shell theory (FSDT), are taken into consideration. The equations of motion are derived by the Hamilton's principle while the stiffeners are treated as discrete elements. Material properties are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fraction of the constituents. The temperature field is assumed to be varied in the thickness direction. The equations of motion as well as the boundary condition equations are transformed into a set of algebraic equations applying the DQM. The results obtained include the relationship between frequency characteristics of different power-law index, rotating velocities, thermal loading and amplitude of axial load. To validate the present analysis, the comparison is made with a number of particular cases in literature. Excellent agreement is observed and a new range of results are presented for stiffened rotating FG cylindrical shell under thermo-mechanical loads which can be used as a benchmark to approximate solutions.     

Chitosan effects on glass matrices evaluated by biomaterial. MAS-NMR and biological investigations

Bioactive glass 46S6 and biodegradable therapeutic polymer (Chitosan: CH) have been elaborated to form 46S6-CH composite by freeze-drying process. The kinetics of chemical reactivity and bioactivity at the surface were investigated by using physicochemical techniques, particularly solid-state MAS-NMR. Immortalized cell line used to construct multicellular spheroids was employed as three-dimensional (3D) cell cultures for in vitro studies. Obtained results showed a novel structure of the composite; the chemical treatment (ultrasound, magnetic stirring, freeze drying process and lyophilization) led the bioactive glass particles to be loaded in the chitosan-based materials. ²⁹Si and ³¹P MAS-NMR results showed the emergence of two new species, Q _Si ³ (OH) and Q _Si ⁴ , which are characteristic of the vitreous network dissolution in simulated body fluid (SBF). MAS-NMR also confirmed the formation of amorphous calcium phosphate (ACP) at the surface of the initial 46S6-CH. Three-dimensional (3D) cell cultures highlighted the effect of chitosan, where the cell viability reached up to 78% in 46S6-CH composite and up to 67% in 46S6. The association of (CH) and bioactive glass (BG) matrix promotes a highly significant bioactivity, demonstrating surface bone formation and satisfactory behavior in biological environment.     

Study on single and binary catalytic systems of pyridine-imine catalysts based on nickel and iron in synthesis of reactor blends and low-density polyethylene nanocomposites

In the presence of modified methylaluminoxane as cocatalyst, the behavior of a binary catalytic system based on pyridine-imine nickel ( N ) and iron ( F ) catalysts was evaluated in order to reach a proper mixture of polyethylene (PE). A computational study along with kinetic profile suggested that the catalyst F with higher electron affinity (A) and electrophilicity (ω) in the methyl cationic active center and stronger interaction with the monomer led to high integrated monomer consumption and higher activity. In addition, the samples produced by the mixture of catalysts showed a higher value of [19.4 × 10⁴ g (PE) mol (Fe+Ni)⁻¹ h⁻¹)], melting point (127.8 °C), and crystallinity extent (41.29%) than the samples produced by the single catalysts. The addition of multiwalled carbon nanotubes (MWCNT) into the polymerization media reduced the activity of catalysts [from 7.50 × 10⁴ to 0.66 × 10⁴ g (PE) mol (Fe+Ni)⁻¹ h⁻¹] and the thermal properties of the low-density polyethylene nanocomposite samples. However, the sample containing 2.33% MWCNT_20-30 improved the total thermal stability of the neat polyethylene blend up to 400 °C. Scanning electron microscope images of the samples demonstrated irregular to virtually uniform morphologies were obtained through the in situ and solution-mixing techniques. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47376.     

A multicriteria optimization model for cloud service provider selection in multicloud environments

Multicloud computing is a strategy that helps customers to reduce reliance on any single cloud provider (known as the vendor lock-in problem). The value of such strategy increases with proper selection of qualified service providers. In this paper, a constrained multicriteria multicloud provider selection mathematical model is proposed. Three metaheuristics algorithms (simulated annealing [SA], genetic algorithm [GA], and particle swarm optimization algorithm [PSO]) were implemented to solve the model, and their performance was studied and compared using a hypothetical case study. For the sake of comparison, Taguchi's robust design method was used to select the algorithms' parameters values, an initial feasible solution was generated using analytic hierarchy process (AHP)—as the most used method to solve the cloud provider selection problem in the literature, all three algorithms used that solution and, in order to avoid AHP limitations, another initial solution was generated randomly and used by the three algorithm in a second set of performance experiments. Results showed that SA, GA, PSO improved the AHP solution by 53.75%, 60.41%, and 60.02%, respectively, SA and PSO are robust because of reaching the same best solution in spite of the initial solution.     

Chemical Synthesis and Characterization of Novel Antibacterial Polycyclic Polymer

Polyaniline (PAn) and poly(alkyl substituted anilines) were synthesized in aqueous media by chemical polymerization of alkyl substituted aniline in presence of ammonium peroxydisulphate as an oxidant. The products were investigated in terms of morphology, chemical structure, and mechanism of polymerization with scanning electron microscope (SEM), transmission electron microscopy (TEM), fourier transform infrared (FTIR), and UV–visible spectroscopy (UV–vis), respectively. Results indicated that physicochemical properties of poly(alkyl substituted anilines) depend on substituent groups bonded to N-position. In general, alkyl-substituted PAn have similar chemical and optical properties to parent PAn and it seems that the substituted PAn follow the same polymerization mechanism as reported for PAn. The prepared polymers were then tested for the antibacterial properties against Gram-negative bacteria: Escherichia coli (E. coli). The antibacterial properties were assessed by measuring the zones of inhibition. The antimicrobial results showed clearly that PAn and poly(alkyl substituted anilines) exhibited excellent antibacterial activity against the growth of E. coli microorganism.     

Appraisal of Agriglass in Promoting Maize Production Under Abiotic Stress Conditions

An agriglass composition containing different oxides acts as a slow release for macro and micro nutrients and was chosen to improve maize yield under most important abiotic stresses which affecting agriculture development; salinity and drought. A field experiment was performed in salt affected soil (EC =?7.5 dSm^??1) by using different water deficit rates (I1 = 100, I2 = 85 and I3 = 70% of maize water requirements). Irrigation levels were located in main plots. Every main-plot divided into six sub-plots contained glassy fertilizer treatments [F1 = 55 kg fed^?1 with 1/2 mm diameter of agriglass (fed. =?4200 m²), F2 = 55 kg fed^?1 with 1 mm diameter, F3 = 80 kg fed^?1 with 1/2 mm diameter, F4 = 80 kg fed^?1 with 1 mm diameter, F5 = Recommendations of Ministry of Agriculture and F6 = control]. The experimental results demonstrated that, ears, straw, grains and biological yields increased with increasing both water and agriglass rates. Application of agriglass as a slow release fertilizer improved yield more than mineral fertilizer. Some growth parameters, water use efficiency (IWUE), macronutrients concentration and their relations were included. Other studies on residual effect of agriglass and the annual application rates to withstand salinity and drought stress by strategic crops are required.     

Characterization and Beneficiation of Gold Mining By-products as Source of High-Quality Silica for High Technical Applications; Response Surface Studies and Optimization

Silicon - This paper aims to evaluate and upgrade the quality of quartz mining by-products through acid leaching process. The quartz samples were collected as gold mine by-products from El Sid-...     

In vivo study of hybrid biomaterial scaffold bioactive glass–chitosan after incorporation of Ciprofloxacin

The present study aimed to evaluate the effect of bioactive glass as well as the presence of Ciprofloxacin drug (%Cip) into bioactive glass–chitosan composite on the in vivo behavior of these scaffolds. These scaffolds were implanted in the femoral condyl of an ovariectomized rat. The serum and organs (liver and kidney) of the under investigated rats were analyzed. Also the physicochemical properties of the prepared implants were assessed using Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) before and after implantation (at different periods of implantation). Biochemical and histological analyses of the under investigated rats proved the biocompatibility of the prepared scaffolds. The hydroxyapatite like layer was significantly precipitated on the surface of BG–CH scaffold than BG–CH–20Cip. In this same period, FT-IR of BG–CH shows complete disappearance of Si–O–Si. Their characteristics bands were replaced by P–O group arisen form bone apatite bands. Physicochemical results show progressive degradation of BG–CH and BG–CH–20Cip that occurred at the same time as replacement of the implant by an apatite layer. However, the bioresorbability and bioactivity of BG–CH are faster than those of BG–CH–20Cip. Therefore, the incorporation of the Ciprofloxacin in the BG–CH induces a retarding effect on the formation of the hydroxyapatite, and consequently on the ossification, without any side effects on the liver–kidney.