Some Studies on Starch Carbamate

Starch carbamate was prepared by reacting maize starch with urea using solid state technique. The different factors affecting this reaction were studied. These factors include urea concentration, type of starch, reaction and duration. The carbamate extent and carbamation reaction efficiency (%) were traced by estimating the nitrogen content of the reaction product. Solubility, viscosity and total ester content of starch carbamate samples were estimated. The carbamate extent increases by increasing urea concentration as well as reaction temperature and duration. Increasing the reaction temperature and duration has the same effect on carbamation reaction efficiency (%), while increasing urea concentration do the reverse. The solubility (%) of starch carbamate samples depends on urea concentration, reaction temperature and duration as well as the type of starch used. The maximum solubility obtained was 63% and 43% for starch carbamate derived from pregelled and native starch, respectively. Tentative mechanism for the reaction between starch and urea has been proposed.     

Reactions with Thiazolo[3,2-b]-s-triazol-3(2H)-ones

5-Aryl-3-carboxymethylthio-1,2,4-triazoles 2 are cyclised to 6-arylthiazolo[3,2-b]-s-triazol-3(2H)-ones 3 . This structural assignment has been based on IR and NMR spectra. 2-Arylmethylene-6-arylthiazolo[3,2-b]-s-triazol-3(2H)-ones 7 were prepared by several methods. Compounds 3 coupled with diazotised anilines to give 2,3-dihydro-6-arylthiazolo[3,2-b]-s-triazole-2,3-dione 2-arylhydrazones 8 . The action of amines on 3a opens the thiazolone ring with the formation of substituted (5-phenyltriazol-3-ylthio)-acetamides 9 .     

Synthesis and characterization of (poly (N-vinyl formamide)—pregelled starch—graft copolymer

Bromate / cyclohexanone redox system was investigated as a novel initiator for graft copolymerization of N-vinyl formamide onto pregelled starch. A number of variables in the grafting reaction were investigated including N-vinyl formamide, cyclohexanone, bromate ion, sulphuric acid and pregelled starch concentrations, material to liquor ratio along with polymerization time and temperature. The graft copolymers were evaluated in terms of graft yield, graft reaction efficiency and homopolymer formation (%). The optimum conditions for grafting of N-vinyl formamide onto pregelled starch are: N-vinyl formamide 50% based on weight of substrate, cyclohexanone 15 mmol / l, bromate ion, 30 mmol / l, liquor ratio 10, pH 6, time 120 min., and temperature 40°C. On the other hand, characterizations of the resultant copolymers with respect to swelling capacity, solubility %, metal ion up-take and suitability as a sizing agent for cotton textiles were investigated. The results obtained reflect that, the resultant copolymer shows better results for the aforementioned properties in comparison with that obtained from native pregelled starch as a starting substrate.     

Synthesis and characterization of poly(ester‐ether‐imide)s derived from 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene

A series of novel aromatic poly(ester‐ether‐imide)s with inherent viscosity values of 0.44–0.74 dL g^?1 were prepared by the diphenylchlorophosphate‐activated direct polycondensation of an imide ring‐containing diacid namely 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene ( 1 ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. Owing to comparison of the characterization data, an ester‐containing model compound ( 2 ) was also synthesized by the reaction of 1 with phenol. The model compound 2 and the resulted polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(ester‐ether‐imide)s were also determined. The resulting polymers exhibited an excellent organosolubility in a variety of high polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, and N‐methyl‐2‐pyrrolidone. They were soluble even in common less polar organic solvents such as pyridine, m‐cresol, and tetrahydrofuran on heating. Crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resulted polymers exhibited nearly an amorphous nature. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 221 and 245°C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(ester‐ether‐imide)s were found to be over 410°C in nitrogen. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Irradiation grafting of methyl methacrylate monomer onto ultra‐high‐molecular‐weight polyethylene: An experimental design approach for improving adhesion to bone cement

The grafting of methyl methacrylate (MMA) onto ultra‐high‐molecular‐weight polyethylene (UHMWPE) and chromic acid etched UHMWPE was conducted with a preirradiation method in air in the presence of a Mohr salt and sulfuric acid. The grafted samples were characterized by Fourier transform infrared (FTIR) spectroscopy, a gravimetric method, differential scanning calorimetry, scanning electron microscopy (SEM), and interfacial bonding strength measurements. The FTIR results showed the presence of ether and carbonyl groups in the MMA‐grafted UHMWPE (MMA‐g‐UHMWPE) samples. The Taguchi experimental design method was used to find the best degree of grafting (DG) and bonding strength. The efficient levels for different variables were calculated with an analysis of variance of the results. SEM micrographs of MMA‐g‐UHMWPE samples showed that with increasing DG and chromic acid etching, the MMA‐g‐UHMWPE rich phase increased on the surface; this confirmed the high interfacial bonding strength of the grafted samples with bone cement. The grafting of the MMA units onto UHMWPE resulted in a lower crystallinity, and the crystallization process proceeded at a higher rate for the MMA‐g‐UHMWPE samples compared to the initial UHMWPE; this suggested that the MMA grafted units acted as nucleating agents for the crystallization of UHMWPE. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Gelatin based pH‐sensitive hydrogels for colon‐specific oral drug delivery: Synthesis,characterization, and in vitro release study

Based on gelatin (Gltn) and acrylic acid (AAc), biodegradable pH‐sensitive hydrogel was prepared using gamma radiation as super clean source for polymerization and crosslinking. Incorporation of PAAc in the prepared hydrogel was confirmed by Fourier transform infrared spectroscopy (FTIR). The effect of PAAc content on the morphological structure of the prepared hydrogel swollen at pH 1, 5, and 7 was examined using scanning electron microscopy (SEM). The results showed the dependence of the porous structure of the prepared hydrogels on AAc content and the pH of the swelling medium. Swelling properties of gelatin/acrylic acid copolymer hydrogels with different AAc contents were investigated at different pH values. Swelling data showed that the prepared hydrogels possessed pronounced pH sensitivity. In vitro release studies were performed to evaluate the hydrogel potential as drug carrier using ketoprofen as a model drug. Experimental data showed that the release profile depends on both hydrogel composition and pH of the releasing medium. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Copolymerization of ethylene/α‐olefins using bis(2‐phenylindenyl)zirconium dichloride metallocene catalyst: structural study of comonomer distribution

Catalysts have a major role in the polymerization of olefins and exert their influence in three ways: (1) polymerization behaviour, including polymerization activity and kinetics; (2) polymer particle morphology, including bulk density, particle size, particle size distribution and particle shape; and (3) polymer microstructure, including molecular weight regulation, chemical composition distribution and short‐ and long‐chain branching. By tailoring the catalyst structure, such as the creation of a bridge or introducing a substituent on the ligand, metallocene catalysts can play a major role in the achievement of desirable properties. Kinetic profiles of the metallocene catalyst used in this study showed decay‐type behaviour for copolymerization of ethylene/α‐olefins. It was observed that increasing the comonomer ratio in the feedstock affected physical properties such as reducing the melting temperature, crystallinity, density and molecular weight of the copolymers. It was also observed that the heterogeneity of the chemical composition distribution and the physical properties were enhanced as the comonomer molecular weight was increased. In particular, 2‐phenyl substitution on the indenyl ring reduced somewhat the melting point of the copolymers. In addition, the copolymer produced using bis(2‐phenylindenyl)zirconium dichloride (bis(2‐PhInd)ZrCl₂) catalyst exhibited a narrower distribution of lamellae (0.3–0.9 nm) than the polymer produced using bisindenylzirconium dichloride catalyst (0.5–3.6 nm). The results obtained indicate that the bis(2‐PhInd)ZrCl₂ catalyst showed a good comonomer incorporation ability. The heterogeneity of the chemical composition distribution and the physical properties were influenced by the type of comonomer and type of substituent in the catalyst. Copyright © 2010 Society of Chemical Industry     

The effects of the azimuthal position of the measurement plane on the flow parameters determined by PIV within a stirred vessel

Two-dimensional particle image velocimetry (PIV) is usually used to determine the complex flow field in mechanically agitated vessels on the basis of measurements taken in a single vertical plane, thus, assuming axial symmetry. In this paper, we use 2D PIV to investigate the effects of the azimuthal position of the measurement plane in a fully baffled vessel agitated by a pitched blade turbine. Seventeen planes located at 5 degree intervals between two adjacent baffles are analysed. To maintain a high spatial resolution of ～1 mm when examining each plane, a two-block approach is employed combining data from two fields of view to reconstruct the whole flow field. Time-averaged velocity and turbulent kinetic energy fields are obtained under fully turbulent conditions as a function of the azimuthal position of the laser plane. It is shown that the assumption of axial symmetry for such Eulerian fields is not fully justified within a fully baffled vessel, as there are considerable differences between planes. The results also show for the type and size of impeller used here, the importance of including both the axial and radial discharge contributions for an accurate evaluation of the flow number, otherwise it can be underestimated by up to 60%. The three-dimensional nature of the PIV measurements has also enabled the mass continuity to be accurately verified throughout the vessel.     

Shannon entropy for local and global description of mixing by Lagrangian particle tracking

If 100 dice cannot be cast simultaneously, one single die can be cast 100 times. On the basis of this simple principle, the experimental technique of positron emission particle tracking has been used to develop and implement a new methodology for quantifying the local and global mixing characteristics within a mechanically agitated fluid batch system. This Lagrangian technique uses a single positron-emitting particle as flow follower. Using a high data acquisition rate, such a tracer is continuously tracked in 3D space and time to accurately determine its trajectory over a considerable period of time. By partitioning its long trajectory, the single particle tracer can be regarded as thousands of simultaneously tracked particles which are instantaneously, locally and non-invasively injected in the mixing system at varying feed positions. A large amount of PEPT data were collected for impeller rotational speeds ranging from 100 to 500 rpm which allowed new statistical tools derived from information theory, such as Shannon entropy and uncertainty, to be implemented in the data analysis. Thus, measurements of entropy mixing indices were obtained as a function of position, time and impeller speed. The method also allowed the determination of characteristic time parameters including the macroscale mixing time which agreed very well with correlations of the dimensionless mixing time available in the mixing literature. Detailed local information is provided on minimum mixing time positions for feed and withdrawal of material, which can be used to optimise the design or operation of stirred batch mixing systems.     

Comparison of essential oils compositions of Nepeta persica obtained by supercritical carbon dioxide extraction and steam distillation methods

Essential oil of Nepeta persica cultivated in Iran was obtained by steam distillation and supercritical (carbon dioxide) extraction methods. The oils were analysed by capillary gas chromatography using flame ionization and mass spectrometric detections. The compounds were identified according to their retention indices and mass spectra (EI, 70 eV). The effects of different parameters such as pressure, temperature, modifier volume and extraction times (dynamic and static) on the supercritical fluid extraction (SFE) of N. persica oil were investigated. The results showed that under the pressure of 20.3 MPa, temperature of 45 °C, methanol of 1.5% v/v), dynamic extraction time of 50 min and static extraction time of 25 min extraction was more selective for the 4αβ,7α,7aα-nepetalactone. Twelve compounds were identified in the steam-distilled oil. The major components of N. persica were 4αβ,7α,7aα-nepetalactone (26.5%), cis-β-farnesene (4.4%) and 3,4α-dihydro-4aα,7α,7aα-nepetalactone (3.5%). However, by using supercritical carbon dioxide under optimum conditions, only two components have more than 90.0% of the oil. The extraction yield based on steam distillation was 0.08% (v/w). On the other hand, using SFE extraction yield in the range of 0.22–8.90% (w/w) were obtained at different conditions. The results show that, in Iranian N. persica oil, 4αβ,7α,7aα-nepetalactone is a major component.