Transmission and Reflection of Water-Wave on a Floating Ship in Vast Oceans

In this paper, we study the water-wave flow under a floating body of an incident wave in a fluid. This model simulates the phenomenon of waves abording a floating ship in a vast ocean. The same model, also simulates the phenomenon of fluid-structure interaction of a large ice sheet in waves. According to this method. We divide the region of the problem into three subregions. Solutions, satisfying the equation in the fluid mass and a part of the boundary conditions in each subregion, are given. We obtain such solutions as infinite series including unknown coefficients. We consider a limited number only of the coefficients by truncating the infinite series and satisfy the remaining boundary conditions approximately. Numerical experiments show that the results are acceptable. Tables are given along with the graph of the system of the resulting streamlines and the dynamical pressure acting on the obstacle. The drawn system of streamlines shows the correctness of the solution and the pressure is maximum on the side facing the upstream extremity of the channel. The same procedure can be adequately applied for problems with more complicated geometry and other phenomenon can thus be simulated.     

Mucoadhesive polymeric hydrogels for nasal delivery of acyclovir

The study evaluated different mucoadhesive polymeric hydrogels for nasal delivery of acyclovir. Gels containing poly-N-vinyl-2-pyrrolidone (PVP) were prepared with crosslinking achieved by irradiation with a radiation dose of 15 kGy being as efficient as 20 kGy. Gels containing chitosan and carbopol were also evaluated. The mucoadhesive properties of gels were measured by a modification of a classical tensile experiment, employing a tensile tester and using freshly excised sheep nasal mucosa. Considering the mucoadhesive force, chitosan gel and gel prepared with 3% PVP in presence of polyethylene glycol (PEG) 600 were the most efficient. The in vitro drug release depended on the gel composition. Higher release rates were obtained from PVP gels compared to chitosan or carbopol gels. The release rate of drug from PVP gels was increased further in presence of PEG or glycerol. Histopathological investigations proved that the PVP was a safe hydrogel to be used for mucosal delivery. The PEG in gel formulations caused less damages to the nasal mucosal compared to formulation containing glycerol.     

Hydrogen solid storage: First-principles study of ZrNiH3

The ZrNiH₃ compound is a good candidate for hydrogen storage. In this work we used the first-principles calculation to study this compound. The crystal structures, the electronic properties and the optimization of the internal parameters are treated by the FP-LAPW method implanted in the WIEN2K code. The enthalpies of the dehydrogenation of the ZrNiH₃ compound are calculated. We found that the enthalpy is about −42.89 kJ/mol H, greater but similar to the experimental value of −34.3 kJ/mol H. Potential reasons for this discrepancy are discussed.     

Physiological and biochemical markers in the process of resistance and/or tolerance of heavy metals in the abandoned mining area of Sidi Kamber,Skikda, Algeria

This paper reports the biomonitoring of metallic pollution in the mine of Sidi Kamber Skikda town, to determine the resistance and/or tolerance to Zn, Pb, Cd and Cu in metalliferous plants. During the period of March–May, 2015, soil and plants samples were collected from three different stations in the study area. The total heavy metal fraction was determined by ICP/MS, whereas biochemical markers were determined by spectrophotometric techniques. The results obtained showed high levels of heavy metals in soil and plants compared to international standards. The translocation factor revealed that the studied plants can transfer and/or accumulate metals in their roots or their aerial parts as a function of characteristics of each metal, soil contents and physiological role in the plant. The contents of chlorophyll, proline, total sugars and total proteins are directly influenced by changes in bioavailable contents of heavy metals. It has been found that the plants studied and biomarkers are better suited for phytoremediation and biomonitoring of heavy metals pollution.     

3–5 GHz FSK-OOK ultra wideband transmitter based on memristive ring oscillator

The compatibility of a memristor with CMOS technology has attracted the attention of many researchers to explore its application further. In this work, an ultra low-power and low-complexity ultra wideband (UWB) chirp transmitter based on memristive ring oscillator (RO) is designed in 0.18 µm TSMC CMOS technology. The Chirp waveform was chosen because of its low side-lobes and large time-bandwidth product, which allows for more spectrum use. OOK and FSK modulation are supported by the proposed UWB chirp transmitter. The chirp frequency is controlled linearly with time across the pulse duration using memristors. The binary data "1" and "0" are encoded using distinct chirp frequencies in FSK TX. The simulation results show a maximum TX output pulse of 457 mV _Vpp with a pulse width of 21 ns. The overall DC power consumption for a pulse repetition frequency (PRF) of 20 MHz is 0.328 mW, equivalent to an energy consumption of 16.4 pJ/pulse. The simulated output amplitude for OOK TX is 453 mV Vpp with a pulse width of 48 ns and a PSD of ? 10 dB over a frequency range of 3.2 to 4.8 GHz. The overall power consumption at 10 MHz PRF is 0.136 mW, which corresponds to an energy consumption of 13.6 pJ/pulse.

     

Biosourced vanillin Schiff base platform monomers as substitutes for DGEBA in thermoset epoxy

Diglycidyl ether Schiff base monomers were prepared from vanillin and various diamines. FT-IR, ¹H NMR, ¹³C NMR, and mass spectroscopy were used to determine their structure. Cured thermoset epoxies made with them were compared to commercial epoxy in terms of mechanical properties. Tensile strengths ranged from 35.1 to 60.4 MPa, Young's modulus from 3.9 to 6.9 GPa, similar to the commercial product. The glass transition ranged from 80 to 117°C, the phase transition T_α from 80 to 121°C and the storage modulus from 2 to 3.5 GPa. Thermogravimetric analysis showed that the vanillin-based epoxies were less heat resistant but had higher residual mass (20-30% wt/wt). Hydrolysis, hydrophobicity and degradation were also monitored to evaluate their potential for coating applications.     

Application of ZnO–NiO greenly synthesized nanocomposite adsorbent on the elimination of organic dye from aqueous solutions: Kinetics and equilibrium

Organic dyes are discharged into aquatic systems from several industries causing severe environmental problems and toxicity to aquatic life. Therefore, it should be removed from water with a suitable process. Among several treatment processes, adsorption is one of the most attractive because of its simplicity, efficiency, and low operating cost. Moreover, adsorption supports environmental sustainability if a suitable adsorbent is used. In this work, a green route was followed to prepare ZnO: NiO nanocomposites using the Neem leaf extract as a stabilizing agent instead of harmful chemicals. Four different samples with three different ZnO:NiO ratios were prepared, namely: 3Z:1 N, 1Z:1 N, 1Z:3 N and 1Z:1 N without extract. The samples were characterized by XRD, TEM, SEM, IR, and UV, which all confirmed the successful synthesis of the nanocomposites. The nanocomposites were used for the adsorption of methyl orange (MO) from aqueous solutions. The four nanocomposites prepared with the aid of the extract showed a high sensitivity with 100% removal of MO from 6.25 ppm solutions. Furthermore, all the samples have a relatively fast kinetic with an equilibrium time less than 1 h. Also, the three samples maintained 100% removal efficiency after 5 adsorption-desorption cycles. The difference in particle size distribution obtained for the 1Z:1 N prepared with and without the extract confirms the important rule of the extract as a capping agent with an average size of 18 nm for the sample with the extract and 88 nm for the sample prepared without the extract. This difference in the particle sizes has been reflected on the adsorption performance of the two samples with a maximum adsorption capacity of 33 mg/g for the sample prepared with the extract compared to 6 mg/g for the sample without the extract.     

Molecular Regulation of Canalicular ABC Transporters

The ATP-binding cassette (ABC) transporters expressed at the canalicular membrane of hepatocytes mediate the secretion of several compounds into the bile canaliculi and therefore play a key role in bile secretion. Among these transporters, ABCB11 secretes bile acids, ABCB4 translocates phosphatidylcholine and ABCG5/G8 is responsible for cholesterol secretion, while ABCB1 and ABCC2 transport a variety of drugs and other compounds. The dysfunction of these transporters leads to severe, rare, evolutionary biliary diseases. The development of new therapies for patients with these diseases requires a deep understanding of the biology of these transporters. In this review, we report the current knowledge regarding the regulation of canalicular ABC transporters’ folding, trafficking, membrane stability and function, and we highlight the role of molecular partners in these regulating mechanisms.     

Development and characterisation of (Ni, Cu, Co)-YSZ and Cu-Co-YSZ cermets anode materials for SOFC application

To improve the internal reforming reactions at SOFC anode, alternative (Ni, Cu, Co) -YSZ and Cu-Co-YSZ anode cermets materials are coated by atmospheric plasma spraying (APS). The spray parameters including carrying gas flow rate, spraying distance, argon flow rate and hydrogen flow rate were investigated by an orthogonal experiment to fabricate gas-permeable anode cermets coatings. Scanning electron microscopy and X-ray diffraction are used to characterise the morphology and structure of coated films respectively. The porosity was deduced by the statistical image analysis. By proper selection of the spray parameters to decrease the particles velocity and temperature, the sprayed coatings monometallic and bimetallic ones show that the cross porosity is dependent of metal weight ratio. In fact, when the metal percentage increases, the porosity decreases. Monometallic Ni-YSZ, Cu-YSZ and Co-YSZ cermets with a weight ratio of (3:2) appear to be less porous than those with (1:1) and (2:3) ones respectively, to reach a maximum porosity of 21.57% for Co-YSZ cermet of (2:3) weight ratio. Cu-Co-YSZ bimetallic cermet coating with weight ratio of (0.5:1:2.5) is more porous than those with (1:2:3) and (2:1:2) weight ratios respectively. Its porosity is about 19.15% which is closed to that of Ni-YSZ (2:3) coating. The X-ray diffraction results showed that the metal content in the cermets have a negligible influence on the crystalline phase structure. Such bimetallic materials anode are very interesting because Co diffuses in Cu lattice offering thus, best electronic conductivity, thermal stability and an avoided carbon formation, by replacing Ni with an electron conductor such as Cu that does not catalyze carbon formation.