Synthesis of Dihydrodiol Metabolites of Naphtho[8,1,2- GHI ]Chrysene and Dibenzo[ C,MNO ]Chrysene

Syntheses of naphtho[8,1,2- ghi ]chrysene (naphtho[1,2- e ]pyrene, N[ e ]P) 1 , dibenzo[ c,mno ]chrysene (naphtho[1,2- a ]pyrene, N[ a ]P) 2 and their dihydrodiol metabolites are described. The hydrocarbons N[ e ]P 1 and N[ a ]P 2 and their fjord region dihydrodiols 12 and 19 were synthesized using a Suzuki cross-coupling reaction followed by the appropriate manipulation of the functional groups. The K-region cis dihydrodiols of N[ e ]P-4,5-diol 20 , N[ a ]P-4,5-diol 23 , N[ a ]P-7,8-diol 24 were obtained by OsO 4 oxidation. The cis diols thus obtained were first converted to the corresponding quinones with pyridinium chlorochromate and, finally, to the desired trans dihydrodiols 22 , 27 , and 28 by NaBH 4 reduction. The mixture of trans N[ a ]P-4,5- and 7,8-dihydrodiols was separated by high-performance liquid chromatography.     

Comparison of the Morphological Transforming Activities of Fjord-Region PAHs with Dibenzo[a,e]Pyrene and Benzo[a]Pyrene

The morphological transforming activities in mouse embryo C3H10T1/2CL8 (C3H10T1/2) cells were examined for six PAHs: benzo[c]chrysene (B[c]C); benzo[g]chrysene (B[g]C); benzo[c]phenanthrene (B[c]P); dibenzo[a, l]pyrene (DB[a, l]P); dibenzo[a,e]pyrene (DB[a,e]P) and benzo[a]pyrene (B[a]P). C3H10T1/2 cells treated with B[c]P or B[g]C at concentrations of 0–3 μg/ml did not produce any transformed Type II or III foci after 24 hr of exposure. Concurrent cytotoxicity was observed. Under the same conditions, B[a]P and B[c]C were active, with B[c]C approximately one-half the activity of B[a]P. However, after a 48-hr treatment, B[c]P and B[g]C gave significant activity measured as both foci/dish or the number of dishes exhibiting foci. After a 24-hr treatment, comparison of B[a]P with two dibenzopyrenes, DB[a, l]P and DB[a,e]P, gave activities in the order: DB[a, l]P > B[a]P > DB[a,e]P. After 48 hr of treatment, both B[a]P and DB[a,e]P had similar activities.     

Synthesis of Novel Polyamide-Hyperbranched Polymers via Self Condensing Atom Transfer Radical Polymerization

Novel inimer was synthesized from p-amino phenol via successive preparative methods by using both bromoisobutyrylbromide and acryloyl chloride. The new inimer was well characterized via Infrared Spectra (IR) and ¹ Fréchet , J.M.J. ; Tomalia , D.A. , Ed. Dendrimers and Other Dendritic Polymers , Wiley : West Sussex , 2001 .[Crossref] , [Google Scholar]H nuclear magnetic resonance (NMR). New hyperbranched polyamide (H₁) was prepared via Atom Transfer Radical Polymerization (ATRP). Several reaction conditions (ligands, solvents, temperatures, etc.) were studied. However, the N,N,N′,N″,-pentamethyldiethylenetriamine (PMDETA)/CuBr catalytic system showed good results in toluene at 100°C. Three arm star methylmethacrylate (MMA) homopolymers reacted with (H₁) in different percentages to form copolymers with low polydispersity values, especially at 1:115 for poly MMA:H₁. The formed polymers were characterized via Gel Permeation Chromatography (GPC), ¹ Fréchet , J.M.J. ; Tomalia , D.A. , Ed. Dendrimers and Other Dendritic Polymers , Wiley : West Sussex , 2001 .[Crossref] , [Google Scholar]HNMR, thermal analyses, and Transmission Electron Microscopy (TEM).     

Weather-Induced Degradation of Plastic Pipes

A number of plastic materials, such as unplasticized poly(viny1 chloride) (uPVC), acrylonitrile-butadiene-styrene (ABS), high-density polyethylene (HDPE), poly-(vinylidene fluoride) (PVDF), and chlorinated poly(viny1 chloride) (cPVC), are available for numerous applications. uPVC and HDPE pipes are used in pressurized piping systems in Saudi Arabia for industrial, agricultural, domestic, and general-purpose applications. Some studies have been carried out to investigate the causes of failure in plastic pipes, which is very high in the area. In this chapter an overview of the failure of plastic pipes is presented, with emphasis given to failure of pipes due to severe weather conditions in Saudi Arabia.     

Photocrosslinking of styrene–isoprene–styrene; effect of benzoin and ethylene glycol dimethacrylate on physical properties

Crosslinking reaction of polymer by ultraviolet (UV) irradiation has been important in industries. In this work, photocrosslinking of styrene–isoprene–styrene (SIS) triblock copolymer in the presence of benzoin photoinitiator and a dimethacrylate monomer as crosslinking agent was investigated. Curing of samples was initiated under UV irradiation. Benzoin was used as photoinitiator because it contains chromophore group that could absorb UV irradiation. Ethylene glycol dimethacrylate (EGDMA) was used as crosslinking agent, since it has alkene functional groups that could react with the alkene group of SIS. ATR-FTIR spectra of samples show that absorption band of double bond at 1500–1600?cm^?1 decreases after UV exposure. Increasing the concentration of benzoin (0.1–1?phr) and EGDMA (1–10?phr) leads to an increase in gel content and hardness, while swelling ratio decreases. After 5?min heating at 150?°C, about 20%wt of the unirradiated compound became insoluble, because heating of compound at 150?°C causes crosslinking reaction without any irradiation.     

One-pot synthesis of glucose functionalized multi-walled carbon nanotubes: Dispersion in hydroxylated poly(amide-imide) composites and their thermo-mechanical properties

Multi-wall carbon nanotubes (MWCNTs) were functionalized with glucose using a covalent, non-specific functionalization approach. Fourier-transformed infrared spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM) confirmed that glucose structures were covalently attached to CNTs. Hydroxylated poly(amide-imide) (PAI)-based composites were developed by dispersing of glucose-functionalized MWCNTs (MWCNTs-Gl) as reinforcement in different concentrations varying from 5 to 15 wt.%. Nanocomposites have slightly higher degree of crystallinity than neat PAI and their thermo-oxidative stability was significantly affected by the addition of MWCNTs-Gl. According to mechanical tensile tests, the tensile strength and the Young's modulus of the MWCNT-Gl/PAI composites were increased with increasing MWCNTs-Gl content. The tensile strength remarkably increased from 81 to 129 MPa, which was about 59% higher than that of the neat PAI, with the addition of MWCNT-Gl contents within 15 wt.% and the elongation at break decreased about 0.2% at a 5 wt.% loading of MWCNT-Gl in comparison with the pure PAI film.     

Removal of zinc ions from aqueous solution using a cation exchange resin

The present study is concerned with the mass transfer and kinetics study of zinc ions removal from aqueous solution using a cation exchange resin packed in a rotating cylindrical basket reactor. The effect of various experimental parameters on the rate of zinc ion removal, such as initial zinc ion concentration, packed bed rotation speed and temperature has been investigated. In addition to find a suitable equilibrium isotherm and kinetic model for the zinc ion removal in a batch reactor. The experimental isotherm data were analyzed using the Langmuir, Freundlich and D–R equations. The equilibrium data fit well in the Langmuir isotherm. The experimental data were analyzed using four sorption kinetic models, pseudo-first and second-order equations, the Elovich and the intraparticle diffusion model equation, to determine the best fit equation for the biosorption of zinc ions onto purolite C-100 MH resin. Results show that the Elovich equation provides the best correlation for the biosorption process.     

Extraction conditions for removal of oxidized sulfur compounds in gas oil

An experimental study was conducted to investigate the extraction of oxidized sulfur compounds from gas oil. Solvents used for this purpose included acetone, acetonitrile, methanol and propanol. The effect of solvent concentration, solvent to gas oil ratio, temperature, time and number of stages was studied. To select the best solvent and conditions for extraction, two criteria were considered: high desulfurization and more hydrocarbon recovery. Results showed that extraction time and temperature have no significant effect. Methanol for low ability of extraction of oxidized sulfur compounds and propanol for low hydrocarbon recovery were excluded from further experiments. After the tests, the optimum conditions for extraction were determined to be 85% acetone, solvent/feed ratio of 1, two stages extraction in ambient temperature and enough time for mixing. In this condition 85% of sulfur compounds of gas oil containing 1,670 ppmw S were separated and 95% of gas oil was recovered.     

Effect of surfactant and heat treatment on morphology,surface area and crystallinity in hydroxyapatite nanocrystals

Hydroxyapatite (HA) powders were synthesized by the wet precipitation method, with and without surfactant, under identical processing parameters. These powders were then heat treated at 900 °C for 3 h in air. The detailed characterization of the powders was done by using SEM, dynamic light scattering, nitrogen adsorption, XRD, Raman spectroscopy, and FTIR techniques. The HA phase, identified by well defined PO₄^3? and OH^? ion peaks in Raman and FTIR spectra, was observed in all the powder samples. The addition of surfactant changed the morphology of the particles from spherical to needle/rod-like structure and increased the surface area up to three times (from 33 to 96 m²/g). Also, suppression in the evolution of β-TCP phase was observed along with decrease in the crystal size and crystallinity of the powder due to the addition of surfactant. Synthesized nano-HA crystals were found to have diameters and lengths in the range 10–25 nm and 75–150 nm, respectively. The heat treatment changed the architecture of the particles, increased the crystallinity and reduced the surface area to ≈7 m²/g. However, the relative increase in crystallinity was much higher for the powder synthesized with surfactant. The ratio of the average crystallite size to the crystallinity degree was about 0.53±0.07 for all the powders. The particle size distribution was bimodal and coarser for the powder synthesized without surfactant. The pore size analysis showed transformation of a predominantly mesoporous structure into a meso- plus macroporous one on heat treatment. The intensity of OH^? group peak in Raman spectra was found to be highly sensitive to the crystalline state of the HA powder and may be used to assess crystallinity.