Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.     

Bi-supported Ziegler–Natta TiCl4/MCM-41/MgCl2 (ethoxide type) catalyst preparation and comprehensive investigations of produced polyethylene characteristics

Bi-supported Ziegler–Natta catalysts (TiCl₄/MCM-41/MgCl₂ (ethoxide type)) were synthesized to improve the morphology and the properties of polyethylene. The morphology control is a crucial issue in polymerization process, while tailoring the properties of polymers is needed for specific applications. The catalysts were synthesized in different ratios of two supports with impregnation method. The polymerization process was carried out in atmospheric slurry reactor. The catalysts were characterized with scanning electron microscopy - energy dispersive X-ray spectroscopy (SEM–EDX), inductively coupled plasma, Fourier transform infrared spectrometry (FTIR), and Brunauer-Emmett-Teller (BET) methods. The polymers were analyzed with scanning electron microscopy (SEM), thermogravimetric analysis (TGA), differential scanning calorimetry, FTIR, and tensile-strength analyses. Ubbelohde viscometer and frequency sweep measurements showed that the synthesized polymers are ultra-high-molecular-weight polyethylene. Mechanical properties of polymers showed higher Young's modulus in samples containing MCM-41, having higher thermal stability supported by TGA analysis. SEM images of bi-supported catalyst showed a controlled spherical morphology with uniform size distribution. SEM analysis support that the polymers replicate their morphology from catalyst, improving their morphology comparing to MgCl₂-supported catalyst. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48553.     

Optimization of a continuous ultrasound assisted oxidative desulfurization (UAOD) process of diesel using response surface methodology (RSM) considering operating cost

A continuous-flow ultrasound-assisted oxidative desulfurization(UAOD) of partially hydro-treated diesel has been investigated using hydrogen peroxide-formic acid as simple and easy to apply oxidation system. The effects of different operating parameters of oxidation stage including residence time(2–24 min), formic acid to sulfur molar ratio(10–150), and oxidant to sulfur molar ratio(5–35) on the sulfur removal have been studied using response surface methodology(RSM) based on Box–Behnken design. Considering the operating costs of the continuous-flow oxidation stage including chemical and electrical energy consumption, the appropriate values of operating parameters were selected as follows: residence time of 16 min, the formic acid to sulfur molar ratio of 54.47, and the oxidant to sulfur molar ratio of 8.24. In these conditions, the sulfur removal and the volume ratio of the hydrocarbon phase to the aqueous phase were 86.90% and 4.34, respectively. By drastic reduction in the chemical consumption in the oxidation stage, the volume ratio of the hydrocarbon phase to the aqueous phase was increased up to 10. Therefore, the formic acid to sulfur molar ratio and the oxidant to sulfur molar ratio were obtained 23.64 and 3.58, respectively, which lead to sulfur removal of 84.38% with considerable improvements on the operating cost of oxidation stage in comparison with the previous works.     

Nutritional constituents and antioxidant properties of indigenous kembayau (Dacryodes rostrata (Blume) H. J. Lam) fruits

The nutritional and antioxidant properties of peels, pulp and seeds of kembayau (Dacryodes rostrata) fruits were evaluated. Kembayau seeds and pulp were rich in fat, while peels had the highest ash contents. Potassium was the most prevalent mineral in peels (380.72-1112.00 mg/100 g). In kembayau fruits, total flavonoid content (1012.74-28,022.28 mg rutin equivalent/100 g) was higher than total phenolic and total monomeric anthocyanin contents. Kembayau seeds exhibited high flavonoid and phenolic contents compared to the contents in peels and pulp. Antioxidant capacities were also higher in seeds as typified by trolox equivalent antioxidant capacity assay (51.39-74.59 mmol TE/100 g), ferric reducing antioxidant power assay (530.05-556.98 mmol Fe²⁺/100 g) and by 1,1-diphenyl-2-picryl hydrazyl radical scavenging activity (92.18-92.19%) when compared to peels and pulp. Pulp and peels of kembayau fruit may be an important source of energy and minerals for human consumption, while seeds have a good potential as antioxidants.     

Assessment of in vitro antioxidant, antibacterial and immune activation potentials of aqueous and ethanol extracts of Phyllanthus niruri

BACKGROUND: Recently much attention has been paid to biologically active plants because of their low production cost and fewer adverse effects compared with chemical drugs. In the present investigation the bioactivity of Phyllanthus niruri ethanol and aqueous extracts was evaluated in vitro. RESULTS: The ethanol extract of P. niruri showed a high level of flavonoid content (123.9 ± 0.002 mg g^?1), while the aqueous extract showed the highest 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH; IC₅₀6.85 ± 1.80 µmol L^?1) and 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid) (ABTS; 46.44 ± 0.53 µmol L^?1) free radical scavenging activities with high phenol content (376 ± 0.02 mg g^?1) and elevated levels of ferric reducing antioxidant power (FRAP; 23 883 ± 0.019 mmol g^?1) with excellent antibacterial activity against Staphylococcus aureus (20 mm inhibition zone) and Streptococcus agalactiae (12 mm inhibition zone), respectively, in addition to the best immune activation potential of human peripheral blood mononuclear cells (450.5%). CONCLUSIONS: It is clear from our results that both extracts of P. niruri has excellent bioactivity roles via elevated levels of antibacterial, antioxidant and percentage of peripheral blood mononuclear cell proliferation, which could lead to the development of medications for clinical use. Copyright © 2012 Society of Chemical Industry     

ZnIn2S4/g-C3N4 Nanocomposite for Proficient Elimination of Hg (II) under Visible Light

Journal of Inorganic and Organometallic Polymers and Materials - The present work offers beneficial method for Hg (II) elimination from aqueous solution. ZnIn2S4/g-C3N4 nanocomposites were...     

Compositional analysis and rheological characterization of gum tragacanth exudates from six species of Iranian Astragalus

The sugar composition and viscoelastic behaviour of Iranian gum tragacanth exuded by six species of Astragalus was investigated at a concentration of 1.3% and varying ionic strength using a controlled shear-rate rheometer. Compositional analysis of the six species of gum tragacanth by high-performance anion-exchange chromatography with pulsed amperometric detection suggested the occurrence of arabinose, xylose, glucose, galactose, fucose, rhamnose and galacturonic acid residues in the gum structure; however, the proportions of each sugar varied significantly among the gums from the different species of Astragalus, and this variation led to interesting differences in functional properties. Rheological measurements performed on dispersions of the six species of gum tragacanth demonstrated viscoelastic properties. The mechanical spectra derived from strain sweep and frequency sweep measurements indicated that the different gum tragacanth dispersions had distinctive viscoelastic behaviours. Investigation of the viscoelastic properties of the different gum dispersions in the presence of NaCl revealed that the addition of NaCl could lead to slight to drastic decreases in the G′, G″ or η^∗ values of the various gums. In general, the results indicated that the six varieties of gum tragacanth studied exhibited significantly different rheological properties; therefore, these different gums may find use in a variety of applications as stabilisers, thickeners, emulsifiers and suspending agents depending on their rheological behaviour.     

Emergence of Antibiotic Resistance in Listeria monocytogenes Isolated from Food Products: A Comprehensive Review

Listeria monocytogenes is an opportunistic pathogen that has been involved in several deadly illness outbreaks. Future outbreaks may be more difficult to manage because of the emergence of antibiotic resistance among L. monocytogenes strains isolated from food products. The present review summarizes the available evidence on the emergence of antibiotic resistance among L. monocytogenes strains isolated from food products and the possible ways this resistance has developed. Furthermore, the resistance of food L. monocytogenes isolates to antibiotics currently used in the treatment of human listeriosis such as penicillin, ampicillin, tetracycline, and gentamicin, has been documented. Acquisition of movable genetic elements is considered the major mechanism of antibiotic resistance development in L. monocytogenes. Efflux pumps have also been linked with resistance of L. monocytogenes to some antibiotics including fluoroquinolones. Some L. monocytogenes strains isolated from food products are intrinsically resistant to several antibiotics. However, factors in food processing chains and environments (from farm to table) including extensive or sub‐inhibitory antibiotics use, horizontal gene transfer, exposure to environmental stresses, biofilm formation, and presence of persister cells play crucial roles in the development of antibiotic resistance by L. monocytogenes.