Input-parallel output-parallel configuration of boost half bridge DC-DC converter with control strategy

The concept of connecting two boost half bridge DC-DC converter modules in input-paral- lel output-parallel configuration is presented. The input-parallel-output-parallel （IPOP） converter consists of multiple boost half bridge （BHB） DC-DC converter modules which are connected in par- allel at the input and output side. This kind of converter is an attractive solution for high power ap- plications. The correlation between input current sharing （ICS） and output current sharing （OCS） of the IPOP converter basic modules is described. Two loop control strategies, consisting of input cur- rent loop and output voltage loop, have been developed to achieve equal ICS and OCS in this present work. The control strategy for the IPOP configuration of boost haft bridge DC-DC converter has been verified for different load conditions （half load and full load）, The IPOP system proposed here is comprising of two modules but it can be extended to three or more. The performance of the pro- posed system along with the control strategy is verified by simulation in MATLAB using Simpower tool. Finally the satisfactory simulation results are obtained.     

Design and energy absorption enhancement of vehicle hull under high dynamic loads

V-shape hulls are widely used in peacekeeping efforts such as demining vehicles in order to deflect the blast energy and reduce the effects of mine blast. Blast resistant design and energy absorption enhancement of V-shape plates were carried out using finite element analysis package ABAQUS. Various geometries of V-shape plates with and without interlayer of materials like Al-foams and honeycomb were employed to analyze their effects on the deformation of the plate and applied stresses and strains. The results obtained show that application of metallic foams leads to better response of the plate and consequently results in more energy dissipation, less dame to vehicle and enhances crew survivability.     

Nanofabrication of hybrid nanomaterials: Macroscopically aligned nanoparticles pattern via directed self-assembly of block copolymers

Periodic hybrid nanostructured materials based on aligned inorganic nanoparticles within self-assembled copolymer matrixes aimed to harness the collective properties of generated functional nanomaterials. The nanoparticles are desirable for their useful magnetic, optical, catalytic, and electronic properties owed to the quantum confinement effect. For instance, gold, palladium and platinum as nanoparticles, have shown significant change in the physiochemical properties in comparison to their bulk materials. If the nanoparticles are aligned into well-defined macroscopic periodic nanostructures in diverse of morphologies, the unique collective properties are significantly enhanced. These unique properties can be transformed to improve the performance of storage media, multi-contact tracks solar panels and optoelectronic devices. Within this review, the nanofabrication tools will be presented as an alternative route to conventional top-down methods for the fabrication of periodic nanostructured hybrid materials. A simple approach is reviewed to fabricate periodic nanostructured hybrid systems based on the directed assembly of inorganic nanoparticles into well-defined periodic three-dimensional nanostructures provided by the self-assembling ability of block copolymers. The fabrications of varieties morphologies and the formation mechanism at different dimensions will be discussed as well as the characterization techniques. Finally, several applications of the proposed hybrid nanostructures are highlighted for the next generation of miniaturized devices.     

Effect of Talc Filler on Physical Properties of Polyurethane Rigid Foams

This article reports on the properties of polyurethane rigid foams, which are used as insulating materials. Most polyurethane rigid foams, derived from cellular polymers, are unstable and tend to crack when acted upon by external forces. These foams are classified as a subgroup of cellular polymers, and thus their low stabilization levels can be partly explained by the fact that they contain cells. In these experiments, we attempted to add talc, to polyurethane rigid foams, as a filler, in an attempt to investigate its effect on the physical properties of the constructed foams in both horizontal and vertical directions. Physical and comparative tests were performed on various compositions of polyurethane foam to chart their insulating capabilities, and our comparative analysis indicated that advances had been achieved with respect to some of its properties.     

Starch,Sucrose, and Rezol® IL800 as Density Modifiers for Polyurethane Rigid Foams Formulated by Recycled Polyol

Waste polyurethane rigid foam (PUF) is recycled by the glycolysis process. The recycled product is used in a polyol blend, applied in a new foam formulation. Polyurethane rigid foams formulated by recycled polyols are highly dense compared to rigid foams formulated by virgin polyols. As these foams are mostly used in insulation, they make an extra mass to the main product or system that is insulated. Therefore, it is important to decrease their density as much as possible.

Some density modifiers such as starch, sucrose, and REZOL^® IL800 were investigated to recognize their effect on PUF's density.     

Photocrosslinking of styrene–isoprene–styrene; effect of benzoin and ethylene glycol dimethacrylate on physical properties

Crosslinking reaction of polymer by ultraviolet (UV) irradiation has been important in industries. In this work, photocrosslinking of styrene–isoprene–styrene (SIS) triblock copolymer in the presence of benzoin photoinitiator and a dimethacrylate monomer as crosslinking agent was investigated. Curing of samples was initiated under UV irradiation. Benzoin was used as photoinitiator because it contains chromophore group that could absorb UV irradiation. Ethylene glycol dimethacrylate (EGDMA) was used as crosslinking agent, since it has alkene functional groups that could react with the alkene group of SIS. ATR-FTIR spectra of samples show that absorption band of double bond at 1500–1600?cm^?1 decreases after UV exposure. Increasing the concentration of benzoin (0.1–1?phr) and EGDMA (1–10?phr) leads to an increase in gel content and hardness, while swelling ratio decreases. After 5?min heating at 150?°C, about 20%wt of the unirradiated compound became insoluble, because heating of compound at 150?°C causes crosslinking reaction without any irradiation.     

Optimization of process parameters using D-optimal design for synthesis of ZnO nanoparticles via sol–gel technique

The experimental conditions for the synthesis of ZnO nanoparticles to produce minimal size were optimized using the D-optimal design. The influence of process parameters involves molar ratio of the starting materials, pH and the calcination temperature on the particle size were evaluated using the polynomial regression. The optimum conditions revealed by the model for obtaining a minimum particle size of ZnO were predicted to have a molar ratio of 1.76, pH of 1.50 and calcination at 402.2 °C. The obtainable particle size upon applying the model is 22.9 nm in compare to experimental result of 18 ± 2 nm was obtained.