The Impact of Sub-Millisecond Damage Fixation Kinetics on the In Vitro Sparing Effect at Ultra-High Dose Rate in UNIVERSE

The impact of the exact temporal pulse structure on the potential cell and tissue sparing of ultra-high dose-rate irradiation applied in FLASH studies has gained increasing attention. A previous version of our biophysical mechanistic model (UNIVERSE: UNIfied and VERSatile bio response Engine), based on the oxygen depletion hypothesis, has been extended in this work by considering oxygen-dependent damage fixation dynamics on the sub-milliseconds scale and introducing an explicit implementation of the temporal pulse structure. The model successfully reproduces in vitro experimental data on the fast kinetics of the oxygen effect in irradiated mammalian cells. The implemented changes result in a reduction in the assumed amount of oxygen depletion. Furthermore, its increase towards conventional dose-rates is parameterized based on experimental data from the literature. A recalculation of previous benchmarks shows that the model retains its predictive power, while the assumed amount of depleted oxygen approaches measured values. The updated UNIVERSE could be used to investigate the impact of different combinations of pulse structure parameters (e.g., dose per pulse, pulse frequency, number of pulses, etc.), thereby aiding the optimization of potential clinical application and the development of suitable accelerators.     

Sparse representation based facial image compression via multiple dictionaries and separated ROI

Multimedia Tools and Applications - Constant increasing of visual information necessitates most efficient image compression schemes for saving storage space or reducing required transmission...     

Providing a Way to Create Balance Between Reliability and Delays in SDN Networks by Using the Appropriate Placement of Controllers

Wireless Personal Communications - Computer networks covered the entire world and a serious and new development has not formed for many years. But companies and consumer organizations complain...     

Virtual Machine Consolidation in Cloud Computing Systems: Challenges and Future Trends

Wireless Personal Communications - Cloud Computing Systems (CCSs) provides a computing capability through the Internet. It enables organizations or individuals to have a computing power without...     

Investigation the impact of additives on the displacement of the onset point of asphaltene precipitation using interfacial tension measurement

The purpose of this study is to explore the impact of additives on the displacement of the onset point of asphaltene precipitation in crude oil using the interfacial tension measurement method, based on the examined oil has been taken from Iran reservoirs. The experimental results suggest that the addition of surfactants of dodecyl benzene sulfonic acid (DBSA) and coconut diethanolamide (CDEA) to the oil has triggered the onset of asphaltene precipitation. These findings imply that CDEA has a more effective role in preventing asphaltene precipitation. Also, it was observed that increasing the concentration of the surfactants has led to obtaining greater results. Finally, critical micelle concentration was calculated to be 5000 and 4700 ppm in the cases of CDEA and DBSA, respectively.     

Microwave-assisted combustion synthesis of ZnAl2O4 and ZnO nanostructure particles for photocatalytic wastewater treatment

ZnAl₂O₄ and ZnO nanostructure particles and in situ crystallization of zinc aluminate and zinc oxide coating layers on sintered α-Al₂O₃ and γ-Al₂O₃ granules by the microwave-assisted combustion method were investigated. For powders, the effects of solution pH value and for coated samples the influence of support type on the structure, microstructure, and photocatalytic activity of powders were studied. Results showed that variation of synthesis pH value caused to considerable change in agglomeration, specific surface area, obtaining up to 88 and 92% yields for zinc aluminate and zinc oxide nanoparticles, respectively. γ-alumina granules were more appropriate supports than the α-alumina ones because of the better photocatalytic activities and lower extent of the attritions for both zinc aluminate and zinc oxide coating layers.     

Low-power CMOS distributed amplifier using new cascade gain cell for high and low gain modes

A CMOS distributed amplifier (DA) with low-power and flat and high power gain (S₂₁) is presented. In order to decrease noise figure (NF) an RL terminating network used for the gate transmission line instead of single resistance. Besides, a flat and high S₂₁ is achieved by using the proposed cascade gain cell consist of a cascode-stage with bandwidth extension capacitor. In the high-gain mode, under operation condition of V _dd  = 1.2 V and the overall current consumption of 7.8 mA, simulation result shown that the DA consumed 9.4 mW and achieved a flat and high S₂₁ of 20.5 ± 0.5 dB with an average NF of 6.5 dB over the 11 GHz band of interest, one of the best reported flat gain performances for a CMOS UWB DA. In the low-gain mode, the DA achieved average S₂₁ of 15.5 ± 0.25 dB and an average NF of 6.6 dB with low power consumption (P_DC) of 3.6 mW, the lowest P_DC ever reported for a CMOS DA or LNA with an average gain better than 10 dB.     

Polyurethane-SAPO-34 mixed matrix membrane for CO2/CH4 and CO2/N2 separation

SAPO-34 nanocrystals (inorganic filler) were incorporated in polyurethane membranes and the permeation properties of CO₂, CH_4, and N₂ gases were explored. In this regard, the synthesized PU-SAPO-34 mixed matrix membranes (MMMs) were characterized via SEM, AFM, TGA, XRD and FTIR analyses. Gas permeation properties of PU-SAPO-34 MMMs with SAPO-34 contents of 5 wt%, 10 wt% and 20 wt% were investigated. The permeation results revealed that the presence of 20 wt% SAPO-34 resulted in 4.45%, 18.24% and 40.2% reductions in permeability of CO_2, CH_4, and N₂, respectively, as compared to the permeability of neat polyurethane membrane. Also, the findings showed that at the pressure of 1.2 MPa, the incorporation of 20 wt% SAPO-34 into the polyurethane membranes enhanced the selectivity of CO₂/CH₄ and CO₂/N₂, 14.43 and 37.46%, respectively. In this research, PU containing 20 wt% SAPO-34 showed the best separation performance. For the first time, polynomial regression (PR) as a simple yet accurate tool yielded a mathematical equation for the prediction of permeabilities with high accuracy (R² > 99%).     

Material encapsulation in poly(methyl methacrylate) shell: A review

Material encapsulation is a relatively new technique for coating a micro/nanosize particle or droplet with polymeric or inorganic shell. Encapsulation technology has many applications in various fields including drug delivery, cosmetic, agriculture, thermal energy storage, textile, and self-healing polymers. Poly(methyl methacrylate) (PMMA) is widely used as shell material in encapsulation due to its high chemical stability, biocompatibility, nontoxicity, and good mechanical properties. The main approach for micro/nanoencapsulation of materials using PMMA as shell comprises emulsion-based techniques such as emulsion polymerization and solvent evaporation from oil-in-water emulsion. In the present review, we first focus on the encapsulation techniques of liquid materials with PMMA shell by analyzing the effective processing parameters influencing the preparation of PMMA micro/nanocapsules. We then describe the morphology of PMMA capsules in emulsion systems according to thermodynamic relations. The techniques to investigation of mechanical properties of capsule shell and the release mechanisms of core material from PMMA capsules were also investigated. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48039.