弯曲受力时中空管以及混凝土填充纤维复合管的有限元模型:部分填充优化和杆设计方法

非线性有限元模型的拓展与验证在相关的论文(Son J,Fam A.中空管以及混凝土填充纤维复合管的有限元模型:第一部分——抗弯模型拓展与验证)中已被用于研究部分填充混凝土纤维增强复合材料线杆的抗弯性能。为提高抗弯强度和稳定性,建议采用部分填充厚壁管来降低造价。对不同直径与厚度比以及不同分层结构的悬臂单杆进行混凝土部分填充长度优化。研究发现,当下列任意一种情况出现时,优化长度会减少:当直径与厚度比变小时;当纤维角度相对于弯曲管纵向轴夹角增加时;当弯曲管中纵向纤维减少时;当采用侧向分布荷载代替端部集中荷载时。建立了计算中空管和混凝土填充FRP管承载力矩的简单表达式,基于同时发生在中空管和混凝土填充管处的破坏,结合简单的设计方法体系来优化混凝土填充管的长度。同时提出了计算锥形线杆的程序。     

Arsenic groundwater contamination and its health effects in the state of Uttar Pradesh (UP) in upper and middle Ganga plain, India: a severe danger

This communication presents results of our 2-year survey on groundwater arsenic contamination in three districts Ballia, Varanasi and Gazipur of Uttar Pradesh (UP) in the upper and middle Ganga plain, India. Analyses of 4,780 tubewell water samples revealed that arsenic concentrations in 46.5% exceeded 10 microg/L, in 26.7%, 50 microg/L and in 10% 300 microg/L limits. Arsenic concentrations up to 3,192 microg//L were observed. The age of tubewells (n=1,881) ranged from less than a year to 32 years, with an average of 6.5 years. Our study shows that older tubewells had a greater chance of contamination. Depth of tubewells (n=3,810) varied from 6 to 60.5 m with a mean of 25.75 m. A detailed study in three administrative units within Ballia district, i.e. block, Gram Panchayet, and village was carried out to assess the magnitude of the contamination. Before our survey the affected villagers were not aware that they were suffering from arsenical toxicity through contaminated drinking water. A preliminary clinical examination in 11 affected villages (10 from Ballia and 1 from Gazipur district) revealed typical arsenical skin lesions ranging from melanosis, keratosis to Bowens (suspected). Out of 989 villagers (691 adults, and 298 children) screened, 137 (19.8%) of the adults and 17 (5.7%) of the children were diagnosed to have typical arsenical skin lesions. Arsenical neuropathy and adverse obstetric outcome were also observed, indicating severity of exposure. The range of arsenic concentrations in hair, nail and urine was 137-10,900, 764-19,700 microg/kg, and 23-4,030 microg/L, respectively. The urine, hair and nail concentrations of arsenic correlated significantly (r=0.76, 0.61, and 0.55, respectively) with drinking water arsenic concentrations. The similarity to previous studies on arsenic contamination in West Bengal, Bihar and Bangladesh indicates that people from a significant part of the surveyed areas in UP are suffering and this will spread unless drives to raise awareness of arsenic toxicity are undertaken and an arsenic safe water supply is immediately introduced.     

Precision control of a piezo-actuated micro telemanipulation system

Piezoelectric actuators are widely used in micro manipulation applications. However hysteresis nonlinearity limits accuracy of these actuators. This paper presents a novel approach for utilizing a piezoelectric nano-stage as slave manipulator of a teleoperation system. The Prandtl-Ishlinskii (PI) model is used to model actuator hysteresis in feedforward scheme to cancel out this nonlinearity. To deal with the influence of parametric uncertainties, unmodeled dynamics, and PI identification error a perturbation term is added to the slave model and apply a sliding mode based impedance control with perturbation estimation. The stability of the entire system is guaranteed by Llewellyn’s absolute stability criterion. Performance of the proposed controllers is verified through experiments.     

Micro‐morphological,environmental and phytochemical investigation of herbal medicines by using LM and SEM: A quality control tool

The use of quality control tool for authentication of Jadwar (Delphinium denudatum Wall. ex Hook.f. & Thomson), a folk herbal drug used for the treatment of different ailments, was studied. People face problems of adulteration for this drug at global, regional, national and local levels. Two different plant species are commercially marketed in the Indo‐Pak Subcontinent under the same trade name of Jadwar. One is D. denudatum Wall. ex Hook.f. & Thomson and the other is Aconitum heterophyllum Wall. ex Royle. To focus on this problem, a marketable available drug sample of Jadwar was authenticated by using basic microscopy tools (LM) and advanced chemo‐taxonomic markers. Authentication, quality and standardization of this drug was achieved using morphology, organoleptography, UV and IR analyses, scanning electron microscopy of pollen and anatomical investigations. The techniques used for authentication marked the clear difference between the studied plants. Microscopic studies, chemotaxonomic investigation and other techniques used in this project provided the basis for the authentication of this species.     

In-Process Monitoring of Nickel-Based Super Alloy Grinding Using the Acoustic Emission Method

Russian Journal of Nondestructive Testing - One of the most prevalent problems in grinding nickel-based super alloys is grinding wheel loading phenomenon which is the chip accumulation in free...     

Mathematical Behavior of Optical Density of γ-Ray Radiography Images of Steel Pipes

Russian Journal of Nondestructive Testing - The purpose of this article is to determine the mathematical function of the optical behavior of radiographic films/images produced by gamma-ray...     

Design and implementation of tuned viscoelastic dampers for vibration control in milling

Passive means of vibration attenuation have been employed successfully and efficiently in machining systems such as turning and milling. Traditional approach to controlling vibration in a milling system is to develop control mechanisms for cutting tools or machine spindles. However, due to the nature of milling operations where the cutting tools rotate at high speed, the passive vibration control methods find very limited application with the traditional approach. In order to utilise the potential of the passive vibration control methodology in milling applications, the milling operation should be viewed as a system comprising an elastic structure and operation parameters. Dynamics of this closed-loop system should improve with improvement in dynamics of any of the system components, especially within the elastic structure that comprises the cutting tool, the machine tool, the workholding system and the workpiece. Although the level of improvement will vary depending on which component of the elastic chain is targeted for this purpose. This paper presents the development and testing of tuned viscoelastic dampers (TVDs) for vibration control through their application on a workpiece in milling operations. This work targets workpiece held on a palletised workholding system for the control of unwanted vibration and thus deviates from the traditional approach where cutting tool and/or machine spindles are targeted for vibration control strategies. Palletised workholding systems, due to their compact design, offer an opportunity to design passive damping mechanisms that are easier to implement in the case of a milling system. The TVD developed through this research is based on a commercially available viscoelastic damping polymer. Advantage of such materials is their high damping performance over a wide range of excitation frequencies. The TVD design process has used a unique combination of analytical modelling with experimental FRF data. Modal impact testing showed that the application of the TVD reduced the amplitude of vibration acceleration by 20 dB for the target mode. Since the target mode corresponded to torsional vibration, the TVD was effective in two planar coordinates, i.e. X and Y. In addition, the TVD also significantly reduced the amplitude of a vibration mode far from the mode it was designed for. The system has been tested experimentally to demonstrate significant reduction in vibration amplitudes during a milling process. The milling tests with different combinations of cutting parameters show that multi-TVD approach is always valid regardless of the parameters being used. The only requirement for TVDs to function effectively is that the natural frequency of the system, for which the TVDs are designed, is excited during the milling process.     

1-O-alkyl-2-(ω-oxo)acyl-sn-glycerols from shark oil and human milk fat are potential precursors of PAF mimics and GHB

This study examines the feasibility that peroxidation and lipolysis of 1-O-alkyl-2,3-diacyl-sn-glycerols (DAGE) found in shark liver oil and human milk fat constitutes a potential source of dietary precursors of platelet activating factor (PAF) mimics and of gamma-hydroxybutyrate (GHB). Purified DAGE were converted into 1-O-alkyl-2-acyl-sn-glycerols by pancreatic lipase, without isomerization, and transformed into 1-O-alkyl-2-oxoacyl-sn-glycerols by mild autooxidation. The various core aldehydes without derivatization, as well as the corresponding dinitrophenylhydrazones, were characterized by chromatographic retention time and diagnostic ions by online electrospray mass spectrometry. Core aldehydes of oxidized shark liver oil yielded 23 molecular species of 1-O-alkyl-sn-glycerols with short-chain sn-2 oxoacyl groups, ranging from 4 to 13 carbons, some unsaturated. Autooxidation of human milk fat yielded 1-O-octadecyl-2-(9-oxo)nonanoyl-sn-glycerol, as the major core aldehyde. Because diradylglycerols with short fatty chains are absorbed in the intestine and react with cytidine diphosphate-choline in the enterocytes, it is concluded that formation of such PAF mimics as 1-O-alkyl-2-(ω-oxo)acyl-sn-glycerophosphocholine from unsaturated dietary DAGE is a realistic possibility. Likewise, a C₄ core alcohol produced by aldol-keto reduction of a C₄ core aldehyde constitutes a dietary precursor of the neuromodulator and recreational drug GHB, which has not been previously pointed out.     

Solubility Limit of MgO in Al2O3 at 1600°C

The solubility of Mg in alumina was measured using wavelength-dispersive spectroscopy mounted on a scanning electron microscope. Careful calibration of the microscope's working conditions was performed in order to optimize the detection limit and accuracy. Measurements were conducted on water-quenched and furnace-cooled samples, without any thermal or chemical etching to avoid alteration of the bulk concentration. The results indicate the solubility limit of Mg in alumina to be 132±11 ppm at 1600°C.