Coordinated design of TCSC and PSS controllers using VURPSO and Genetic algorithms for multi-machine power system stability

Thyristor controlled series capacitor (TCSC) can regulate line impedance and therefore increase transferred power of the system. On the other hand power system stabilizer (PSS) increases dynamic stability of generator. To enhance the stability, combination of TCSC and PSS can be applied, and in such a case coordination of TCSC and PSS is essential. This paper applies this combined controller in order to enhance the stability of multi-machine system. Parameters of these controllers are optimized by velocity update relaxation particle swarm optimization (VURPSO) algorithm and Genetic algorithm (GA). The simulation results show that the combination of VURPSO algorithm and GA leads to a better design and stability.     

Fast implementation of dense stereo vision algorithms on a highly parallel SIMD architecture

In this paper, we present faster than real-time implementation of a class of dense stereo vision algorithms on a low-power massively parallel SIMD architecture, the CSX700. With two cores, each with 96 Processing Elements, this SIMD architecture provides a peak computation power of 96 GFLOPS while consuming only 9 Watts, making it an excellent candidate for embedded computing applications. Exploiting full features of this architecture, we have developed schemes for an efficient parallel implementation with minimum of overhead. For the sum of squared differences (SSD) algorithm and for VGA (640 × 480) images with disparity ranges of 16 and 32, we achieve a performance of 179 and 94 frames per second (fps), respectively. For the HDTV (1,280 × 720) images with disparity ranges of 16 and 32, we achieve a performance of 67 and 35 fps, respectively. We have also implemented more accurate, and hence more computationally expensive variants of the SSD, and for most cases, particularly for VGA images, we have achieved faster than real-time performance. Our results clearly demonstrate that, by developing careful parallelization schemes, the CSX architecture can provide excellent performance and flexibility for various embedded vision applications.     

A Model for Locating Park-and-Ride Facilities on Urban Networks Based on Maximizing Flow Capture: A Case Study of Isfahan, Iran

Traffic congestion is one of the main problems in large cities for which several approaches have been proposed. Park-and-ride is one of the best approaches that can remove traffic from the traffic network. Park-and-ride facilities are an important part of urban mass transit systems, effectively extending the service area and attracting commuters and other people who may not otherwise have used mass transit. However, its efficiency depends on its location in the urban network. In this research, we focus on travel time of shortest paths instead of the distance criterion for computing network traffic and develop a model for finding the best location(s) for siting park-and-ride systems so as to minimize the network traffic. The model is formulated based on population points, potential sites for park-and-ride establishment, and several Central Business District (CBDs). Then we present a Genetic algorithm that has been proved to be efficient in solving large size problems. Finally, the proposed model is used to locate park-and-ride facilities in the city of Isfahan, Iran.     

An efficient numerical algorithm for the study of time fractional Tricomi and Keldysh type equations

Engineering with Computers - This work addresses a hybrid scheme for the numerical solutions of time fractional Tricomi and Keldysh type equations. In proposed methodology, Haar wavelets are used...     

Electrical and Dielectric Properties of Y<Superscript>3+</Superscript>-Substituted Barium Hexaferrites

In this study, Y³⁺ ion-substituted M-type barium hexaferrites (BaM; BaFe₁₂O₁₉) were fabricated via facile ceramic route. As-prepared powders were characterized by X-ray powder diffractometry (XRD), Fourier transform infrared (FT-IR) spectroscopy, and impedance spectroscopy. XRD (Rietveld) analyses confirmed the presence of a single characterization of all samples (except x = 0.0 and 0.1 samples). The crystallite sizes of products are found in the range of 47.2–63.2 nm. Spectral analysis (FT-IR) also presented the formation of spinel structure for all products. The ac conductivity of the substituted samples was found to initially decrease slightly with increase in Y³⁺ compared with unsubstituted, and then variation tendency changes at the medium substitution ranges are observed with a different attitude against temperature. In the end, the lower conductivity for high substitutions is recorded and increases as functions of frequency while it also increases with the elevation of temperature. It was observed that ac conductivities of products increased by increasing frequency which indicate that observed ac conductivity is due to both electronic and polaron hopping mechanism.     

Adaptive neuro-fuzzy inference system multi-objective optimization using the genetic algorithm/singular value decomposition method for modelling the discharge coefficient in rectangular sharp-crested side weirs

In the present article, the adaptive neuro-fuzzy inference system (ANFIS) is employed to model the discharge coefficient in rectangular sharp-crested side weirs. The genetic algorithm (GA) is used for the optimum selection of membership functions, while the singular value decomposition (SVD) method helps in computing the linear parameters of the ANFIS results section (GA/SVD-ANFIS). The effect of each dimensionless parameter on discharge coefficient prediction is examined in five different models to conduct sensitivity analysis by applying the above-mentioned dimensionless parameters. Two different sets of experimental data are utilized to examine the models and obtain the best model. The study results indicate that the model designed through GA/SVD-ANFIS predicts the discharge coefficient with a good level of accuracy (mean absolute percentage error?=?3.362 and root mean square error?=?0.027). Moreover, comparing this method with existing equations and the multi-layer perceptron–artificial neural network (MLP-ANN) indicates that the GA/SVD-ANFIS method has superior performance in simulating the discharge coefficient of side weirs.     

Green synthesis of silver nanoparticles using Glaucium corniculatum (L.) Curtis extract and evaluation of its antibacterial activity

The metal nanoparticles, due to interesting features such as electrical, optical, chemical and magnetic properties, have been investigated repeatedly. Also, the mentioned nanoparticles have specific uses in terms of their antibacterial activity. The biosynthesis method is more appropriate than the chemical method for producing the nanoparticles because it does not need any special facilities; it is also economically affordable. In the current study, the silver nanoparticles (AgNPs) were obtained by using a very simple and low‐cost method via Glaucium corniculatum (L.) Curtis plant extract. The characteristics of the AgNPs were investigated using techniques including: X‐ray diffraction, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy. The SEM and TEM images showed that the nanoparticles had a spherical shape, and the mean diameter of them was 53.7 and 45 nm, respectively. The results of the disc diffusion test used for measuring the anti‐bacterial activity of the synthesised nanoparticles indicated that the formed nanoparticles possessed a suitable anti‐bacterial activity.Inspec keywords: silver, nanoparticles, antibacterial activity, nanomedicine, nanofabrication, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectraOther keywords: green synthesis, silver nanoparticles, Glaucium corniculatum Curtis extract, antibacterial activity, metal nanoparticles, biosynthesis method, X‐ray diffraction, transmission electron microscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, SEM, TEM, spherical shape, disc diffusion test, Ag