Critical aspects of sinter-hardening of prealloyed Cr–Mo steel

In recent years, growing demand for greater mechanical properties of PM steel components with competitive fabrication cost has led to significant innovations in different fields of powder metallurgy. Recent research has been focused on reaching higher performance with lower cost. To this end, the possibility of combining the conventional sintering and post-sintering processes for a particular powder composition has been introduced. Sinter-hardening is a result of the research conducted along this line. Elimination of any secondary operation such as quench-hardening by incorporating it in the sintering process (i.e. sinter-hardening) is of great interest, as it will lead to lower processing costs and equal, if not higher mechanical performance. However, to ensure the desired mechanical properties of the final component and robustness of the performance, critical aspects of the sinter-hardening process should be rigorously studied.Hence with specific attention to a Cr–Mo steel powder (FL-5305), this study deals with the influence of density on cooling rate, the effect of different sintering temperatures (e.g. 1120 °C and 1250 °C) on austenite grain size and consequently, hardenability. The microstructure development in sinter-hardened FL-5305 material has been analyzed and predicted by means of the available literature for solid steel and also using the commercial software (JMatPro 5.0) for materials assessment based on thermodynamic and kinetics modeling. Finally, inaccurate carbon control and its adverse impact on excessive formation of cementite have been addressed.     

Task scheduling mechanisms in cloud computing: A systematic review

Today, cloud computing has developed as one of the important emergent technologies in communication and Internet. It offers on demand, pay per use access to infrastructure, platforms, and applications. Due to the increase in its popularity, the huge number of requests need to be handled in an efficient manner. Task scheduling as one of the challenges in the cloud computing supports the requests for assigning a particular resource so as to perform effectively. In the resource management, task scheduling is performed where there is the dependency between tasks. Many approaches and case studies have been developed for the scheduling of these tasks. Up to now, a systematic literature review (SLR) has not been presented to discover and evaluate the task scheduling approaches in the cloud computing environment. To overcome, this paper presents an SLR‐based analysis on the task scheduling approaches that classify into (a) single cloud environments that evaluate cost‐aware, energy‐aware, multi‐objective, and QoS‐aware approaches in task scheduling; (b) multicloud environment that evaluates cost‐aware, multi‐objective, and QoS‐aware task scheduling; and (c) mobile cloud environment that is energy‐aware and QoS‐aware task scheduling. The analytical discussions are provided to show the advantages and limitations of the existing approaches.     

Cardiac motion and deformation recovery from MRI: a review

Magnetic resonance imaging (MRI) is a highly advanced and sophisticated imaging modality for cardiac motion tracking and analysis, capable of providing 3D analysis of global and regional cardiac function with great accuracy and reproducibility. In the past few years, numerous efforts have been devoted to cardiac motion recovery and deformation analysis from MR image sequences. Many approaches have been proposed for tracking cardiac motion and for computing deformation parameters and mechanical properties of the heart from a variety of cardiac MR imaging techniques. In this paper, an updated and critical review of cardiac motion tracking methods including major references and those proposed in the past ten years is provided. The MR imaging and analysis techniques surveyed are based on cine MRI, tagged MRI, phase contrast MRI, DENSE, and SENC. This paper can serve as a tutorial for new researchers entering the field.     

Superior Thermoelectric Performance of Textured Ca3Co4−xO9+δ Ceramic Nanoribbons

Calcium cobaltite Ca₃Co_4−xO_9+δ (CCO) is a promising p-type thermoelectric (TE) material for high-temperature applications in air. The grains of the material exhibit strong anisotropic properties, making texturing and nanostructuring mostly favored to improve thermoelectric performance. On the one hand multitude of interfaces are needed within the bulk material to create reflecting surfaces that can lower the thermal conductivity. On the other hand, low residual porosity is needed to improve the contact between grains and raise the electrical conductivity. In this study, CCO fibers with 100% flat cross sections in a stacked, compact form are electrospun. Then the grains within the nanoribbons in the plane of the fibers are grown. Finally, the nanoribbons are electrospun into a textured ceramic that features simultaneously a high electrical conductivity of 177 S cm⁻¹ and an immensely enhanced Seebeck coefficient of 200 µV K⁻¹ at 1073 K are assembled. The power factor of 4.68 µW cm⁻¹ K⁻² at 1073 K in air surpasses all previous CCO TE performances of nanofiber ceramics by a factor of two. Given the relatively high power factor combined with low thermal conductivity, a relatively large figure-of-merit of 0.3 at 873 K in the air for the textured nanoribbon ceramic is obtained.     

Thermal annealing effect on zinc nitride thin films deposited by reactive rf-magnetron sputtering process

Zinc nitride films were deposited by reactive radio-frequency magnetron sputtering using a zinc target in a nitrogen and argon plasma. The deposited films were annealed in either air or O₂ at 300 °C to investigate the annealing effect on the microstructure, optical properties, and electronic characteristics of zinc nitride films. It was found that the annealing process decreased the crystallinity of zinc nitride films. It was also found that the optical band gap decreased from 1.33 eV to 1.14 eV after annealing. The analysis of film composition suggested that the concentration of oxygen increased slightly after annealing. Although the conduction type of both as-deposited and annealed films were n-type, the annealed films exhibited a higher resistivity, lower carrier concentration and lower mobility than the as-deposited films. Also, it was found that the as-deposited films did not exhibit any photoconducting behavior whereas the annealed films exhibited a pronounced photoconducting behavior.     

New insight into prediction of phase behavior of natural gas hydrate by different cubic equations of state coupled with various mixing rules

Progress in hydrate thermodynamic study necessitates robust and fast models to be incorporated in reservoir simulation softwares. However, numerous models presented in the literature makes selection of the best,proper predictive model a cumbersome task. It is of industrial interest to make use of cubic equations of state(EOS) for modeling hydrate equilibria. In this regard, this study focuses on evaluation of three common EOSs including Peng–Robinson, Soave–Redlich–Kwong and Valderrama–Patel–Teja coupled with van der Waals and Platteeuw theory to predict hydrate P–T equilibrium of a real natural gas sample. Each EOS was accompanied with three mixing rules, including van der Waals(vd W),Avlonitis non-density dependent(ANDD) and general nonquadratic(GNQ). The prediction of cubic EOSs was in sufficient agreement with experimental data and with overall AARD% of less than unity. In addition, PR plus ANDD proved to be the most accurate model in this study for prediction of hydrate equilibria with AARD% of 0.166.It was observed that the accuracy of cubic EOSs studied in this paper depends on mixing rule coupled with them,especially at high-pressure conditions. Lastly, the present study does not include any adjustable parameter to be correlated with hydrate phase equilibrium data.     

Functionalization of Graphene Oxide Films with Au and MoOx Nanoparticles as Efficient p‐Contact Electrodes for Inverted Planar Perovskite Solar Cells

A graphene oxide (GO) film is functionalized with metal (Au) and metal‐oxide (MoO_x) nanoparticles (NPs) as a hole‐extraction layer for high‐performance inverted planar‐heterojunction perovskite solar cells (PSCs). These NPs can increase the work function of GO, which is confirmed with X‐ray photoelectron spectra, Kelvin probe force microscopy, and ultraviolet photoelectron spectra measurements. The down‐shifts of work functions lead to a decreased level of potential energy and hence increased V_oc of the PSC devices. Although the GO‐AuNP film shows rapid hole extraction and increased V_oc, a J_sc improvement is not observed because of localization of the extracted holes inside the AuNP that leads to rapid charge recombination, which is confirmed with transient photoelectric measurements. The power conversion efficiency (PCE) of the GO‐AuNP device attains 14.6%, which is comparable with that of the GO‐based device (14.4%). In contrast, the rapid hole extraction from perovskite to the GO‐MoO_x layer does not cause trapping of holes and delocalization of holes in the GO film accelerates rapid charge transfer to the indium tin oxide substrate; charge recombination in the perovskite/GO‐MoO_x interface is hence significantly retarded. The GO‐MoO_x device consequently shows significantly enhanced V_oc and J_sc, for which its device performance attains PCE of 16.7% with great reproducibility and enduring stability.     

Sharing spray and wait routing algorithm in opportunistic networks

Due to the instability and intermittent connectivity of links among the nodes and the lack of connectivity in opportunistic network, it is not feasible to use common routing for delivering messages. The only practical method for routing and delivering messages is to use the store-carry-forward routing method. As a case in point, spray and wait is considered to be one of the most appropriate routing methods. The efficiency of this method depends directly on the proper selection of the next hop and the number of copies when it encounters a node. In this paper, a method was proposed that constantly selects the next node and considers the number of copies a node can deliver. In the proposed method, the selection of the next node and the number of message copies to be transmitted by the next hop are based on message carrying time and the probability of message delivery. The network model, based on Markov chain, is extended for analysis. Simulation and analysis results showed that significant enhancement is obtained with the proposed method when measuring metrics such as delay, delivery ratio and copy do comparisons with similar methods.     

Down-link OFDRMA communications

Wireless Networks - Orthogonal frequency-division multiplexing with random multiple access (OFDRMA) is discussed for down-link communications, whereby a single base-station transmits information...     

Signal Integrity: Fault Modeling and Testing in High-Speed SoCs

As we approach 100 nm technology the interconnect issues are becoming one of the main concerns in the testing of gigahertz system-on-chips. Voltage distortion (noise) and delay violations (skew) contribute to the signal integrity loss and ultimately functional error, performance degradation and reliability problems. In this paper, we first define a model for integrity faults on the high-speed interconnects. Then, we present a BIST-based test methodology that includes two special cells to detect and measure noise and skew occurring on the interconnects of the gigahertz system-on-chips. Using an inexpensive test architecture the integrity information accumulated by these special cells can be scanned out for final test and reliability analysis.