Thin water films and particle morphology evolution in nanocrystalline MgO

A key question in the field of ceramics and catalysis is how and to what extent residual water in the reactive environment of a metal oxide particle powder affects particle coarsening and morphology. With X‐ray Diffraction (XRD) and Transmission Electron Microscopy (TEM), we investigated annealing‐induced morphology changes on powders of MgO nanocubes in different gaseous H₂O environments. The use of such a model system for particle powders enabled us to describe how adsorbed water that originates from short exposure to air determines the evolution of MgO grain size, morphology, and microstructure. While cubic nanoparticles with a predominant abundance of (100) surface planes retain their shape after annealing to T = 1173 K under continuous pumping with a base pressure of water p(H₂O) = 10^?5 mbar, higher water partial pressures promote mass transport on the surfaces and across interfaces of such particle systems. This leads to substantial growth and intergrowth of particles and simultaneously favors the formation of step edges and shallow protrusions on terraces. The mass transfer is promoted by thin films of water providing a two‐dimensional solvent for Mg²⁺ ion hydration. In addition, we obtained direct evidence for hydroxylation‐induced stabilization of (110) faces and step edges of the grain surfaces.     

Phospholipids and oxophospholipids in atherosclerotic plaques at different stages of plaque development

We identified and quantified the hydroperoxides, hydroxides, epoxides, isoprostanes, and core aldehydes of the major phospholipids as the main components of the oxophospholipids (a total of 5–25 pmol/μmol phosphatidylcholine) in a comparative study of human atheroma from selected stages of lesion development. The developmental stages examined included fatty streak, fibrous plaque, necrotic core, and calcified tissue. The lipid analyses were performed by normal-phase HPLC with on-line electrospray MS using conventional total lipid extracts. There was great variability in the proportions of the various oxidation products and a lack of a general trend. Specifically, the early oxidation products (hydroperoxides and epoxides) of the glycerophosphocholines were found at the advanced stages of the plaques in nearly the same relative abundance as the more advanced oxidation products (core aldehydes and acids). The anticipated linear accumulation of the more stable oxidation products with progressive development of the atherosclerotic plaque was not apparent. It is therefore suggested that lipid infiltration and/or local peroxidation is a continuous process characterized by the formation and destruction of both early and advanced products of lipid oxidation at all times. The process of lipid deposition appears to have been subject to both enzymatic and chemical modification of the normal tissue lipids. Clearly, the appearance of new and disproportionate old lipid species excludes randomness in any accumulation of oxidized LDL lipids in atheroma.     

Identification of Oxidized Phosphatidylinositols Present in OxLDL and Human Atherosclerotic Plaque

Oxidized low-density lipoprotein (OxLDL) plays an important role in initiation and progression of atherosclerosis. Proatherogenic effects of OxLDL have been attributed to bioactive phospholipids generated during LDL oxidation. It is unknown what effect oxidation has on the phosphatidylinositol (PtdIns) molecules in LDL, even though PtdIns is 6% of the total LDL phospholipid pool. We sought to identify and quantitate oxidized phosphatidylinositol (OxPtdIns) species in OxLDL and human atherosclerotic plaque. Bovine liver PtdIns was subjected to non-enzymatic and lipoxygenase-catalyzed oxidation. Reversed-phase liquid chromatography with negative ESI–MS identified and confirmed compounds by fragmentation pattern analysis from which an OxPtdIns library was generated. Twenty-three OxPtdIns molecules were identified in copper-oxidized human LDL at 0, 6, 12, 24, 30, and 48 h, and in human atherosclerotic plaque. In OxLDL, OxPtdIns species containing aldehydes and carboxylates comprised 17.3 ± 0.1 and 0.9 ± 0.2%, respectively, of total OxPtdIns in OxLDL at 48 h. Hydroperoxides and isoprostanes at 24 h (68.5 ± 0.2 and 22.8 ± 0.2%) were significantly greater than 12 h (P < 0.01) without additional changes thereafter. Hydroxides decreased with increased oxidation achieving a minimum at 24 h (5.2 ± 0.3%). Human atherosclerotic plaques contained OxPtdIns species including aldehydes, carboxylates, hydroxides, hydroperoxides and isoprostanes, comprising 18.6 ± 4.7, 1.5 ± 0.7, 16.5 ± 7.4, 33.3 ± 1.1 and 30.2 ± 3.3% of total OxPtdIns compounds. This is the first identification of OxPtdIns molecules in human OxLDL and atherosclerotic plaque. With these novel molecules identified we can now investigate their potential role in atherosclerosis.     

Starch,Sucrose, and Rezol® IL800 as Density Modifiers for Polyurethane Rigid Foams Formulated by Recycled Polyol

Waste polyurethane rigid foam (PUF) is recycled by the glycolysis process. The recycled product is used in a polyol blend, applied in a new foam formulation. Polyurethane rigid foams formulated by recycled polyols are highly dense compared to rigid foams formulated by virgin polyols. As these foams are mostly used in insulation, they make an extra mass to the main product or system that is insulated. Therefore, it is important to decrease their density as much as possible.

Some density modifiers such as starch, sucrose, and REZOL^® IL800 were investigated to recognize their effect on PUF's density.     

Photocrosslinking of styrene–isoprene–styrene; effect of benzoin and ethylene glycol dimethacrylate on physical properties

Crosslinking reaction of polymer by ultraviolet (UV) irradiation has been important in industries. In this work, photocrosslinking of styrene–isoprene–styrene (SIS) triblock copolymer in the presence of benzoin photoinitiator and a dimethacrylate monomer as crosslinking agent was investigated. Curing of samples was initiated under UV irradiation. Benzoin was used as photoinitiator because it contains chromophore group that could absorb UV irradiation. Ethylene glycol dimethacrylate (EGDMA) was used as crosslinking agent, since it has alkene functional groups that could react with the alkene group of SIS. ATR-FTIR spectra of samples show that absorption band of double bond at 1500–1600?cm^?1 decreases after UV exposure. Increasing the concentration of benzoin (0.1–1?phr) and EGDMA (1–10?phr) leads to an increase in gel content and hardness, while swelling ratio decreases. After 5?min heating at 150?°C, about 20%wt of the unirradiated compound became insoluble, because heating of compound at 150?°C causes crosslinking reaction without any irradiation.     

Optimization of process parameters using D-optimal design for synthesis of ZnO nanoparticles via sol–gel technique

The experimental conditions for the synthesis of ZnO nanoparticles to produce minimal size were optimized using the D-optimal design. The influence of process parameters involves molar ratio of the starting materials, pH and the calcination temperature on the particle size were evaluated using the polynomial regression. The optimum conditions revealed by the model for obtaining a minimum particle size of ZnO were predicted to have a molar ratio of 1.76, pH of 1.50 and calcination at 402.2 °C. The obtainable particle size upon applying the model is 22.9 nm in compare to experimental result of 18 ± 2 nm was obtained.     

喷丸强化对合金化奥贝球铁疲劳性能的影响

喷丸处理是改进金属工件疲劳性能最常规的表面处理方法。文中研究了喷丸处理对合金化奥贝球铁(AD)I疲劳性能的影响。等温淬火包括875℃保温90 min奥氏体化处理,然后在320℃、365℃和400℃进行等温处理。用直径0.4～0.6 mm的丸喷丸后的试样做旋转弯曲疲劳试验。对试样进行XRD和SEM分析,测定显微硬度和粗糙度,研究试样的疲劳性能。结果表明,在320℃、365℃和400℃等温处理的试样喷丸后疲劳强度分别增加了27.3%、33.3%和48.4%。